Problemi con KMS e Kernel 2.6.38.2

Richieste generiche di aiuto
User avatar
GiuX
Utente
Utente
Posts: 238
Joined: 6 May 2009, 10:21
ROSA: Fresh
OpenMandriva: -
Kernel: 3.6.11nrjQL
Desktop: KDE 4.9.5
country: Italia

Problemi con KMS e Kernel 2.6.38.2

Post by GiuX »

Salve a tutti,
ho un problema che non riesco a risolvere: ho installato il kernel 2.6.38.2desktop.nrj MIB, ma non riesco a far partire il KMS... Cioè, quando inserisco la stringa radeon.modeset=1 al boot, il sistema smette di caricare nel momento in cui avviene la "sgranatura" dei caratteri, e lo schermo diventa nero e non va più avanti... posto il file Xorg.0.log che esce dal userspace modesetting:


X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux_2.6.22.12-server-1mdv Mandriva
Current Operating System: Linux localhost 2.6.38.2-desktop-nrj.69mib #1 SMP PREEMPT Tue Mar 29 16:40:11 CEST 2011 x86_64
Kernel command line: BOOT_IMAGE=2.6.38.2-desktop-nrj.69mib root=UUID=304986f2-ab92-4627-a271-25ee3cb45b0d resume=UUID=1ed7a621-c876-47bc-9a53-6f1bd9c52cb6 splash=silent
Build Date: 04 May 2010 09:54:43PM

Current version of pixman: 0.21.2
Before reporting problems, check http://qa.mandriva.com
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Apr 24 20:27:30 2011
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "layout1"
(**) |-->Screen "screen1" (0)
(**) | |-->Monitor "monitor1"
(**) | |-->Device "device1"
(**) Option "DontZap" "False"
(**) Option "AllowMouseOpenFail"
(**) Option "DRI2" "on"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
catalogue:/etc/X11/fontpath.d
(==) ModulePath set to "/usr/lib64/xorg/extra-modules,/usr/lib64/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AutoAddDevices.
(II) Loader magic: 0x7c7880
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 8

(--) PCI:*(0:1:0:0) 1002:95c4:1179:ff1e ATI Technologies Inc Mobility Radeon HD 3400 Series rev 0, Mem @ 0xc0000000/268435456, 0xd6300000/65536, I/O @ 0x00005000/256, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded by default.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "v4l"
(II) Loading /usr/lib64/xorg/modules/drivers/v4l_drv.so
(II) Module v4l: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 0.1.1
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "radeon"
(II) Loading /usr/lib64/xorg/modules/drivers/radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 6.14.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "extmod"
(II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "radeon"
(II) Reloading /usr/lib64/xorg/modules/drivers/radeon_drv.so
(II) v4l driver for Video4Linux
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, ATI Radeon HD 4200, ATI Radeon 4100,
ATI Mobility Radeon HD 4200, ATI Mobility Radeon 4100,
ATI Radeon HD 4290, ATI Radeon HD 4250, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6250 Graphics, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5900 Series, ATI Radeon HD 5900 Series,
ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 5700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, AMD Radeon HD 6900 Series,
AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for v4l
(II) [KMS] drm report modesetting isn't supported.
(II) RADEON(0): TOTO SAYS 00000000d6300000
(II) RADEON(0): MMIO registers at 0x00000000d6300000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(**) RADEON(0): Option "EnablePageFlip" "on"
(**) RADEON(0): Option "AccelDFS" "on"
(**) RADEON(0): Option "ColorTiling" "on"
(**) RADEON(0): Option "RenderAccel" "on"
(**) RADEON(0): Option "AccelMethod" "EXA"
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib64/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Mobility Radeon HD 3400 Series" (ChipID = 0x95c4)
(--) RADEON(0): Linear framebuffer at 0x00000000c0000000
(II) RADEON(0): PCIE card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib64/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): ATOM BIOS detected
(II) RADEON(0): ATOM BIOS Rom:
SubsystemVendorID: 0x1179 SubsystemID: 0xff1c
IOBaseAddress: 0x5000
Filename: 26716Q.bin
BIOS Bootup Message:
TOS_POTOMAC_DDR2 M82 GDDR2_16Mx16 64bit 128MB 680e/500m

(II) RADEON(0): Framebuffer space used by Firmware (kb): 16
(II) RADEON(0): Start of VRAM area used by Firmware: 0xfffc000
(II) RADEON(0): AtomBIOS requests 16kB of VRAM scratch space
(II) RADEON(0): AtomBIOS VRAM scratch base: 0xfffc000
(II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEON(0): Default Engine Clock: 680000
(II) RADEON(0): Default Memory Clock: 500000
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEON(0): Maximum Pixel Clock: 400000
(II) RADEON(0): Reference Clock: 27000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.33.0
(**) RADEON(0): Page Flipping disabled on r5xx and newer chips.

