mi risponde così al dmesg
Code: Select all
TOMOYO Linux initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
tseg: 00b7f00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
ACPI: Checking initramfs for custom DSDT
ACPI: Core revision 20110623
ftrace: allocating 16657 entries in 66 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD E-350 Processor stepping 00
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
MCE: In-kernel MCE decoding enabled.
Booting Node 0, Processors #1 Ok.
smpboot cpu 1: start_ip = 98000
Brought up 2 CPUs
Total of 2 processors activated (6399.76 BogoMIPS).
devtmpfs: initialized
PM: Registering ACPI NVS region at b7a7a000 (323584 bytes)
PM: Registering ACPI NVS region at b7c19000 (32768 bytes)
PM: Registering ACPI NVS region at b7c47000 (274432 bytes)
RTC time: 13:49:47, date: 01/13/12
NET: Registered protocol family 16
Extended Config Space enabled on 0 nodes
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xffffffff]
pci_root PNP0A08:00: ignoring host bridge window [mem 0x000c8000-0x000dffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce1ff])
pci 0000:00:00.0: [1022:1510] type 0 class 0x000600
pci 0000:00:01.0: [1002:9802] type 0 class 0x000300
pci 0000:00:01.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
pci 0000:00:01.0: reg 14: [io 0xf000-0xf0ff]
pci 0000:00:01.0: reg 18: [mem 0xfeb00000-0xfeb3ffff]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.1: [1002:1314] type 0 class 0x000403
pci 0000:00:01.1: reg 10: [mem 0xfeb44000-0xfeb47fff]
pci 0000:00:01.1: supports D1 D2
pci 0000:00:04.0: [1022:1512] type 1 class 0x000604
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
pci 0000:00:11.0: reg 10: [io 0xf190-0xf197]
pci 0000:00:11.0: reg 14: [io 0xf180-0xf183]
pci 0000:00:11.0: reg 18: [io 0xf170-0xf177]
pci 0000:00:11.0: reg 1c: [io 0xf160-0xf163]
pci 0000:00:11.0: reg 20: [io 0xf150-0xf15f]
pci 0000:00:11.0: reg 24: [mem 0xfeb4f000-0xfeb4f3ff]
pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
pci 0000:00:12.0: reg 10: [mem 0xfeb4e000-0xfeb4efff]
pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
pci 0000:00:12.2: reg 10: [mem 0xfeb4d000-0xfeb4d0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: PME# disabled
pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
pci 0000:00:13.0: reg 10: [mem 0xfeb4c000-0xfeb4cfff]
pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
pci 0000:00:13.2: reg 10: [mem 0xfeb4b000-0xfeb4b0ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
pci 0000:00:14.1: reg 10: [io 0xf140-0xf147]
pci 0000:00:14.1: reg 14: [io 0xf130-0xf133]
pci 0000:00:14.1: reg 18: [io 0xf120-0xf127]
pci 0000:00:14.1: reg 1c: [io 0xf110-0xf113]
pci 0000:00:14.1: reg 20: [io 0xf100-0xf10f]
pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
pci 0000:00:14.2: reg 10: [mem 0xfeb40000-0xfeb43fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
pci 0000:00:14.5: reg 10: [mem 0xfeb4a000-0xfeb4afff]
pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.1: [1002:43a1] type 1 class 0x000604
pci 0000:00:15.1: supports D1 D2
pci 0000:00:15.2: [1002:43a2] type 1 class 0x000604
pci 0000:00:15.2: supports D1 D2
pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
pci 0000:00:16.0: reg 10: [mem 0xfeb49000-0xfeb49fff]
pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
pci 0000:00:16.2: reg 10: [mem 0xfeb48000-0xfeb480ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: PME# disabled
pci 0000:00:18.0: [1022:1700] type 0 class 0x000600
pci 0000:00:18.1: [1022:1701] type 0 class 0x000600
pci 0000:00:18.2: [1022:1702] type 0 class 0x000600
pci 0000:00:18.3: [1022:1703] type 0 class 0x000600
pci 0000:00:18.4: [1022:1704] type 0 class 0x000600
pci 0000:00:18.5: [1022:1718] type 0 class 0x000600
