Page 6 of 7
Re: Kernel 3.0.0 + -NRJ and -NRJ-PAE for 2010.1, 2010.2, 201
Posted: 2 August 2011, 16:06
by polka
Salve. Il 29 luglio ho chiesto come installare il Kernel 3.0 su un portatile Acer con 2010.2 32 bit.
NiCco ha gentimente risposto e seguendo i comandi suggeriti ho installato il Kernel 3.0 che funziona perfettamente.
Ora vorrei fare lo stesso sul fisso a 64 bit che però monta una scheda video inegrata AMD Radeon HD 3300
Quello che trovo su MCC - Hardware - Configura il sistema grafico è: ATI Radeon HD 2000 and later(radeon/fglrx)
E' possibile avere la stessa semplice guida per questo nuovo upgrade?
Mi sono letto più volte tutti i messaggi sul sito, ma non riesco a seguire tutti i passaggi.
Grazie.
Ciao
Re: Kernel 3.0.0 + -NRJ and -NRJ-PAE for 2010.1, 2010.2, 201
Posted: 2 August 2011, 17:43
by NicCo
Il
primo msg di questo Topic è stato modificato e semplificato, vai a vedere:
adesso contiene i comandi da eseguire per aggiornare tutto, kernel, firmwares, drivers
Per quanto riguarda ATI, sono presenti i driver 8.861 con patch per kernel 3.0, che io avevo testato a vista monitorandone l'installazione sulla finestra di terminale e di buildare sul kernel 3.0.0 buildano e sembrano inserire i file e far tutto correttamente, ma non ho potuto testarli praticamente perchè non ho scheda ATI.
È stato riportato da un utente Doom-X una schermata nera con la sua Ati, quindi non so se il problema è limitato al suo caso o è generale
Sono usciti i driver 8.872 che ufficialmente supportano il kernel 3.0.0 senza bisogno di patch, quindi forse sarebe meglio aspettare il porting di questa versione
Ciao, NicCo
Re: Kernel 3.0.0 + -NRJ and -NRJ-PAE for 2010.1, 2010.2, 201
Posted: 2 August 2011, 23:54
by andreas
Mah, Almeno nel mio caso hanno funzionato bene: mi è addirittura sparito un fastidioso flag che diceva Hardware incompatibile, anche se poi funzionava tutto a dovere..
Re: Kernel 3.0.0 + -NRJ and -NRJ-PAE for 2010.1, 2010.2, 201
Posted: 3 August 2011, 0:27
by tobal
Mdv 2011.0 32 bits very very very very bad
No X, only if i enter from grub with F3+Modos Seguros
If enter in this way, my touchpad not work right, too
Possible causes:
Plymouth
Bootsplash
Grub
I have executed this from official mdv kernel and no X too
Code: Select all
plymouth-set-default-theme --rebuild-initrd Mandriva-Free
Actually, i will must reinstall mdv 2011 again in my laptop.
Re: Kernel 3.0.0 + -NRJ and -NRJ-PAE 2010.2->remaster fail
Posted: 3 August 2011, 4:46
by braytac
braytac wrote:To make a live CD with kernel 3.0, this happens
until 2.6.38.8, it work fine
, only kernel was changed to 3.0.
Re: Kernel 3.0.0 + -NRJ and -NRJ-PAE for 2010.1, 2010.2, 201
Posted: 3 August 2011, 8:42
by NicCo
@braytac
I've already read your previous msg about livecd
but this is the kernel topic and not the livecd one
you must write in the livecd forum or home page
The problem is in livecd needing to be properly modified, patched and updated for kernel 3.0.0!
so your msg had and has not sense here, I can't help
i am not livecd programmer or maintainer, or involved!
To understand:
e.g: if with kernel 3.0.0 the program vmware 7.1.4 and/or vmplayer 3.1.4 don't work anymore
i can't do anything in the kernel, i only have to wait for vmware update supporting new kernel
a new version vmware 7.1.5 / vmplayer 3.1.5 is needed for kernel 3.0.0, but I can't change kernel 3.0.0 to adapt it to vmware stuff
you can search with google, and there are many people searching now the right patch for vmware 7.1.4 or for an official update:
they don't search or even think to modify the kernel, or saying to Linus Torvalds:
go and remove some new changes & features in 3.0.0 because I have problems with vmware
The same happens with xorg-server, proprietary video drivers, some external (dkms-xxx) wifi drivers:
for this reason i prepared some new and and the most recent nvidia & ati drivers, the older dont build with kernel 3.0.x
but I can't modify the kernel itself, to trasform it as full compatible with all old and incompatible proprietary drivers or programs (livecd)...