(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Detected total video RAM=262144K, accessible=262144K (PCI BAR=262144K)
(--) RADEON(0): Mapped VideoRAM: 262144 kByte (64 bit DDR SDRAM)
(II) RADEON(0): Color tiling disabled
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): PLL parameters: rf=2700 rd=12 min=90000 max=120000; xclk=40000
(WW) RADEON(0): LVDS Info:
XRes: 1280, YRes: 800, DotClock: 68940
HBlank: 128, HOverPlus: 16, HSyncWidth: 48
VBlank: 16, VOverPlus: 1, VSyncWidth: 3
(II) RADEON(0): Output LVDS using monitor section monitor1
(II) RADEON(0): I2C bus "LVDS" initialized.
(II) RADEON(0): Output VGA-0 has no monitor section
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output HDMI-0 has no monitor section
(II) RADEON(0): I2C bus "HDMI-0" initialized.
(II) RADEON(0): Port0:
XRANDR name: LVDS
Connector: LVDS
LCD1: INTERNAL_KLDSCP_LVTMA
DDC reg: 0x7f68
(II) RADEON(0): Port1:
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_KLDSCP_DAC1
DDC reg: 0x7e40
(II) RADEON(0): Port2:
XRANDR name: HDMI-0
Connector: HDMI-A
DFP1: INTERNAL_UNIPHY
DDC reg: 0x7e50
(II) RADEON(0): I2C device "LVDS:ddc2" registered at address 0xA0.
(II) RADEON(0): EDID vendor "SEC", prod id 14145
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: SEC Model: 3741 Serial#: 0
(II) RADEON(0): Year: 2007 Week: 0
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.587 redY: 0.344 greenX: 0.320 greenY: 0.541
(II) RADEON(0): blueX: 0.155 blueY: 0.130 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1296 h_sync_end 1344 h_blank_end 1408 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
(II) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): SAMSUNG
(II) RADEON(0): 154AT07-T01
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff004ca3413700000000
(II) RADEON(0): 00110103802115780a42d59658528a27
(II) RADEON(0): 21505400000001010101010101010101
(II) RADEON(0): 010101010101ee1a0080502010301030
(II) RADEON(0): 13004bcf100000190000000f00000000
(II) RADEON(0): 00000000002387026400000000fe0053
(II) RADEON(0): 414d53554e470a2020202020000000fe
(II) RADEON(0): 00313534415430372d5430310a200022
finished output detect: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
finished output detect: 1
(II) RADEON(0): I2C device "HDMI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
finished output detect: 2
finished all detect
(II) RADEON(0): EDID vendor "SEC", prod id 14145
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: SEC Model: 3741 Serial#: 0
(II) RADEON(0): Year: 2007 Week: 0
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.587 redY: 0.344 greenX: 0.320 greenY: 0.541
(II) RADEON(0): blueX: 0.155 blueY: 0.130 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1296 h_sync_end 1344 h_blank_end 1408 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
(II) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): SAMSUNG
(II) RADEON(0): 154AT07-T01
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff004ca3413700000000
(II) RADEON(0): 00110103802115780a42d59658528a27
(II) RADEON(0): 21505400000001010101010101010101
(II) RADEON(0): 010101010101ee1a0080502010301030
(II) RADEON(0): 13004bcf100000190000000f00000000
(II) RADEON(0): 00000000002387026400000000fe0053
(II) RADEON(0): 414d53554e470a2020202020000000fe
(II) RADEON(0): 00313534415430372d5430310a200022
(II) RADEON(0): EDID vendor "SEC", prod id 14145
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output HDMI-0 disconnected
(II) RADEON(0): Using user preference for initial modes
(II) RADEON(0): Output LVDS using initial mode 1280x800
(II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(**) RADEON(0): Display dimensions: (330, 210) mm
(**) RADEON(0): DPI set to (98, 154)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib64/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) RADEON(0): Will attempt to use R6xx/R7xx EXA support if DRI is enabled.
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib64/xorg/modules/libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 2.5.0
ABI class: X.Org Video Driver, version 6.0
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) RADEON(0): RADEONScreenInit c0000000 0 0
Output DIG0 transmitter setup success
Blank CRTC 0 success
Disable CRTC memreq 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC memreq 1 success
Disable CRTC 1 success
(II) RADEON(0): Dynamic Power Management Disabled
(==) RADEON(0): Using 24 bit depth buffer
mc fb loc is 00cf00c0
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0): mem_size : 0x10000000
(II) RADEON(0): MC_FB_LOCATION : 0x00cf00c0
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Allocating from a screen of 262080 kb
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00640000
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00644000
(II) RADEON(0): Will use 6400 kb for front buffer at offset 0x00000000
(II) RADEON(0): Will use 64 kb for PCI GART at offset 0x0fff0000
(II) RADEON(0): Will use 6400 kb for back buffer at offset 0x00648000
(II) RADEON(0): Will use 6400 kb for depth buffer at offset 0x00c88000
(II) RADEON(0): Will use 120832 kb for textures at offset 0x012c8000
(II) RADEON(0): Will use 122016 kb for X Server offscreen at offset 0x088c8000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.4
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xc0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [pci] 32768 kB allocated with handle 0x0544e900
(II) RADEON(0): [pci] ring handle = 0x2b800000
(II) RADEON(0): [pci] Ring mapped at 0x7f7f3e05c000
(II) RADEON(0): [pci] Ring contents 0x00000000
(II) RADEON(0): [pci] ring read ptr handle = 0x1b7ff000
(II) RADEON(0): [pci] Ring read ptr mapped at 0x7f7f3e16d000
(II) RADEON(0): [pci] Ring read ptr contents 0x00000000
(II) RADEON(0): [pci] vertex/indirect buffers handle = 0x2b801000
(II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0x7f7f29356000
(II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
(II) RADEON(0): [pci] GART texture map handle = 0x2b802000
(II) RADEON(0): [pci] GART Texture map mapped at 0x7f7f276d6000
(II) RADEON(0): [drm] register handle = 0x2fff9000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x00cf00c0 0x00cf00c0
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 16
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0x00cf00c0 is: 0x00cf00c0
(WW) RADEON(0): MC_AGP_LOCATION was: 0x003f0000 is: 0x00030000
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x00cf00c0 0x00cf00c0
(II) RADEON(0): MC_AGP_LOCATION : 0x00030000
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): Setting EXA maxPitchBytes
(II) EXA(0): Offscreen pixmap area of 124944384 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(II) UploadToScreen
(II) DownloadFromScreen
(II) RADEON(0): Acceleration enabled
(**) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Set up textured video
Output DIG0 transmitter setup success
Output CRT1 disable success
Output DIG0 transmitter setup success
Blank CRTC 0 success
Disable CRTC memreq 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC memreq 1 success
Disable CRTC 1 success
Output DIG0 transmitter setup success
Blank CRTC 0 success
Disable CRTC memreq 0 success
Disable CRTC 0 success
Set CRTC 0 Source success
Mode 1280x800 - 1408 816 10
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x00cf00c0 0x00cf00c0
(II) RADEON(0): MC_AGP_LOCATION : 0x00030000
Picked PLL 0
before 6894
after 6894
best_freq: 69088
best_feedback_div: 87
best_frac_feedback_div: 0
best_ref_div: 2
best_post_div: 17
(II) RADEON(0): crtc(0) Clock: mode 68940, PLL 690880
(II) RADEON(0): crtc(0) PLL : refdiv 2, fbdiv 0x57(87), fracfbdiv 0, pdiv 17
Set CRTC 0 PLL success
Set CRTC Timing success
Set CRTC 0 Overscan success
Not using RMX
scaler 0 setup success
Set CRTC 0 Source success
crtc 0 YUV disable setup success
Output DIG0 transmitter setup success
Output DIG1 encoder setup success
Output DIG1 encoder setup success
Output DIG0 transmitter setup success
Output DIG0 transmitter setup success
Output DIG0 transmitter setup success
Output DIG0 transmitter setup success
Enable CRTC 0 success
Enable CRTC memreq 0 success
Unblank CRTC 0 success
Output CRT1 disable success
Output DIG0 transmitter setup success
Blank CRTC 1 success
Disable CRTC memreq 1 success
Disable CRTC 1 success
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: Interface 1.4 failed, trying 1.1
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib64/dri/r600_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 338 x 211
(II) XKB: reuse xkmfile /usr/share/X11/xkb/compiled/server-8AA988DD479FAABEC4FC3CCCF4CC29B4948840B4.xkm
(II) config/hal: Adding input device Power Button
(II) LoadModule: "evdev"
(II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6.902, module version = 2.4.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "it"
(**) Option "xkb_options" "compose:rwin"
(II) XKB: reuse xkmfile /usr/share/X11/xkb/compiled/server-7E39AD50489ECF60598EAF4B89EFB97683399CB7.xkm
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "it"
(**) Option "xkb_options" "compose:rwin"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event5"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "it"
(**) Option "xkb_options" "compose:rwin"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "it"
(**) Option "xkb_options" "compose:rwin"
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) Synaptics touchpad driver version 1.2.2
(**) Option "Device" "/dev/input/event1"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5578
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4662
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
(II) SynPS/2 Synaptics TouchPad: buttons: left right
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) RADEON(0): EDID vendor "SEC", prod id 14145
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: SEC Model: 3741 Serial#: 0
(II) RADEON(0): Year: 2007 Week: 0
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.587 redY: 0.344 greenX: 0.320 greenY: 0.541
(II) RADEON(0): blueX: 0.155 blueY: 0.130 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1296 h_sync_end 1344 h_blank_end 1408 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
(II) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): SAMSUNG
(II) RADEON(0): 154AT07-T01
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff004ca3413700000000
(II) RADEON(0): 00110103802115780a42d59658528a27
(II) RADEON(0): 21505400000001010101010101010101
(II) RADEON(0): 010101010101ee1a0080502010301030
(II) RADEON(0): 13004bcf100000190000000f00000000
(II) RADEON(0): 00000000002387026400000000fe0053
(II) RADEON(0): 414d53554e470a2020202020000000fe
(II) RADEON(0): 00313534415430372d5430310a200022
(II) RADEON(0): EDID vendor "SEC", prod id 14145
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
(II) config/hal: Adding input device Chicony USB 2.0 Camera
(**) Chicony USB 2.0 Camera: always reports core events
(**) Chicony USB 2.0 Camera: Device: "/dev/input/event6"
(II) Chicony USB 2.0 Camera: Found keys
(II) Chicony USB 2.0 Camera: Configuring as keyboard
(II) XINPUT: Adding extended input device "Chicony USB 2.0 Camera" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "it"
(**) Option "xkb_options" "compose:rwin"
(II) RADEON(0): EDID vendor "SEC", prod id 14145
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: SEC Model: 3741 Serial#: 0
(II) RADEON(0): Year: 2007 Week: 0
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.587 redY: 0.344 greenX: 0.320 greenY: 0.541
(II) RADEON(0): blueX: 0.155 blueY: 0.130 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1296 h_sync_end 1344 h_blank_end 1408 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
(II) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): SAMSUNG
(II) RADEON(0): 154AT07-T01
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff004ca3413700000000
(II) RADEON(0): 00110103802115780a42d59658528a27
(II) RADEON(0): 21505400000001010101010101010101
(II) RADEON(0): 010101010101ee1a0080502010301030
(II) RADEON(0): 13004bcf100000190000000f00000000
(II) RADEON(0): 00000000002387026400000000fe0053
(II) RADEON(0): 414d53554e470a2020202020000000fe
(II) RADEON(0): 00313534415430372d5430310a200022
(II) RADEON(0): EDID vendor "SEC", prod id 14145
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0