pci 0000:00:18.6: [1022:1716] type 0 class 0x000600
pci 0000:00:18.7: [1022:1719] type 0 class 0x000600
pci 0000:00:04.0: PCI bridge to [bus 01-01]
pci 0000:00:14.4: PCI bridge to [bus 02-02] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
pci 0000:03:00.0: [11ab:4380] type 0 class 0x000200
pci 0000:03:00.0: reg 10: [mem 0xfea20000-0xfea23fff 64bit]
pci 0000:03:00.0: reg 18: [io 0xe000-0xe0ff]
pci 0000:03:00.0: reg 30: [mem 0xfea00000-0xfea1ffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:15.0: PCI bridge to [bus 03-03]
pci 0000:00:15.0: bridge window [io 0xe000-0xefff]
pci 0000:00:15.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:04:00.0: [1033:0194] type 0 class 0x000c03
pci 0000:04:00.0: reg 10: [mem 0xfe900000-0xfe901fff 64bit]
pci 0000:04:00.0: PME# supported from D0 D3hot
pci 0000:04:00.0: PME# disabled
pci 0000:00:15.1: PCI bridge to [bus 04-04]
pci 0000:00:15.1: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:05:00.0: [1814:0781] type 0 class 0x000280
pci 0000:05:00.0: reg 10: [mem 0xfe800000-0xfe80ffff]
pci 0000:05:00.0: PME# supported from D0 D3hot
pci 0000:05:00.0: PME# disabled
pci 0000:00:15.2: PCI bridge to [bus 05-05]
pci 0000:00:15.2: bridge window [mem 0xfe800000-0xfe8fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE21._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE22._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:01.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009d800 - 000000000009ffff
reserve RAM buffer: 00000000b7a7a000 - 00000000b7ffffff
reserve RAM buffer: 00000000b7c09000 - 00000000b7ffffff
reserve RAM buffer: 00000000b7f00000 - 00000000b7ffffff
reserve RAM buffer: 000000022f000000 - 000000022fffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
Switched to NOHz mode on CPU #0
Switched to NOHz mode on CPU #1
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c8000-0x000dffff window]
pnp 00:00: [mem 0xd0000000-0xffffffff window]
pnp 00:00: [mem 0x00000000 window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xe0000000-0xefffffff]
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [io 0x040b]
pnp 00:02: [io 0x04d6]
pnp 00:02: [io 0x0c00-0x0c01]
pnp 00:02: [io 0x0c14]
pnp 00:02: [io 0x0c50-0x0c51]
pnp 00:02: [io 0x0c52]
pnp 00:02: [io 0x0c6c]
pnp 00:02: [io 0x0c6f]
pnp 00:02: [io 0x0cd0-0x0cd1]
pnp 00:02: [io 0x0cd2-0x0cd3]
pnp 00:02: [io 0x0cd4-0x0cd5]
pnp 00:02: [io 0x0cd6-0x0cd7]
pnp 00:02: [io 0x0cd8-0x0cdf]
pnp 00:02: [io 0x0800-0x089f]
pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0b20-0x0b3f]
pnp 00:02: [io 0x0900-0x090f]
pnp 00:02: [io 0x0910-0x091f]
pnp 00:02: [io 0xfe00-0xfefe]
pnp 00:02: [io 0x0060-0x005f disabled]
pnp 00:02: [io 0x0064-0x0063 disabled]
pnp 00:02: [mem 0xfec00000-0xfec00fff]
pnp 00:02: [mem 0xfee00000-0xfee00fff]
pnp 00:02: [mem 0xfed80000-0xfed8ffff]
pnp 00:02: [mem 0xfed61000-0xfed70fff]
pnp 00:02: [mem 0xfec10000-0xfec10fff]
pnp 00:02: [mem 0xfed00000-0xfed00fff]
pnp 00:02: [mem 0xffe00000-0xffffffff]
system 00:02: [io 0x040b] has been reserved
system 00:02: [io 0x04d6] has been reserved
system 00:02: [io 0x0c00-0x0c01] has been reserved
system 00:02: [io 0x0c14] has been reserved
system 00:02: [io 0x0c50-0x0c51] has been reserved
system 00:02: [io 0x0c52] has been reserved
system 00:02: [io 0x0c6c] has been reserved
system 00:02: [io 0x0c6f] has been reserved
system 00:02: [io 0x0cd0-0x0cd1] has been reserved
system 00:02: [io 0x0cd2-0x0cd3] has been reserved
system 00:02: [io 0x0cd4-0x0cd5] has been reserved
system 00:02: [io 0x0cd6-0x0cd7] has been reserved
system 00:02: [io 0x0cd8-0x0cdf] has been reserved
system 00:02: [io 0x0800-0x089f] has been reserved
system 00:02: [io 0x0b20-0x0b3f] has been reserved
system 00:02: [io 0x0900-0x090f] has been reserved
