powertop

Richieste di programmi e di intervento del MIB
Post Reply
User avatar
promeneur
Utente senior
Utente senior
Posts: 547
Joined: 6 February 2009, 17:47
ROSA: -
OpenMandriva: 2010.3 i586
Kernel: 3.5.7 nrj dsktp pae
Desktop: MIB kde 4.8.4
country: France

powertop

Post by promeneur »

the current powertop 1.11 is not compliant with kernel 3.x.y

please supply powertop 2.1

https://01.org/powertop/downloads

thanks
Last edited by promeneur on 25 August 2012, 15:17, edited 1 time in total.
Asus M2N, AMD Athlon 64 X2 5000+, 8 GB, Asus Nvidia 210 silent, Linksys WMP600N, Plugable USB-BT4LE Bluetooth 4.0 Adapter, lecteur multicarte Addonics AEIDDSAU, HP LaserJet 1220

User avatar
promeneur
Utente senior
Utente senior
Posts: 547
Joined: 6 February 2009, 17:47
ROSA: -
OpenMandriva: 2010.3 i586
Kernel: 3.5.7 nrj dsktp pae
Desktop: MIB kde 4.8.4
country: France

Re: powertop

Post by promeneur »

i compiled and install powertop 2.1

it works well
Asus M2N, AMD Athlon 64 X2 5000+, 8 GB, Asus Nvidia 210 silent, Linksys WMP600N, Plugable USB-BT4LE Bluetooth 4.0 Adapter, lecteur multicarte Addonics AEIDDSAU, HP LaserJet 1220

User avatar
GvMariani
Collaboratore
Collaboratore
Posts: 610
Joined: 27 July 2009, 11:31
ROSA: 2016.1 Fresh R10
OpenMandriva: -
Kernel: 4.19.13-nrj-desktop
Desktop: Plasma 5
country: Italy
Location: Cologno Monzese (MI) - Italia

Re: powertop

Post by GvMariani »

promeneur wrote:i compiled and install powertop 2.1
it works well
Then why not try to make a rpm package and submit it for inclusion in the MIB Repos?
We are always searching for "new hands" here...

GvM

User avatar
serma
Utente junior
Utente junior
Posts: 33
Joined: 9 June 2012, 15:32
ROSA: mdv2011
OpenMandriva: 2011upROSA2012LTS
Kernel: 3.8.3-nrj-laptop
Desktop: kde 4.8.5
country: el

Re: powertop

Post by serma »

powertop 2.1 for ROSA2012LTS ?
PowerTOP 1.98
Bad Autosuspend for unknown USB device 1-1.1 (04d9:2519)
Bad Autosuspend for unknown USB device 2-1 (8087:0020)
Bad Autosuspend for USB device EHCI Host Controller [usb1]
Bad Autosuspend for USB device EHCI Host Controller [usb2]
Bad Autosuspend for USB device HP Webcam-101 [SuYin]
Bad Autosuspend for unknown USB device 1-1 (8087:0020)
Good Wireless Power Saving for interface wlan0
Good Enable SATA link power management for /dev/sda
Good VM writeback timeout
Good Enable Audio codec power management
Good Runtime PM for PCI Device Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express)
Good Runtime PM for PCI Device Intel Corporation Core Processor DRAM Controller
Good Runtime PM for PCI Device Intel Corporation Core Processor Integrated Graphics Controller
Good Runtime PM for PCI Device Intel Corporation 5 Series/3400 Series Chipset HECI Controller
Good Runtime PM for PCI Device Intel Corporation 5 Series/3400 Series Chipset High Definition Audio
Good Runtime PM for PCI Device Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1
Good Runtime PM for PCI Device Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2
Good Runtime PM for PCI Device Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller
Good Runtime PM for PCI Device Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller
Good Runtime PM for PCI Device Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller
Good Runtime PM for PCI Device Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller
Good Wake-on-lan status for device eth0
Good Wake-on-lan status for device wlan0
Good Using 'ondemand' cpufreq governor
PowerTOP 1.98 work fine

for admin
show spoiler»
dont work
Last edited by serma on 6 October 2012, 12:43, edited 4 times in total.

User avatar
promeneur
Utente senior
Utente senior
Posts: 547
Joined: 6 February 2009, 17:47
ROSA: -
OpenMandriva: 2010.3 i586
Kernel: 3.5.7 nrj dsktp pae
Desktop: MIB kde 4.8.4
country: France

Re: powertop

Post by promeneur »

why do you say it does not work ?

powertop is not a setting tool
powertop displays only states about power saving and makes recommandations

"bad" means you must configure your system according to have "good" state

with 2.1 to test the "good" state you can click on "bad" then the device is set to power saving state. it is not memorized.

i advise you to install "laptop-mode"
with this tool it is easier to set device in saving mode (by default most of them are set in "good" state by laptop-mode)

for device not managed by laptop-mode you must launch powertop in "html" mode then display the html result and see the command to set device in saving mode then put the command in rc.local file

note : if your mouse is an usb one becareful this may unactivate it then to activate it just press the wheel or the right button

in laptop-mode you can blacklist some device

note : laptop-mode override cpufreq settings
Asus M2N, AMD Athlon 64 X2 5000+, 8 GB, Asus Nvidia 210 silent, Linksys WMP600N, Plugable USB-BT4LE Bluetooth 4.0 Adapter, lecteur multicarte Addonics AEIDDSAU, HP LaserJet 1220

Post Reply