User avatar
GvMariani
Collaboratore
Collaboratore
Posts: 610
Joined: 27 July 2009, 11:31
ROSA: 2016.1 Fresh R10
OpenMandriva: -
Kernel: 4.19.13-nrj-desktop
Desktop: Plasma 5
country: Italy
Location: Cologno Monzese (MI) - Italia

Re: Problemi con KMS e Kernel 2.6.38.2

Post by GvMariani »

Premesso che sarebbe molto più interessante vedere l'Xorg.log le altre cose qui sotto indicate con il KMS abilitato (istruzioni dettagliate più in basso:(*)), da quanto hai allegato qui si deduce solo:
1) che stai usando il driver dri r600c probabilmente per un portatile (roba rognosa, di solito...), da questa riga:
(--) PCI:*(0:1:0:0) 1002:95c4:1179:ff1e ATI Technologies Inc Mobility Radeon HD 3400 Series rev 0, Mem @ 0xc0000000/268435456, 0xd6300000/65536, I/O @ 0x00005000/256, BIOS @ 0x????????/131072
2) che hai installato l'ultimo driver ati per xorg, da quest'altra:
(II) Module radeon: vendor="X.Org Foundation" compiled for 1.7.7, module version = 6.14.1
Ora, per immaginare qualche rispostasarebbe utile saperne di più sul tuo sistema e, più precisamente (ripeto, con il KMS abilitato...):
1) com'è il tuo xorg.conf (lo trovi in /etc/X11);

2) quali versioni di lib64drm e di mesa hai installato:

Code: Select all

rpm -qa | grep drm
e

Code: Select all

rpm -qa | grep mesa
che ti dicono?

3) cosa dice il file di log di sistema: dai da console il comando

Code: Select all

dmseg | grep drm 
e magari salva su un file il risultato

Code: Select all

 dmseg | grep drm > /dir/che/vuoi/filechetipare.log
4) cosa dice adesso l'Xorg.0.log.

(*) Per ottenere tutto ciò, supponendo che tu abbia il boot SO configurato come nell'installazione, devi prima metterlo in modo che parta in modalità testuale e non subito grafica: MCC > Hardware > Setup the graphical server > options e togli la spunta alla casella "Automatically start the graphical interface (Xorg) upon booting", poi salva e riavvia. Dopo esserti loggato con i tuoi username & password nella console testuale:
* prima recuperi i dati di syslog (con il comando "dmesg": v. sopra)
* poi fai partire la grafica, con il comando "startx".
Se ti va bene, abbiamo già un dato in più. Se invece si pianta come al solito, riavvii e, dopo un nuovo logon testuale, provvedi a salvare il file Xorg.0.log. Dopodiché ripristini la partenza in modalità grafica (come sopra, solo rimettendo la spunta alla casella sopra indicata) e ritogli il "radeon.modeset=1" dalla riga di comando del boot, in modo da recuperare l'uso normale del Pc intanto che cerchiamo di capirci qualcosa...

GvM

PS. Puoi sempre provare a vedere se con altri kernel (stessa versione non MIB, versioni precedenti MIB o non MIB...) il problema scompare...

User avatar
GiuX
Utente
Utente
Posts: 238
Joined: 6 May 2009, 10:21
ROSA: Fresh
OpenMandriva: -
Kernel: 3.6.11nrjQL
Desktop: KDE 4.9.5
country: Italia

Re: Problemi con KMS e Kernel 2.6.38.2

Post by GiuX »

I dati che mi richiedevi sono questi:

# rpm -qa | grep drm
lib64drm_nouveau1-2.4.24-69.2mib2010.2
lib64drm_radeon1-2.4.24-69.2mib2010.2
libdrm-common-2.4.24-69.2mib2010.2
lib64drm_intel1-2.4.24-69.2mib2010.2
lib64drm2-2.4.24-69.2mib2010.2

# rpm -qa | grep mesa
mesa-7.10.1-69.1mib2010.2
lib64mesagl1-7.10.1-69.1mib2010.2
mesa-demos-8.0.1-4mib2010.1
lib64mesaglu1-7.10.1-69.1mib2010.2
lib64mesaglut3-7.10.1-69.1mib2010.2

Il mio file Xorg.conf è invece questo (ci sono un po' di opzioni in più, ma di base e quello generato da XFdrake)

# File generated by XFdrake (rev )

# **********************************************************************
# Refer to the xorg.conf man page for details about the format of
# this file.
# **********************************************************************

Section "ServerFlags"
Option "DontZap" "False" # disable <Ctrl><Alt><BS> (server abort)
AllowMouseOpenFail # allows the server to start up even if the mouse does not work
#DontZoom # disable <Ctrl><Alt><KP_+>/<KP_-> (resolution switching)
EndSection

Section "Module"
Load "v4l" # Video for Linux
EndSection

Section "Monitor"
Identifier "monitor1"
VendorName "Generic"
ModelName "Flat Panel 1280x800"
HorizSync 31.5-50.0
VertRefresh 56.0-65.0

# Monitor preferred modeline (60.0 Hz vsync, 49.0 kHz hsync, ratio 16/10, 98 dpi)
ModeLine "1280x800" 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync

# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630

# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616

# modeline generated by gtf(1) [handled by XFdrake]
ModeLine "1280x800_120" 181.21 1280 1376 1520 1760 800 801 804 858 -HSync +Vsync

# modeline generated by gtf(1) [handled by XFdrake]
ModeLine "1280x800_100" 147.89 1280 1376 1512 1744 800 801 804 848 -HSync +Vsync

# modeline generated by gtf(1) [handled by XFdrake]
ModeLine "1280x800_85" 123.38 1280 1368 1504 1728 800 801 804 840 -HSync +Vsync

# modeline generated by gtf(1) [handled by XFdrake]
ModeLine "1280x800_75" 107.21 1280 1360 1496 1712 800 801 804 835 -HSync +Vsync

# modeline generated by gtf(1) [handled by XFdrake]
ModeLine "1280x800_60" 83.46 1280 1344 1480 1680 800 801 804 828 -HSync +Vsync

# modeline generated by gtf(1) [handled by XFdrake]
ModeLine "1280x800_50" 68.56 1280 1336 1472 1664 800 801 804 824 -HSync +Vsync
EndSection

Section "Device"
Identifier "device1"
VendorName "ATI Technologies Inc"
BoardName "ATI Radeon HD 2000 and later (radeon/fglrx)"
Driver "radeon"
Option "DPMS"
Option "AGPMode" "4"
Option "AccelMethod" "EXA"
Option "ColorTiling" "on"
Option "RenderAccel" "on"
Option "AccelDFS" "on"
Option "EnablePageFlip" "on"
Option "AGPFastWrite" "yes"
Option "EXAVSync" "yes"
EndSection

Section "Screen"
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultColorDepth 24

Subsection "Display"
Depth 8
Modes "1280x800"
EndSubsection

Subsection "Display"
Depth 15
Modes "1280x800"
EndSubsection

Subsection "Display"
Depth 16
Modes "1280x800"
EndSubsection

Subsection "Display"
Depth 24
Modes "1280x800"
EndSubsection
EndSection

Section "ServerLayout"
Identifier "layout1"
Screen "screen1"
EndSection

comunque, ho già provato a partire in mod. testuale con KMS abilitato, ma mi si pianta sempre sullo stesso punto... faccio un'ulteriore prova e ti posto il file Xorg.0.log che esce...