system 00:02: [io 0x0910-0x091f] has been reserved
system 00:02: [io 0xfe00-0xfefe] has been reserved
system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved
system 00:02: [mem 0xffe00000-0xffffffff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:03: [io 0x0295-0x0296]
pnp 00:03: [io 0x0a00-0x0a01]
system 00:03: [io 0x0295-0x0296] has been reserved
system 00:03: [io 0x0a00-0x0a01] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [io 0x03f8-0x03ff]
pnp 00:04: [irq 4]
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:05: [dma 4]
pnp 00:05: [io 0x0000-0x000f]
pnp 00:05: [io 0x0081-0x0083]
pnp 00:05: [io 0x0087]
pnp 00:05: [io 0x0089-0x008b]
pnp 00:05: [io 0x008f]
pnp 00:05: [io 0x00c0-0x00df]
pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:06: [io 0x0070-0x0071]
pnp 00:06: [irq 8]
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: [io 0x0061]
pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:08: [io 0x0010-0x001f]
pnp 00:08: [io 0x0022-0x003f]
pnp 00:08: [io 0x0044-0x005f]
pnp 00:08: [io 0x0072-0x007f]
pnp 00:08: [io 0x0080]
pnp 00:08: [io 0x0084-0x0086]
pnp 00:08: [io 0x0088]
pnp 00:08: [io 0x008c-0x008e]
pnp 00:08: [io 0x0090-0x009f]
pnp 00:08: [io 0x00a2-0x00bf]
pnp 00:08: [io 0x00e0-0x00ef]
pnp 00:08: [io 0x04d0-0x04d1]
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [io 0x00f0-0x00ff]
pnp 00:09: [irq 13]
pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [io 0x0060]
pnp 00:0b: [io 0x0064]
pnp 00:0b: [irq 1]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:0c: [irq 12]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
pnp 00:0d: [mem 0xb8000000-0xcfffffff]
system 00:0d: [mem 0xb8000000-0xcfffffff] has been reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0e: [mem 0xfed00000-0xfed003ff]
pnp 00:0e: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:04.0: BAR 14: assigned [mem 0xf0000000-0xf01fffff]
pci 0000:00:04.0: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
pci 0000:00:04.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:04.0: PCI bridge to [bus 01-01]
pci 0000:00:04.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf01fffff]
pci 0000:00:04.0: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 02-02]
pci 0000:00:15.0: PCI bridge to [bus 03-03]
pci 0000:00:15.0: bridge window [io 0xe000-0xefff]
pci 0000:00:15.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:15.1: PCI bridge to [bus 04-04]
pci 0000:00:15.1: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:15.2: PCI bridge to [bus 05-05]
pci 0000:00:15.2: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:15.0: setting latency timer to 64
pci 0000:00:15.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:15.1: setting latency timer to 64
pci 0000:00:15.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:15.2: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xd0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf01fffff]
pci_bus 0000:01: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:02: resource 7 [mem 0xd0000000-0xffffffff]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:04: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:05: resource 1 [mem 0xfe800000-0xfe8fffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 8532k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800b3a7a000 - ffff8800b7a7a000
software IO TLB at phys 0xb3a7a000 - 0xb7a7a000
audit: initializing netlink socket (disabled)
type=2000 audit(1326462586.830:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15181
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
vesafb: mode is 800x600x16, linelength=1600, pages=16
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011800000, using 1875k, total 16384k
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
ERST: Table is not found!