Hoping you have understood,
bye, NicCo
Re: Kernel 3.0.0 + -NRJ and -NRJ-PAE for 2010.1, 2010.2, 201
Posted: 3 August 2011, 11:44
by tobal
This is the bug i obtained when i installed kernel 3.0
Code: Select all
I: *** Including module: dash ***
I: *** Including module: i18n ***
I: *** Including module: rpmversion ***
I: *** Including module: network ***
W: Possible missing firmware "ctfw_cna.bin" for kernel module "bna.ko"
W: Possible missing firmware "bnx2x/bnx2x-e2-6.2.9.0.fw" for kernel module "bnx2x.ko"
W: Possible missing firmware "bnx2x/bnx2x-e1h-6.2.9.0.fw" for kernel module "bnx2x.ko"
W: Possible missing firmware "bnx2x/bnx2x-e1-6.2.9.0.fw" for kernel module "bnx2x.ko"
W: Possible missing firmware "atmel_at76c504a_2958.bin" for kernel module "atmel.ko"
W: Possible missing firmware "atmel_at76c504_2958.bin" for kernel module "atmel.ko"
W: Possible missing firmware "atmel_at76c504-wpa.bin" for kernel module "atmel.ko"
W: Possible missing firmware "iwmc3200wifi-lmac-sdio.bin" for kernel module "iwmc3200wifi.ko"
W: Possible missing firmware "iwmc3200wifi-calib-sdio.bin" for kernel module "iwmc3200wifi.ko"
W: Possible missing firmware "iwmc3200wifi-umac-sdio.bin" for kernel module "iwmc3200wifi.ko"
W: Possible missing firmware "symbol_sp24t_sec_fw" for kernel module "orinoco.ko"
W: Possible missing firmware "symbol_sp24t_prim_fw" for kernel module "orinoco.ko"
W: Possible missing firmware "prism_ap_fw.bin" for kernel module "orinoco.ko"
W: Possible missing firmware "prism_sta_fw.bin" for kernel module "orinoco.ko"
W: Possible missing firmware "prism2_ru.fw" for kernel module "prism2_usb.ko"
I: *** Including module: ifcfg ***
I: *** Including module: plymouth ***
W: Possible missing firmware "radeon/SUMO2_me.bin" for kernel module "radeon.ko"
W: Possible missing firmware "radeon/SUMO2_pfp.bin" for kernel module "radeon.ko"
W: Possible missing firmware "radeon/SUMO_me.bin" for kernel module "radeon.ko"
W: Possible missing firmware "radeon/SUMO_pfp.bin" for kernel module "radeon.ko"
W: Possible missing firmware "nouveau/fuc41ad" for kernel module "nouveau.ko"
W: Possible missing firmware "nouveau/fuc41ac" for kernel module "nouveau.ko"
W: Possible missing firmware "nouveau/fuc409d" for kernel module "nouveau.ko"
W: Possible missing firmware "nouveau/fuc409c" for kernel module "nouveau.ko"
W: Possible missing firmware "nouveau/nvc4_fuc41ad" for kernel module "nouveau.ko"
W: Possible missing firmware "nouveau/nvc4_fuc41ac" for kernel module "nouveau.ko"
W: Possible missing firmware "nouveau/nvc4_fuc409d" for kernel module "nouveau.ko"
W: Possible missing firmware "nouveau/nvc4_fuc409c" for kernel module "nouveau.ko"
W: Possible missing firmware "nouveau/nvc3_fuc41ad" for kernel module "nouveau.ko"
W: Possible missing firmware "nouveau/nvc3_fuc41ac" for kernel module "nouveau.ko"
W: Possible missing firmware "nouveau/nvc3_fuc409d" for kernel module "nouveau.ko"
W: Possible missing firmware "nouveau/nvc3_fuc409c" for kernel module "nouveau.ko"
W: Possible missing firmware "nouveau/nvc0_fuc41ad" for kernel module "nouveau.ko"
W: Possible missing firmware "nouveau/nvc0_fuc41ac" for kernel module "nouveau.ko"
W: Possible missing firmware "nouveau/nvc0_fuc409d" for kernel module "nouveau.ko"
W: Possible missing firmware "nouveau/nvc0_fuc409c" for kernel module "nouveau.ko"
I: *** Including module: crypt ***
I: *** Including module: dm ***
I: Skipping udev rule: 64-device-mapper.rules
I: *** Including module: dmraid ***
I: Skipping udev rule: 64-device-mapper.rules
I: *** Including module: dmsquash-live ***
I: *** Including module: kernel-modules ***
W: Possible missing firmware "cbfw_fc.bin" for kernel module "bfa.ko"
W: Possible missing firmware "ctfw_cna.bin" for kernel module "bfa.ko"
W: Possible missing firmware "ctfw_fc.bin" for kernel module "bfa.ko"
W: Possible missing firmware "isci/isci_firmware.bin" for kernel module "isci.ko"
W: Possible missing firmware "aic94xx-seq.fw" for kernel module "aic94xx.ko"
I: *** Including module: lvm ***
I: Skipping udev rule: 64-device-mapper.rules
I: *** Including module: mdraid ***
I: *** Including module: fcoe ***
I: *** Including module: nfs ***
I: *** Including module: resume ***
I: *** Including module: rootfs-block ***
I: *** Including module: terminfo ***
I: *** Including module: udev-rules ***
I: Skipping udev rule: 50-udev.rules
I: Skipping udev rule: 95-late.rules
I: *** Including module: aufs-mount ***
I: *** Including module: base ***
I: *** Including modules done ***
I: Wrote /boot/initrd-3.0.0-desktop-nrj.69mib.img:
I: -rw-r--r-- 1 root root 28052392 ago 3 11:40 /boot/initrd-3.0.0-desktop-nrj.69mib.img
It's the same message if i execute this:
Code: Select all
plymouth-set-default-theme --rebuild-initrd Mandriva-Free
nicco said to me that this message is no problem, but it is not so
Re: Kernel 3.0.0 + -NRJ and -NRJ-PAE for 2010.1, 2010.2, 201
Posted: 3 August 2011, 17:42
by braytac
Understood NicCo
.I just commented on the problem, the same way that people reports problems with proprietary drivers, etc..