Xorg.0.conf con KMS abilitato:


X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux_2.6.22.12-server-1mdv Mandriva
Current Operating System: Linux localhost 2.6.38.2-desktop-nrj.69mib #1 SMP PREEMPT Tue Mar 29 16:40:11 CEST 2011 x86_64
Kernel command line: BOOT_IMAGE=linux root=UUID=304986f2-ab92-4627-a271-25ee3cb45b0d apic lapic resume=UUID=1ed7a621-c876-47bc-9a53-6f1bd9c52cb6 splash=silent vga=788
Build Date: 04 May 2010 09:54:43PM

Current version of pixman: 0.21.2
Before reporting problems, check http://qa.mandriva.com
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 28 12:42:05 2011
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "layout1"
(**) |-->Screen "screen1" (0)
(**) | |-->Monitor "monitor1"
(**) | |-->Device "device1"
(**) Option "DontZap" "False"
(**) Option "AllowMouseOpenFail"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
catalogue:/etc/X11/fontpath.d
(==) ModulePath set to "/usr/lib64/xorg/extra-modules,/usr/lib64/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AutoAddDevices.
(II) Loader magic: 0x7c7880
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 8

(--) PCI:*(0:1:0:0) 1002:95c4:1179:ff1e ATI Technologies Inc Mobility Radeon HD 3400 Series rev 0, Mem @ 0xc0000000/268435456, 0xd6300000/65536, I/O @ 0x00005000/256, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded by default.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "v4l"
(II) Loading /usr/lib64/xorg/modules/drivers/v4l_drv.so
(II) Module v4l: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 0.1.1
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "extmod"
(II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "radeon"
(II) Loading /usr/lib64/xorg/modules/drivers/radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 6.14.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) v4l driver for Video4Linux
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, ATI Radeon HD 4200, ATI Radeon 4100,
ATI Mobility Radeon HD 4200, ATI Mobility Radeon 4100,
ATI Radeon HD 4290, ATI Radeon HD 4250, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6250 Graphics, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5900 Series, ATI Radeon HD 5900 Series,
ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 5700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, AMD Radeon HD 6900 Series,
AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for v4l
(II) [KMS] drm report modesetting isn't supported.
(II) RADEON(0): TOTO SAYS 00000000d6300000
(II) RADEON(0): MMIO registers at 0x00000000d6300000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(**) RADEON(0): Option "AGPMode" "4"
(**) RADEON(0): Option "AGPFastWrite" "yes"
(**) RADEON(0): Option "EnablePageFlip" "on"
(**) RADEON(0): Option "AccelDFS" "on"
(**) RADEON(0): Option "ColorTiling" "on"
(**) RADEON(0): Option "RenderAccel" "on"
(**) RADEON(0): Option "AccelMethod" "EXA"
(**) RADEON(0): Option "EXAVSync" "yes"
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib64/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Mobility Radeon HD 3400 Series" (ChipID = 0x95c4)
(--) RADEON(0): Linear framebuffer at 0x00000000c0000000
(II) RADEON(0): PCIE card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib64/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): ATOM BIOS detected
(II) RADEON(0): ATOM BIOS Rom:
SubsystemVendorID: 0x1179 SubsystemID: 0xff1c
IOBaseAddress: 0x5000
Filename: 26716Q.bin
BIOS Bootup Message:
TOS_POTOMAC_DDR2 M82 GDDR2_16Mx16 64bit 128MB 680e/500m

(II) RADEON(0): Framebuffer space used by Firmware (kb): 16
(II) RADEON(0): Start of VRAM area used by Firmware: 0xfffc000
(II) RADEON(0): AtomBIOS requests 16kB of VRAM scratch space
(II) RADEON(0): AtomBIOS VRAM scratch base: 0xfffc000
(II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEON(0): Default Engine Clock: 680000
(II) RADEON(0): Default Memory Clock: 500000
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEON(0): Maximum Pixel Clock: 400000
(II) RADEON(0): Reference Clock: 27000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.33.0
(**) RADEON(0): Page Flipping disabled on r5xx and newer chips.