GHES: HEST is not enabled!
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
Registering the dns_resolver key type
PM: Checking hibernation image partition UUID=c2807d43-e188-40fa-8d96-09950c4ac314
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 12:111:837
rtc_cmos 00:06: setting system clock to 2012-01-13 13:49:48 UTC (1326462588)
BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
Freeing unused kernel memory: 728k freed
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 1856k freed
Freeing unused kernel memory: 72k freed
dracut: dracut-013-2
udevd[83]: starting version 168
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
checking generic (d0000000 1000000) vs hw (d0000000 10000000)
fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
radeon 0000:00:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
radeon 0000:00:01.0: setting latency timer to 64
[drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x174B:0x1001).
[drm] register mmio base: 0xFEB00000
[drm] register mmio size: 262144
ATOM BIOS: AMD
radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
radeon 0000:00:01.0: GTT: 512M 0x0000000018000000 - 0x0000000037FFFFFF
mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[drm] Detected VRAM RAM=384M, BAR=256M
[drm] RAM width 32bits DDR
[TTM] Zone kernel: Available graphics memory: 3887704 kiB.
[TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[TTM] Initializing pool allocator.
[drm] radeon: 384M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:00:01.0: irq 40 for MSI/MSI-X
radeon 0000:00:01.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading PALM Microcode
radeon 0000:00:01.0: WB enabled
[drm] ring test succeeded in 1 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
failed to evaluate ATIF got AE_BAD_PARAMETER
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] HDMI-A
[drm] HPD1
[drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY
[drm] Connector 1:
[drm] DVI-D
[drm] HPD2
[drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY
[drm] Connector 2:
[drm] VGA
[drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Radeon display connector HDMI-A-1: No monitor connected or invalid EDID
[drm] Radeon display connector DVI-D-1: No monitor connected or invalid EDID
[drm] Radeon display connector VGA-1: Found valid EDID
[drm] Internal thermal controller without fan control
[drm] radeon: power management initialized
[drm] fb mappable at 0xD0141000
[drm] vram apper at 0xD0000000
[drm] size 4325376
[drm] fb depth is 24
[drm] pitch is 5632
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.11.0 20080528 for 0000:00:01.0 on minor 0
dracut: Starting plymouth daemon
Refined TSC clocksource calibration: 1600.015 MHz.
Switching to clocksource tsc
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
libata version 3.00 loaded.