(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Detected total video RAM=262144K, accessible=262144K (PCI BAR=262144K)
(--) RADEON(0): Mapped VideoRAM: 262144 kByte (64 bit DDR SDRAM)
(II) RADEON(0): Color tiling disabled
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): PLL parameters: rf=2700 rd=12 min=90000 max=120000; xclk=40000
(WW) RADEON(0): LVDS Info:
XRes: 1280, YRes: 800, DotClock: 68940
HBlank: 128, HOverPlus: 16, HSyncWidth: 48
VBlank: 16, VOverPlus: 1, VSyncWidth: 3
(II) RADEON(0): Output LVDS using monitor section monitor1
(II) RADEON(0): I2C bus "LVDS" initialized.
(II) RADEON(0): Output VGA-0 has no monitor section
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output HDMI-0 has no monitor section
(II) RADEON(0): I2C bus "HDMI-0" initialized.
(II) RADEON(0): Port0:
XRANDR name: LVDS
Connector: LVDS
LCD1: INTERNAL_KLDSCP_LVTMA
DDC reg: 0x7f68
(II) RADEON(0): Port1:
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_KLDSCP_DAC1
DDC reg: 0x7e40
(II) RADEON(0): Port2:
XRANDR name: HDMI-0
Connector: HDMI-A
DFP1: INTERNAL_UNIPHY
DDC reg: 0x7e50
(II) RADEON(0): I2C device "LVDS:ddc2" registered at address 0xA0.
(II) RADEON(0): EDID vendor "SEC", prod id 14145
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: SEC Model: 3741 Serial#: 0
(II) RADEON(0): Year: 2007 Week: 0
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.587 redY: 0.344 greenX: 0.320 greenY: 0.541
(II) RADEON(0): blueX: 0.155 blueY: 0.130 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1296 h_sync_end 1344 h_blank_end 1408 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
(II) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): SAMSUNG
(II) RADEON(0): 154AT07-T01
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff004ca3413700000000
(II) RADEON(0): 00110103802115780a42d59658528a27
(II) RADEON(0): 21505400000001010101010101010101
(II) RADEON(0): 010101010101ee1a0080502010301030
(II) RADEON(0): 13004bcf100000190000000f00000000
(II) RADEON(0): 00000000002387026400000000fe0053
(II) RADEON(0): 414d53554e470a2020202020000000fe
(II) RADEON(0): 00313534415430372d5430310a200022
finished output detect: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
finished output detect: 1
(II) RADEON(0): I2C device "HDMI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
finished output detect: 2
finished all detect
(II) RADEON(0): EDID vendor "SEC", prod id 14145
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: SEC Model: 3741 Serial#: 0
(II) RADEON(0): Year: 2007 Week: 0
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.587 redY: 0.344 greenX: 0.320 greenY: 0.541
(II) RADEON(0): blueX: 0.155 blueY: 0.130 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1296 h_sync_end 1344 h_blank_end 1408 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
(II) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): SAMSUNG
(II) RADEON(0): 154AT07-T01
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff004ca3413700000000
(II) RADEON(0): 00110103802115780a42d59658528a27
(II) RADEON(0): 21505400000001010101010101010101
(II) RADEON(0): 010101010101ee1a0080502010301030
(II) RADEON(0): 13004bcf100000190000000f00000000
(II) RADEON(0): 00000000002387026400000000fe0053
(II) RADEON(0): 414d53554e470a2020202020000000fe
(II) RADEON(0): 00313534415430372d5430310a200022
(II) RADEON(0): EDID vendor "SEC", prod id 14145
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output HDMI-0 disconnected
(II) RADEON(0): Using user preference for initial modes
(II) RADEON(0): Output LVDS using initial mode 1280x800
(II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(**) RADEON(0): Display dimensions: (330, 210) mm
(**) RADEON(0): DPI set to (98, 154)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib64/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) RADEON(0): Will attempt to use R6xx/R7xx EXA support if DRI is enabled.
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib64/xorg/modules/libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 2.5.0
ABI class: X.Org Video Driver, version 6.0
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) RADEON(0): RADEONScreenInit c0000000 0 0
Output DIG0 transmitter setup success
Blank CRTC 0 success
Disable CRTC memreq 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC memreq 1 success
Disable CRTC 1 success
(II) RADEON(0): Dynamic Power Management Disabled
(==) RADEON(0): Using 24 bit depth buffer
mc fb loc is 00cf00c0
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0): mem_size : 0x10000000
(II) RADEON(0): MC_FB_LOCATION : 0x00cf00c0
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Allocating from a screen of 262080 kb
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00640000
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00644000
(II) RADEON(0): Will use 6400 kb for front buffer at offset 0x00000000
(II) RADEON(0): Will use 64 kb for PCI GART at offset 0x0fff0000
(II) RADEON(0): Will use 6400 kb for back buffer at offset 0x00648000
(II) RADEON(0): Will use 6400 kb for depth buffer at offset 0x00c88000
(II) RADEON(0): Will use 120832 kb for textures at offset 0x012c8000
(II) RADEON(0): Will use 122016 kb for X Server offscreen at offset 0x088c8000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.4
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xc0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [pci] 32768 kB allocated with handle 0x0564e900
(II) RADEON(0): [pci] ring handle = 0x2b800000
(II) RADEON(0): [pci] Ring mapped at 0x7f33544ce000
(II) RADEON(0): [pci] Ring contents 0x00000000
(II) RADEON(0): [pci] ring read ptr handle = 0x1b7ff000
(II) RADEON(0): [pci] Ring read ptr mapped at 0x7f33691e6000
(II) RADEON(0): [pci] Ring read ptr contents 0x00000000
(II) RADEON(0): [pci] vertex/indirect buffers handle = 0x2b801000
(II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0x7f33542ce000
(II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
(II) RADEON(0): [pci] GART texture map handle = 0x2b802000
(II) RADEON(0): [pci] GART Texture map mapped at 0x7f335264e000
(II) RADEON(0): [drm] register handle = 0x2fff9000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x00cf00c0 0x00cf00c0
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 16
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0x00cf00c0 is: 0x00cf00c0
(WW) RADEON(0): MC_AGP_LOCATION was: 0x003f0000 is: 0x00030000
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x00cf00c0 0x00cf00c0
(II) RADEON(0): MC_AGP_LOCATION : 0x00030000
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): Setting EXA maxPitchBytes
(II) RADEON(0): EXA VSync enabled
(II) EXA(0): Offscreen pixmap area of 124944384 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(II) UploadToScreen
(II) DownloadFromScreen
(II) RADEON(0): Acceleration enabled
(**) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Set up textured video
Output DIG0 transmitter setup success
Output CRT1 disable success
Output DIG0 transmitter setup success
Blank CRTC 0 success
Disable CRTC memreq 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC memreq 1 success
Disable CRTC 1 success
Output DIG0 transmitter setup success
Blank CRTC 0 success
Disable CRTC memreq 0 success
Disable CRTC 0 success
Set CRTC 0 Source success
Mode 1280x800 - 1408 816 10
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x00cf00c0 0x00cf00c0
(II) RADEON(0): MC_AGP_LOCATION : 0x00030000
Picked PLL 0
before 6894
after 6894
best_freq: 69088
best_feedback_div: 87
best_frac_feedback_div: 0
best_ref_div: 2
best_post_div: 17
(II) RADEON(0): crtc(0) Clock: mode 68940, PLL 690880
(II) RADEON(0): crtc(0) PLL : refdiv 2, fbdiv 0x57(87), fracfbdiv 0, pdiv 17
Set CRTC 0 PLL success
Set CRTC Timing success
Set CRTC 0 Overscan success
Not using RMX
scaler 0 setup success
Set CRTC 0 Source success
crtc 0 YUV disable setup success
Output DIG0 transmitter setup success
Output DIG1 encoder setup success
Output DIG1 encoder setup success
Output DIG0 transmitter setup success
Output DIG0 transmitter setup success
Output DIG0 transmitter setup success
Output DIG0 transmitter setup success
Enable CRTC 0 success
Enable CRTC memreq 0 success
Unblank CRTC 0 success
Output CRT1 disable success
Output DIG0 transmitter setup success
Blank CRTC 1 success
Disable CRTC memreq 1 success
Disable CRTC 1 success
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: Interface 1.4 failed, trying 1.1
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib64/dri/r600_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 338 x 211
(II) XKB: reuse xkmfile /usr/share/X11/xkb/compiled/server-8AA988DD479FAABEC4FC3CCCF4CC29B4948840B4.xkm
(II) config/hal: Adding input device Chicony USB 2.0 Camera
(II) LoadModule: "evdev"
(II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6.902, module version = 2.4.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Chicony USB 2.0 Camera: always reports core events
(**) Chicony USB 2.0 Camera: Device: "/dev/input/event7"
(II) Chicony USB 2.0 Camera: Found keys
(II) Chicony USB 2.0 Camera: Configuring as keyboard
(II) XINPUT: Adding extended input device "Chicony USB 2.0 Camera" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "it"
(**) Option "xkb_options" "compose:rwin"
(II) XKB: reuse xkmfile /usr/share/X11/xkb/compiled/server-7E39AD50489ECF60598EAF4B89EFB97683399CB7.xkm
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "it"
(**) Option "xkb_options" "compose:rwin"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event6"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "it"
(**) Option "xkb_options" "compose:rwin"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "it"
(**) Option "xkb_options" "compose:rwin"
(II) config/hal: Adding input device HID 18b4:1001
(**) HID 18b4:1001: always reports core events
(**) HID 18b4:1001: Device: "/dev/input/event2"
(II) HID 18b4:1001: Found keys
(II) HID 18b4:1001: Configuring as keyboard
(II) XINPUT: Adding extended input device "HID 18b4:1001" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "it"
(**) Option "xkb_options" "compose:rwin"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event5"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "it"
(**) Option "xkb_options" "compose:rwin"
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) Synaptics touchpad driver version 1.2.2
(**) Option "Device" "/dev/input/event1"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5578
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4662
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
(II) SynPS/2 Synaptics TouchPad: buttons: left right
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) RADEON(0): EDID vendor "SEC", prod id 14145
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: SEC Model: 3741 Serial#: 0
(II) RADEON(0): Year: 2007 Week: 0
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.587 redY: 0.344 greenX: 0.320 greenY: 0.541
(II) RADEON(0): blueX: 0.155 blueY: 0.130 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1296 h_sync_end 1344 h_blank_end 1408 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
(II) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): SAMSUNG
(II) RADEON(0): 154AT07-T01
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff004ca3413700000000
(II) RADEON(0): 00110103802115780a42d59658528a27
(II) RADEON(0): 21505400000001010101010101010101
(II) RADEON(0): 010101010101ee1a0080502010301030
(II) RADEON(0): 13004bcf100000190000000f00000000
(II) RADEON(0): 00000000002387026400000000fe0053
(II) RADEON(0): 414d53554e470a2020202020000000fe
(II) RADEON(0): 00313534415430372d5430310a200022
(II) RADEON(0): EDID vendor "SEC", prod id 14145
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
(II) RADEON(0): EDID vendor "SEC", prod id 14145
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: SEC Model: 3741 Serial#: 0
(II) RADEON(0): Year: 2007 Week: 0
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.587 redY: 0.344 greenX: 0.320 greenY: 0.541
(II) RADEON(0): blueX: 0.155 blueY: 0.130 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1296 h_sync_end 1344 h_blank_end 1408 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
(II) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): SAMSUNG
(II) RADEON(0): 154AT07-T01
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff004ca3413700000000
(II) RADEON(0): 00110103802115780a42d59658528a27
(II) RADEON(0): 21505400000001010101010101010101
(II) RADEON(0): 010101010101ee1a0080502010301030
(II) RADEON(0): 13004bcf100000190000000f00000000
(II) RADEON(0): 00000000002387026400000000fe0053
(II) RADEON(0): 414d53554e470a2020202020000000fe
(II) RADEON(0): 00313534415430372d5430310a200022
(II) RADEON(0): EDID vendor "SEC", prod id 14145
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
(II) Chicony USB 2.0 Camera: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) Video Bus: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) HID 18b4:1001: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) UnloadModule: "synaptics"
Output DIG0 transmitter setup success
Blank CRTC 0 success
Disable CRTC memreq 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC memreq 1 success
Disable CRTC 1 success
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x00cf00c0 0x00cf00c0
(II) RADEON(0): MC_AGP_LOCATION : 0x00000000
(II) RADEON(0): avivo_restore !
Enable CRTC 0 success
Enable CRTC memreq 0 success
Unblank CRTC 0 success
(II) RADEON(0): [drm] removed 1 reserved context for kernel
(II) RADEON(0): [drm] unmapping 8192 bytes of SAREA 0x2b7ff000 at 0x7f33691c6000
(II) RADEON(0): [drm] Closed DRM master.

User avatar
GvMariani
Collaboratore
Collaboratore
Posts: 610
Joined: 27 July 2009, 11:31
ROSA: 2016.1 Fresh R10
OpenMandriva: -
Kernel: 4.19.13-nrj-desktop
Desktop: Plasma 5
country: Italy
Location: Cologno Monzese (MI) - Italia

Re: Problemi con KMS e Kernel 2.6.38.2

Post by GvMariani »

Aargh!!!
Fermo lì. E questo che cos'è?
Option "AGPMode" "4"
...
Option "AGPFastWrite" "yes"
Hai una scheda video AGP?
Non mi sembrava, leggendo l'Xorg.log che hai postato...
Se invece ce l'hai, mi risulta che questa situazione può essere una bella rogna:
in rete si trovano i consigli più svariati, ma quelli che ritornano più spesso sono:
* disabilitare del tutto l'agp (aggiungere radeon.agpmode=-1 alla riga di comando del boot, oltre al radeon.modeset=1)
* provare una velocità inferiore per il bus AGP (aggiungere radeon.agpmode=1 o 2).

Anche se non credo sia l'xorg.conf la causa dei blocchi in partenza (perché lì è coinvolto il DRM del kernel e lui le sue opzioni le prende dal file modprobe.conf e/o dalla riga di comando...), mi sembra che sia un po' pasticciato: fa' menzione dei fglrx che evidentemente non sono installati, ci sono istruzioni per l'AGP ma mi pareva che l'Xorg.log parlasse di PCIe(xpress), ci sono opzioni che non è detto che siano utili / ancora supportate...
Il mio è molto più semplice nella sezione relativa al driver
Section "Device"
Identifier "device0"
VendorName "ATI Technologies Inc"
BoardName "ATI Radeon HD3850 (radeon)"
Driver "radeon"
Option "AccelMethod" "EXA"
# Option "XAANoOffscreenPixmaps" "true"
Option "RenderAccel" "on"
Option "AccelDFS" "on"
Option "BackingStore" "on"
Option "EnablePageFlip" "on"
Option "ColorTiling" "on"
# Option "SwapbuffersWait" "off"

# To enable power usage reduction when the system is idle (DPMS active)
# Option "DynamicPM" "off"
# Enables experimental TV-out support via ATOMBios for R/RV6xx, and R/RV7xx atombios chips
# Option "ATOMTvOut" "off"
# Specify the default TV standard if you want to use something other than the bios default
# Option "TVStandard" "pal"
# Option "AddARGBGLXVisuals" "true"
# Option "AllowGLXWithComposite" "true"
# To enable power usage reduction at expense of 3D performance
# Option "ClockGating" "off"
Option "monitor-DVI-1" "monitor1"
Option "monitor-DVI-0" "monitor0"
EndSection
Per il resto: libdrm, mesa e xorg-ati sono quasi tutti aggiornati (ci sono in giro le libdrm 2.4.25 e mesa 7.10.2... ma non credo faranno differenza), come pure il kernel...
bisogna raccogliere più informazioni.
comunque, ho già provato a partire in mod. testuale con KMS abilitato, ma mi si pianta sempre sullo stesso punto...
Questo non l'avevo registrato...
a questo punto di dmesg non se ne parla, perché al nuovo reboot viene sovrascritto... (e ovviamente non c'è Xorg.log perché in ambiente grafico non ci sei ancora entrato)
Però potresti provare guardare dentro il /var/log/messages e cercare lì le righe che iniziano con "[drm]": non dovrebbe essere difficile individuare il punto in cui inizia il log del nuovo riavvio e, poco lì sopra, ci dovrebbero essere gli eventuali indizi di errore da parte del driver video perché se si è solo bloccato il video e la tastiera, il resto del sistema andava ancora e il demone del syslog continuava a registrare tutti i messaggi dei boot fallito.

Il sito di Fedora, inoltre, suggerisce di abilitare i messaggi di debug del DRM, aggiungendo "drm.debug=14" e "log_buf_len=16M" alla riga di comando del boot: ti dovrebbe riempire per benino il syslog e il dmesg di informazioni sull'inizializzazione del KMS.

GvM

PS. Potresti anche prendere in considerazione l'idea di aprire una segnalazione di bug sul sito relativo... almeno potresti interagire direttamente con gli sviluppatori interessati.

User avatar
GiuX
Utente
Utente
Posts: 238
Joined: 6 May 2009, 10:21
ROSA: Fresh
OpenMandriva: -
Kernel: 3.6.11nrjQL
Desktop: KDE 4.9.5
country: Italia

Re: Problemi con KMS e Kernel 2.6.38.2

Post by GiuX »

leggendo il file Xorg.0.log relativo a quando lo faccio partire col KMS, mi sono accorto che restituisce uno strano

(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.33.0
(**) RADEON(0): Page Flipping disabled on r5xx and newer chips.

e

(II) AIGLX: Screen 0 is not DRI2 capable

!!!!

User avatar
GiuX
Utente
Utente
Posts: 238
Joined: 6 May 2009, 10:21
ROSA: Fresh
OpenMandriva: -
Kernel: 3.6.11nrjQL
Desktop: KDE 4.9.5
country: Italia

Re: Problemi con KMS e Kernel 2.6.38.2

Post by GiuX »

dove posso fare la segnalazione???

User avatar
GvMariani
Collaboratore
Collaboratore
Posts: 610
Joined: 27 July 2009, 11:31
ROSA: 2016.1 Fresh R10
OpenMandriva: -
Kernel: 4.19.13-nrj-desktop
Desktop: Plasma 5
country: Italy
Location: Cologno Monzese (MI) - Italia

Re: Problemi con KMS e Kernel 2.6.38.2

Post by GvMariani »

GiuX wrote:leggendo il file Xorg.0.log relativo a quando lo faccio partire col KMS, mi sono accorto che restituisce uno strano
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.33.0
(**) RADEON(0): Page Flipping disabled on r5xx and newer chips.
e
(II) AIGLX: Screen 0 is not DRI2 capable!!!!
Scusa: "rpm -qa | grep lib64dri" che cosa ti da?
Ho come l'impressione che hai installato solo un pezzo delle librerie di mesa più recenti:
per forza che poi si incaxxa...
Mi sa che ti mancano le lib64dri-drivers aggiornate: fanno parte di mesa anche quelle e forniscono (guarda caso) proprio quella "DRI library" la cui versione non sembra in linea con quella del DRM del kernel; altro indizio: già con mesa = 7.10.0 (oltre al kernel > 2.6.37 e le librdrm > = 2.4.24) quell'errore circa il pageflipping doveva essere sparito per il r600 & xorg-ati 6.14... se ce l'hai ancora nel log, pur avendo aggiornato tutto il resto (come è per te), è segno quasi sicuro che ti manca lo strato DRI di software.
Verifica ed eventualmente installa le lib64dri-drivers con lo stesso numero di versione delle altre librerie di mesa (7.10.1, nel tuo caso).
dove posso fare la segnalazione???
https://bugs.freedesktop.org/
ma aspetta a farlo... forse abbiamo trovato il problema (v. sopra).

Comunque, per la questione scheda video AGP (che mi sembra l'altro possibile candidato come causa):
"lspci -vv", dato da utente root, che ti dice a proposito del "VGA Compatilbe Controller"?