pata_atiixp 0000:00:14.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
scsi0 : pata_atiixp
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
scsi1 : pata_atiixp
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf100 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf108 irq 15
ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 1
QUIRK: Enable AMD PLL fix
ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb4e000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 3.1.6-desktop-nrj.69mib ohci_hcd
usb usb1: SerialNumber: 0000:00:12.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata3: SATA max UDMA/133 abar m1024@0xfeb4f000 port 0xfeb4f100 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfeb4f000 port 0xfeb4f180 irq 19
ata5: SATA max UDMA/133 abar m1024@0xfeb4f000 port 0xfeb4f200 irq 19
ata6: SATA max UDMA/133 abar m1024@0xfeb4f000 port 0xfeb4f280 irq 19
ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xfeb4d000
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.1.6-desktop-nrj.69mib ehci_hcd
usb usb2: SerialNumber: 0000:00:12.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 17, io mem 0xfeb4b000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.1.6-desktop-nrj.69mib ehci_hcd
usb usb3: SerialNumber: 0000:00:13.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:16.2: EHCI Host Controller
ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:16.2: debug port 1
ehci_hcd 0000:00:16.2: irq 17, io mem 0xfeb48000
ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 3.1.6-desktop-nrj.69mib ehci_hcd
usb usb4: SerialNumber: 0000:00:16.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb4c000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 3.1.6-desktop-nrj.69mib ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb4a000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 3.1.6-desktop-nrj.69mib ohci_hcd
usb usb6: SerialNumber: 0000:00:14.5
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:16.0: OHCI Host Controller
ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:16.0: irq 18, io mem 0xfeb49000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI Host Controller
usb usb7: Manufacturer: Linux 3.1.6-desktop-nrj.69mib ohci_hcd
usb usb7: SerialNumber: 0000:00:16.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
usb 2-1: new high speed USB device number 2 using ehci_hcd
usb 2-1: New USB device found, idVendor=0ac8, idProduct=3420
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: Venus USB2.0 Camera
usb 2-1: Manufacturer: Vimicro Corp.
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: WDC WD10EACS-00D6B1, 01.01A01, max UDMA/133
ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: ATA-8: ST9160310AS, 0303, max UDMA/133
ata4.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA WDC WD10EACS-00D 01.0 PQ: 0 ANSI: 5
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA ST9160310AS 0303 PQ: 0 ANSI: 5
Uniform Multi-Platform E-IDE driver
sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 2:0:0:0: [sda] Attached SCSI disk
sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7 >
sd 3:0:0:0: [sdb] Attached SCSI disk
usb 1-2: new full speed USB device number 2 using ohci_hcd
usb 1-2: New USB device found, idVendor=046d, idProduct=c52e
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2: Product: USB Receiver
usb 1-2: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb1/1-2/1-2:1.0/input/input0
generic-usb 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:12.0-2/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb1/1-2/1-2:1.1/input/input1
generic-usb 0003:046D:C52E.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-2/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 1-5: new full speed USB device number 3 using ohci_hcd
usb 1-5: New USB device found, idVendor=0cf3, idProduct=3005
usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
PM: Marking nosave pages: 000000000009d000 - 0000000000100000
PM: Marking nosave pages: 00000000b7a7a000 - 00000000b7c08000
PM: Marking nosave pages: 00000000b7c09000 - 00000000b7c8a000
PM: Marking nosave pages: 00000000b7f00000 - 0000000100001000
PM: Basic memory bitmaps created
PM: Basic memory bitmaps freed
PM: Starting manual resume from disk
PM: Hibernation image partition 8:21 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null)
dracut: Checking ext4: /dev/disk/by-uuid/e47234e7-c08c-4ec0-acbf-dbc011a8e118
dracut: issuing e2fsck -a /dev/disk/by-uuid/e47234e7-c08c-4ec0-acbf-dbc011a8e118
dracut: /dev/disk/by-uuid/e47234e7-c08c-4ec0-acbf-dbc011a8e118: clean, 204746/983488 files, 2115340/3933493 blocks
dracut: Remounting /dev/disk/by-uuid/e47234e7-c08c-4ec0-acbf-dbc011a8e118 with -o acl,noatime,ro
EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: acl
dracut: Mounted root filesystem /dev/sdb6
dracut: Switching root
Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
systemd[1]: systemd 29 running in system mode. (+PAM +LIBWRAP +AUDIT -SELINUX +SYSVINIT +LIBCRYPTSETUP; mandriva)
NET: Registered protocol family 10
systemd[1]: Set hostname to <localhost.localdomain>.
systemd[1]: /etc/mtab is not a symlink or not pointing to /proc/self/mounts. This is not supported anymore. Please make sure to replace this file by a symlink to avoid incorrect or misleading mount(8) output.