GvM

User avatar
GiuX
Utente
Utente
Posts: 238
Joined: 6 May 2009, 10:21
ROSA: Fresh
OpenMandriva: -
Kernel: 3.6.11nrjQL
Desktop: KDE 4.9.5
country: Italia

Re: Problemi con KMS e Kernel 2.6.38.2

Post by GiuX »

rpm -qa | grep lib64dri
lib64-drivers-7.10.1-69.1mib2010.2

le installai quando me le consigliasti per l'altro post, quello per il kernel 2.6.36.4

lspci -vv
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
Subsystem: Toshiba America Info Systems Device ff1e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0a <?>

00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: d6300000-d63fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [88] Subsystem: Toshiba America Info Systems Device ff1e
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 4149
Capabilities: [a0] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise-
Slot #1, PowerLimit 75.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [140 v1] Root Complex Link
Desc: PortNumber=02 ComponentID=01 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=01 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed19000
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Device ff1e
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 60e0
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Device ff1e
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 60c0
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) (prog-if 20 [EHCI])
Subsystem: Toshiba America Info Systems Device ff1e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 0: Memory at d6405c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd

00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
Subsystem: Toshiba America Info Systems Device ff1e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at d6400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0200c Data: 41a1
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=7f
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=80
Status: NegoPending- InProgress-
Capabilities: [130 v1] Root Complex Link
Desc: PortNumber=0f ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00004fff
Memory behind bridge: d5300000-d62fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d10fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #0, PowerLimit 6.500W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 4151
Capabilities: [90] Subsystem: Toshiba America Info Systems Device ff1e
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=01 ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d4200000-d52fffff
Prefetchable memory behind bridge: 00000000d1100000-00000000d20fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #1, PowerLimit 6.500W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 4159
Capabilities: [90] Subsystem: Toshiba America Info Systems Device ff1e
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=02 ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=06, subordinate=07, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: d3200000-d41fffff
Prefetchable memory behind bridge: 00000000d2100000-00000000d30fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #5, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #4, PowerLimit 6.500W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn+ PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 4161
Capabilities: [90] Subsystem: Toshiba America Info Systems Device ff1e
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=05 ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Device ff1e
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 60a0
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Device ff1e
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 6080
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Device ff1e
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at 6060
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Device ff1e
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 6040
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) (prog-if 20 [EHCI])
Subsystem: Toshiba America Info Systems Device ff1e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at d6405800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
Memory behind bridge: d3100000-d31fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: Toshiba America Info Systems Device ff1e

00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
Subsystem: Toshiba America Info Systems Device ff1e
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel modules: iTCO_wdt

00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Toshiba America Info Systems Device ff1e
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 44
Region 0: I/O ports at 6108
Region 1: I/O ports at 6114
Region 2: I/O ports at 6100
Region 3: I/O ports at 6110
Region 4: I/O ports at 6020 [size=32]
Region 5: Memory at d6405000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable+ Count=1/16 Maskable- 64bit-
Address: fee0100c Data: 4189
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
Capabilities: [b0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ahci
Kernel modules: ahci

00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
Subsystem: Toshiba America Info Systems Device ff1e
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at d6406000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 6000 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801

01:00.0 VGA compatible controller: ATI Technologies Inc Mobility Radeon HD 3400 Series (prog-if 00 [VGA controller])
Subsystem: Toshiba America Info Systems Device ff1e
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at 5000 [size=256]
Region 2: Memory at d6300000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at d6320000 [disabled] [size=128K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>

01:00.1 Audio device: ATI Technologies Inc RV620 Audio device [Radeon HD 34xx Series]
Subsystem: Toshiba America Info Systems Device ff1e
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 47
Region 0: Memory at d6310000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0100c Data: 41a9
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
Subsystem: Toshiba America Info Systems Device ff1e
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: I/O ports at 3000 [size=256]
Region 2: Memory at d0010000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at d0000000 (64-bit, prefetchable) [size=64K]
Capabilities: [40] Power Management version 7
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0300c Data: 4191
Capabilities: [70] Express (v2) Endpoint, MSI 01
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [ac] MSI-X: Enable- Count=2 Masked-
Vector table: BAR=4 offset=00000000
PBA: BAR=4 offset=00000800
Capabilities: [cc] Vital Product Data
Unknown small resource type 00, will not decode more.
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 08-00-00-00-ff-ff-00-00
Kernel driver in use: r8169
Kernel modules: r8169

03:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01)
Subsystem: Askey Computer Corp. Device 7141
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at d4200000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [60] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <512ns, L1 <64us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [90] MSI-X: Enable- Count=1 Masked-
Vector table: BAR=0 offset=00000000
PBA: BAR=0 offset=00000000
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 00-00-00-00-00-00-00-00
Kernel driver in use: ath9k
Kernel modules: ath9k

04:06.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) (prog-if 10 [OHCI])
Subsystem: Toshiba America Info Systems Device ff1e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max)
Interrupt: pin B routed to IRQ 17
Region 0: Memory at d3100000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME+
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci

04:06.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
Subsystem: Toshiba America Info Systems Device ff1e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at d3100b00 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
Kernel driver in use: sdhci-pci
Kernel modules: sdhci-pci

04:06.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
Subsystem: Toshiba America Info Systems Device ff1e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 11
Region 0: Memory at d3100900 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-

04:06.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
Subsystem: Toshiba America Info Systems Device ff1e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin B routed to IRQ 17
Region 0: Memory at d3100800 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
Kernel driver in use: r852
Kernel modules: r852

User avatar
GvMariani
Collaboratore
Collaboratore
Posts: 610
Joined: 27 July 2009, 11:31
ROSA: 2016.1 Fresh R10
OpenMandriva: -
Kernel: 4.19.13-nrj-desktop
Desktop: Plasma 5
country: Italy
Location: Cologno Monzese (MI) - Italia

Re: Problemi con KMS e Kernel 2.6.38.2

Post by GvMariani »

Se le dri giuste ci sono e la scheda non sembra una AGP (ma non sono un esperto di lettura dell'output di lspci...),
allora nessuna delle ipotesi che ho formulato quadrano con i dati del problema... :?:

A questo punto non resta che provare ad attivare le informazioni di debug, come suggerito dal sito di Fedora:
aggiungere "drm.debug=14" e "log_buf_len=16M" alla riga di comando del boot, poi rirprovare ad abilitare il modeset ed andare a vedere cosa c'è scritto nel /var/log/messages;
e vedere se da lì salta fuori qualcosa...

A proposito di /var/log/messages, cosa c'era scritto in quel file in corrispondenza al messaggio "(II) AIGLX: Screen 0 is not DRI2 capable" in Xorg.log, che è quasi sicuramente un sintomo del problema (se non funziona il DRI2, non va di sicuro neanche Xorg con il KMS attivato)?

Se non altro, avrai messo assieme tutti i dati possibili per la compilazione del bug report...

GvM

User avatar
NicCo
Amministratore
Amministratore
Posts: 4765
Joined: 6 December 2007, 19:54

Re: Problemi con KMS e Kernel 2.6.38.2

Post by NicCo »

Per GiuX
e per tutti gli utenti

Il Cross Posting non è consentito, neanche su MIB:
hai aperto lo stesso problema su almeno altri due diversi forum (forum1, forum2) in totale lo stesso argomento su almeno tre forum differenti, sempre che non ce ne siano anche altri...

Non ti sembra davvero un pò troppo?

Decidi su quale forum pensi di discutere i tuoi problemi e prosegui su quello,
la prossima volta che scopro un CrossPosting, sarà chiuso automaticamente!

Ciao, NicCo
.
--- Professional experience ---
Kernel designer, engineer, maintainer and tester for ROSA Desktop and OpenMandriva Lx O.S.

--- currently I'm playing with ---
LTS Kernels > Linux 4.1.12-nrjQL <<< Linux 3.18.17-nrjQL <<< Linux 3.14.46-nrjQL
EOL Kernels > Linux 3.19.8-nrjQL <<< Linux 3.17.8-nrjQL <<< Linux 3.15.10-nrjQL

User avatar
GiuX
Utente
Utente
Posts: 238
Joined: 6 May 2009, 10:21
ROSA: Fresh
OpenMandriva: -
Kernel: 3.6.11nrjQL
Desktop: KDE 4.9.5
country: Italia

Re: Problemi con KMS e Kernel 2.6.38.2

Post by GiuX »

Ti posto quello che è uscito nel /var/log/messages:

Apr 29 17:26:01 localhost kernel: [drm] Module unloaded
Apr 29 17:26:18 localhost kernel: [drm] Initialized drm 1.1.0 20060810
Apr 29 17:26:18 localhost kernel: [drm] radeon kernel modesetting enabled.
Apr 29 17:26:18 localhost kernel: fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
Apr 29 17:26:18 localhost kernel: Console: switching to colour dummy device 80x25
Apr 29 17:26:18 localhost kernel: [drm] initializing kernel modesetting (RV620 0x1002:0x95C4).
Apr 29 17:26:18 localhost kernel: [drm] register mmio base: 0xD6300000
Apr 29 17:26:18 localhost kernel: [drm] register mmio size: 65536
Apr 29 17:26:18 localhost kernel: ATOM BIOS: TOS_POTOMAC_DDR2
Apr 29 17:26:18 localhost kernel: radeon 0000:01:00.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used)
Apr 29 17:26:18 localhost kernel: radeon 0000:01:00.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
Apr 29 17:26:18 localhost kernel: [drm] Detected VRAM RAM=256M, BAR=256M
Apr 29 17:26:18 localhost kernel: [drm] RAM width 64bits DDR
Apr 29 17:26:18 localhost kernel: [TTM] Zone kernel: Available graphics memory: 2021598 kiB.
Apr 29 17:26:18 localhost kernel: [TTM] Initializing pool allocator.
Apr 29 17:26:18 localhost kernel: [drm] radeon: 256M of VRAM memory ready
Apr 29 17:26:18 localhost kernel: [drm] radeon: 512M of GTT memory ready.
Apr 29 17:26:18 localhost kernel: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
Apr 29 17:26:18 localhost kernel: [drm] Driver supports precise vblank timestamp query.
Apr 29 17:26:18 localhost kernel: radeon 0000:01:00.0: radeon: using MSI.
Apr 29 17:26:18 localhost kernel: [drm] radeon: irq initialized.
Apr 29 17:26:18 localhost kernel: [drm] GART: num cpu pages 131072, num gpu pages 131072
Apr 29 17:26:18 localhost kernel: [drm] Loading RV620 Microcode
Apr 29 17:26:18 localhost kernel: radeon 0000:01:00.0: WB enabled
Apr 29 17:26:18 localhost kernel: [drm] ring test succeeded in 1 usecs
Apr 29 17:26:18 localhost kernel: [drm] radeon: ib pool ready.
Apr 29 17:26:18 localhost kernel: [drm] ib test succeeded in 0 usecs
Apr 29 17:26:18 localhost kernel: [drm] Enabling audio support
Apr 29 17:26:18 localhost kernel: HDMI hot plug event: Pin=3 Presence_Detect=0 ELD_Valid=0
Apr 29 17:26:32 localhost shutdown[3262]: shutting down for system halt

Questo log l'ho ottenuto dando i seguenti comandi da terminale, in quanto anche con più prove non riuscivo a trovare la parte di log relativa all'avvio in KMS O.O:

modprobe -r radeon drm
modprobe radeon modeset=1

anche facendo così mi scompare il terminale e lo schermo diventa nero...

User avatar
GvMariani
Collaboratore
Collaboratore
Posts: 610
Joined: 27 July 2009, 11:31
ROSA: 2016.1 Fresh R10
OpenMandriva: -
Kernel: 4.19.13-nrj-desktop
Desktop: Plasma 5
country: Italy
Location: Cologno Monzese (MI) - Italia

Re: Problemi con KMS e Kernel 2.6.38.2

Post by GvMariani »

GiuX wrote:modprobe -r radeon drm
modprobe radeon modeset=1
anche facendo così mi scompare il terminale e lo schermo diventa nero...
Sì, potrebbe funzionare anche così...
Mi sembra che il tuo log si fermi al momento di enumerare i connettori di output: nel mio caso, infatti, il log è fatto così:
[drm] Initialized drm 1.1.0 20060810
[drm] radeon kernel modesetting enabled.
...
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading RV670 Microcode
radeon 0000:01:00.0: WB enabled
[drm] ring test succeeded in 1 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] Enabling audio support
failed to evaluate ATIF got AE_BAD_PARAMETER
HDMI hot plug event: Pin=3 Presence_Detect=0 ELD_Valid=0
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DVI-I
[drm] HPD1
[drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm] Encoders:
[drm] DFP1: INTERNAL_KLDSCP_TMDS1
[drm] CRT2: INTERNAL_KLDSCP_DAC2
[drm] Connector 1:
[drm] DIN
[drm] Encoders:
[drm] TV1: INTERNAL_KLDSCP_DAC2
[drm] Connector 2:
[drm] DVI-I
[drm] HPD2
[drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] DFP2: INTERNAL_LVTM1
[drm] Internal thermal controller with fan control
[drm] radeon: power management initialized
[drm] fb mappable at 0xD0141000
[drm] vram apper at 0xD0000000
[drm] size 7299072
[drm] fb depth is 24
[drm] pitch is 6912
Console: switching to colour frame buffer device 210x65
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.8.0 20080528 for 0000:01:00.0 on minor 0
Come vedi, manca tutto quanto viene dopo il messaggio "enabling audio support"...

Proveresti gentilmente ad aggiungere alla riga di comando con cui ri-carichi il modulo radeon (e abilitando di volta in volta il KMS):
* prima "radeon.agpmode=-1", giusto per togliere di mezzo del tutto la possibilità "AGP over PCIe";
* poi "drm.debug=0x07"?
Come cambia il log del drm?

GvM

User avatar
GvMariani
Collaboratore
Collaboratore
Posts: 610
Joined: 27 July 2009, 11:31
ROSA: 2016.1 Fresh R10
OpenMandriva: -
Kernel: 4.19.13-nrj-desktop
Desktop: Plasma 5
country: Italy
Location: Cologno Monzese (MI) - Italia

Re: Problemi con KMS e Kernel 2.6.38.2

Post by GvMariani »

Ehi Giux...
hai visto questo?
https://bugs.freedesktop.org/show_bug.cgi?id=35502

Assomiglia un mucchio al tuo log...

GvM

User avatar
GvMariani
Collaboratore
Collaboratore
Posts: 610
Joined: 27 July 2009, 11:31
ROSA: 2016.1 Fresh R10
OpenMandriva: -
Kernel: 4.19.13-nrj-desktop
Desktop: Plasma 5
country: Italy
Location: Cologno Monzese (MI) - Italia

Re: Problemi con KMS e Kernel 2.6.38.2

Post by GvMariani »

GvMariani wrote:Ehi Giux...
hai visto questo?
https://bugs.freedesktop.org/show_bug.cgi?id=35502
Assomiglia un mucchio al tuo log...
E sembra essere risolto con un kernel >= 2.6.38.3...

GvM

User avatar
NicCo
Amministratore
Amministratore
Posts: 4765
Joined: 6 December 2007, 19:54

Re: Problemi con KMS e Kernel 2.6.38.2

Post by NicCo »

Spero di portare il kernel 2.6.38.5 per il week-end


Ciao, NicCo
.
--- Professional experience ---
Kernel designer, engineer, maintainer and tester for ROSA Desktop and OpenMandriva Lx O.S.

--- currently I'm playing with ---
LTS Kernels > Linux 4.1.12-nrjQL <<< Linux 3.18.17-nrjQL <<< Linux 3.14.46-nrjQL
EOL Kernels > Linux 3.19.8-nrjQL <<< Linux 3.17.8-nrjQL <<< Linux 3.15.10-nrjQL

Post Reply