systemd[1]: [/etc/rc.d/init.d/iptables:18] Failed to add LSB Provides name firewall.service, ignoring: File exists
systemd[1]: Path /sys/kernel/security is already a mount point, refusing start for sys-kernel-security.automount
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 3:0:0:0: Attached scsi generic sg1 type 0
udevd[375]: starting version 168
EXT4-fs (sdb6): re-mounted. Opts: acl
udevd[375]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:73
udevd[375]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:76
udevd[375]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:77
udevd[375]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:78
udevd[375]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:79
udevd[375]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:80
udevd[375]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:81
udevd[375]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:82
udevd[375]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:83
udevd[375]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:84
udevd[375]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:85
udevd[375]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:86
udevd[375]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:87
udevd[375]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:88
udevd[375]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:89
udevd[375]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:90
udevd[375]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:91
udevd[375]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:92
udevd[375]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:93
udevd[375]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:94
udevd[375]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:95
udevd[375]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:96
udevd[375]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:97
udevd[375]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:98
udevd[375]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:99
udevd[375]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:100
udevd[375]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:101
udevd[375]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:105
udevd[375]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:106
udevd[375]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:107
udevd[375]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:108
udevd[375]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:109
udevd[375]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:110
udevd[375]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:111
udevd[375]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:112
udevd[375]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:113
udevd[375]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:114
udevd[375]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:115
udevd[375]: NAME="%k" is ignored, because it breaks kernel supplied names, please remove it from /etc/udev/rules.d/51-hso-udev.rules:124
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
SP5100 TCO timer: mmio address 0xbafe00 already in use
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
Linux media interface: v0.10
xhci_hcd 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
xhci_hcd 0000:04:00.0: setting latency timer to 64
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 8
xhci_hcd 0000:04:00.0: irq 17, io mem 0xfe900000
xhci_hcd 0000:04:00.0: irq 41 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 42 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 43 for MSI/MSI-X
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 3.1.6-desktop-nrj.69mib xhci_hcd
usb usb8: SerialNumber: 0000:04:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 9
usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 3.1.6-desktop-nrj.69mib xhci_hcd
usb usb9: SerialNumber: 0000:04:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
cfg80211: Calling CRDA to update world regulatory domain
sky2: driver version 1.29
sky2 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
sky2 0000:03:00.0: setting latency timer to 64
sky2 0000:03:00.0: Yukon-2 UL 2 chip revision 0
sky2 0000:03:00.0: irq 44 for MSI/MSI-X
sky2 0000:03:00.0: eth0: addr dc:9c:52:07:a7:7d
2:2: cannot get min/max values for control 2 (id 2)
2:2: cannot get min/max values for control 2 (id 2)
usbcore: registered new interface driver snd-usb-audio
Linux video capture interface: v2.00
usb 8-1: new high speed USB device number 2 using xhci_hcd
uvcvideo: Found UVC 1.00 device Venus USB2.0 Camera (0ac8:3420)
input: Venus USB2.0 Camera as /devices/pci0000:00/0000:00:12.2/usb2/2-1/2-1:1.0/input/input5
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
usb 8-1: New USB device found, idVendor=059f, idProduct=0351
usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 8-1: Product: LaCie Hard Drive USB
usb 8-1: Manufacturer: LaCie
usb 8-1: SerialNumber: 10000E000974A144
snd_hda_intel 0000:00:01.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
hda-intel: Using LPIB position fix
snd_hda_intel 0000:00:01.1: irq 45 for MSI/MSI-X
snd_hda_intel 0000:00:01.1: setting latency timer to 64
hda-intel: Enable sync_write for stable communication
HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
input: HD-Audio Generic HDMI/DP as /devices/pci0000:00/0000:00:01.1/sound/card1/input6
snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
hda-intel: Using LPIB position fix
hda-intel: Enable sync_write for stable communication
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
rt2800pci 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
rt2800pci 0000:05:00.0: setting latency timer to 64
mtp-probe[1146]: checking bus 8, device 2: "/sys/devices/pci0000:00/0000:00:15.1/0000:04:00.0/usb8/8-1"
mtp-probe[795]: checking bus 1, device 2: "/sys/devices/pci0000:00/0000:00:12.0/usb1/1-2"
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Registered led device: rt2800pci-phy0::radio
Registered led device: rt2800pci-phy0::assoc
Registered led device: rt2800pci-phy0::quality
Bluetooth: Generic Bluetooth USB driver ver 0.6
xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
mtp-probe[1146]: bus: 8, device: 2 was not an MTP device
mtp-probe[795]: bus: 1, device: 2 was not an MTP device
mtp-probe[1234]: checking bus 8, device 2: "/sys/devices/pci0000:00/0000:00:15.1/0000:04:00.0/usb8/8-1"
mtp-probe[1236]: checking bus 1, device 2: "/sys/devices/pci0000:00/0000:00:12.0/usb1/1-2"
SKU: Nid=0x1d sku_cfg=0x4005e601
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000005
SKU: customization=0x000000e6
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
hda_codec: ALC892: BIOS auto-probing.
autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x11/0x0
inputs: Rear Mic=0x18 Front Mic=0x19 Line=0x1a
dig-in=0x1f
realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0892
padlock_aes: VIA PadLock not detected.
Intel AES-NI instructions are not detected.
usbcore: registered new interface driver btusb
xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
mtp-probe[1234]: bus: 8, device: 2 was not an MTP device
mtp-probe[1236]: bus: 1, device: 2 was not an MTP device
Initializing USB Mass Storage driver...
scsi6 : usb-storage 8-1:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver uas
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
scsi 6:0:0:0: Direct-Access SEAGATE ST3250823A 3.06 PQ: 0 ANSI: 2
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/232 GiB)
xhci_hcd 0000:04:00.0: WARN: Stalled endpoint
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 53 00 00 08
xhci_hcd 0000:04:00.0: WARN: Stalled endpoint
sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
xhci_hcd 0000:04:00.0: WARN: Stalled endpoint
xhci_hcd 0000:04:00.0: WARN: Stalled endpoint
sdc: sdc1
xhci_hcd 0000:04:00.0: WARN: Stalled endpoint
xhci_hcd 0000:04:00.0: WARN: Stalled endpoint
sd 6:0:0:0: [sdc] Attached SCSI disk
xhci_hcd 0000:04:00.0: WARN: Stalled endpoint
ata_id[1396]: HDIO_GET_IDENTITY failed for '/dev/sdc'
xhci_hcd 0000:04:00.0: WARN: Stalled endpoint
xhci_hcd 0000:04:00.0: WARN: Stalled endpoint
Adding 8392028k swap on /dev/sdb5. Priority:0 extents:1 across:8392028k
systemd-fsck[1420]: /dev/sdb7: clean, 8618/4161536 files, 2210468/16628824 blocks
EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: acl
systemd-tmpfiles[1589]: [/usr/lib/tmpfiles.d/legacy.conf:22] Unknown group 'lock'.
systemd[1]: systemd-tmpfiles-setup.service: main process exited, code=exited, status=1
systemd[1]: Unit systemd-tmpfiles-setup.service entered failed state.
acpid[1679]: starting up with proc fs
bluetoothd[1650]: Bluetooth deamon 4.93
acpid[1679]: 5 rules loaded
acpid[1679]: waiting for events: event logging is off
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
/dev/vmmon[1926]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[1926]: Initial HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=0 anyDisabled=1
/dev/vmmon[1926]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=0 anyDisabled=1
/dev/vmmon[1926]: Module vmmon: initialized
[1937]: VMCI: shared components initialized.
[1937]: VMCI: host components initialized.
[1937]: VMCI: Module registered (name=vmci,major=10,minor=57).
[1937]: VMCI: Using host personality
[1937]: VMCI: Module (name=vmci) is initialized
fuse init (API version 7.17)
ppdev: user-space parallel port driver
/dev/vmnet: open called by PID 2055 (vmnet-netifup)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 2059 (vmnet-dhcpd)
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 2073 (vmnet-natd)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 2074 (vmnet-netifup)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 2081 (vmnet-dhcpd)
/dev/vmnet: port on hub 8 successfully opened
sky2 0000:03:00.0: eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
/dev/vmnet: open called by PID 2048 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-wlan0: device is wireless, enabling SMAC
bridge-wlan0: up
ADDRCONF(NETDEV_UP): wlan0: link is not ready
bridge-wlan0: attached
bridge-wlan0: disabling the bridge
bridge-wlan0: down
bridge-wlan0: detached
userif-2: sent link down event.
userif-2: sent link up event.
NET: Registered protocol family 17
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
sky2 0000:03:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
/dev/vmnet: open called by PID 2048 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: up
bridge-eth0: attached
userif-2: sent link down event.
userif-2: sent link up event.
userif-2: sent link down event.
userif-2: sent link up event.
vmnet1: no IPv6 routers present
vmnet8: no IPv6 routers present
ehci_hcd 0000:00:12.2: PCI INT B disabled
ehci_hcd 0000:00:12.2: PME# enabled
ohci_hcd 0000:00:13.0: PCI INT A disabled
ehci_hcd 0000:00:13.2: PCI INT B disabled
ehci_hcd 0000:00:13.2: PME# enabled
ohci_hcd 0000:00:14.5: PCI INT C disabled
ohci_hcd 0000:00:16.0: PCI INT A disabled
ehci_hcd 0000:00:16.2: PCI INT B disabled
ehci_hcd 0000:00:16.2: PME# enabled
ehci_hcd 0000:00:12.2: BAR 0: set to [mem 0xfeb4d000-0xfeb4d0ff] (PCI address [0xfeb4d000-0xfeb4d0ff])
ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)
ehci_hcd 0000:00:12.2: PME# disabled
ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
eth0: no IPv6 routers present
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
[fglrx] Maximum main memory to use for locked dma buffers: 7367 MBytes.
[fglrx] vendor: 1002 device: 9802 count: 1
[fglrx] ioport: bar 1, base 0xf000, size: 0x100
radeon 0000:00:01.0: setting latency timer to 64
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 8.92.6 [Nov 9 2011] with 1 minors
ehci_hcd 0000:00:13.2: BAR 0: set to [mem 0xfeb4b000-0xfeb4b0ff] (PCI address [0xfeb4b000-0xfeb4b0ff])
ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)
ehci_hcd 0000:00:13.2: PME# disabled
ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:16.2: BAR 0: set to [mem 0xfeb48000-0xfeb480ff] (PCI address [0xfeb48000-0xfeb480ff])
ehci_hcd 0000:00:16.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)
ehci_hcd 0000:00:16.2: PME# disabled
ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[fglrx:__gart_init] *ERROR* Gps_CreateGPS failed
[fglrx:gal_init] *ERROR* Failed to initialize gal
[fglrx:mc_heap_init] *ERROR* Fail to initialize GAL
[fglrx:firegl_init_pcie] *ERROR* GAL initialization failure
ata3.00: configured for UDMA/133
ata3: EH complete
ata4.00: configured for UDMA/133
ata4: EH complete
xhci_hcd 0000:04:00.0: WARN: Stalled endpoint
xhci_hcd 0000:04:00.0: WARN: Stalled endpoint
xhci_hcd 0000:04:00.0: WARN: Stalled endpoint
xhci_hcd 0000:04:00.0: WARN: Stalled endpoint
xhci_hcd 0000:04:00.0: WARN: Stalled endpoint
xhci_hcd 0000:04:00.0: WARN: Stalled endpoint
EXT4-fs (sdb6): re-mounted. Opts: acl,commit=0
EXT4-fs (sdb7): re-mounted. Opts: acl,commit=0
xhci_hcd 0000:04:00.0: WARN: Stalled endpoint
xhci_hcd 0000:04:00.0: WARN: Stalled endpoint