Thanks!
Re: Kernel 3.0.0 + -NRJ and -NRJ-PAE for 2010.1, 2010.2, 201
Posted: 3 August 2011, 20:59
by NicCo
@braytac
There were some saying that starting from 3.0.0, some old programs could have some unexpected problems:
the reason could be in a stupid thing:
- up to kernel 2.6.39.X, the version number was 4 digit
- starting from kernel 3.0.X this number has only 3 digit
perhaps this can lead to some problems with certain old programs
Fedora seems wishing adopting a different scheme version to avoid any possible problems:
they are going to rename 3.0.0 as 2.6.40.x, 3.1.x as 2.6.41.x, and so on
bye, NicCo
Re: Kernel 3.0.0 + -NRJ and -NRJ-PAE for 2010.1, 2010.2, 201
Posted: 4 August 2011, 12:53
by tobal
At last kernel 3.0.0 works fine in my PC
Pay attention please, it is very important!!!
I have installed nvidia driver from mdv repositories. I had configurated drivers with XFDrake, but it not configure the drivers right. I started everytime my laptop and appeared the nvidia shoot image, and i thought i had all good but not so.
First step, look if you have a tmp folder in your home directory, if it is not, then make it
Second step, go to XFDrake and install your nvidia correctly.
Finally reboot your laptop or pc
That's all
Thanks and exvcuse my bad humour nicco
Bye
Re: Kernel 3.0.0 + -NRJ and -NRJ-PAE for 2010.1, 2010.2, 201
Posted: 4 August 2011, 13:29
by NicCo
@Tobal
I can understand that having the PC with OS not more bootable is not a thing making happy,
and that you are a little too impulsive and easy to lose your temper,
but also smart and stubborn enough to try again and find the solution yourself...
I'm very happy you found the solution to make the kernel 3.0.0 working also in your laptop pc,
but in the end what was the problem? A lacking temp folder in your home?
Can you test now your sensor's temp and how much your battery last
- with kernel 2.6.38.7
- with kernel 3.0.0
All other guys with new kernel 3 we have the feedback apart ourselves, report:
the temp is much lower and laptop is cooler while the battery is lasting about the double
bye, NicCo
Re: Kernel 3.0.0 + -NRJ and -NRJ-PAE for 2010.1, 2010.2, 201
Posted: 5 August 2011, 18:03
by verg
Successfuly got upgrade from Mandriva2010.2Free32bit(KDE clean install) to Mandriva2011.0 and also installed kernel-3.0.0-nrj on it(no problems at all).
So no systemd and networkmanager in system use.
Net-applet are used for network-up and seems i need patched
drakx-net package =)
With default kernel 38.7 net-applet is OK.
Re: Kernel 3.0.0 + -NRJ and -NRJ-PAE for 2010.1, 2010.2, 201
Posted: 5 August 2011, 18:18
by astragalo
It's ready in the same repo.
Bye.
Re: Kernel 3.0.0 + -NRJ and -NRJ-PAE for 2010.1, 2010.2, 201
Posted: 5 August 2011, 18:45
by verg
Yes, this is a good idea to use drakx-net v.0.90 from 2010.2 repo =)
Because the system really don't need upgraded drakx-net v.0.93
But i have to put these packages to urpmi skip list.
And force installation for drakx-net-applet0.93
Re: Kernel 3.0.0 + -NRJ and -NRJ-PAE for 2010.1, 2010.2, 201
Posted: 5 August 2011, 18:56
by tobal
verg wrote:Yes, this is a good idea to use drakx-net v.0.90 from 2010.2 repo =)
Because the system really don't need upgraded drakx-net v.0.93
But i have to put these packages to urpmi skip list.
Well, the patch is applied in the 2011.0 net-applet but it seems not work. Anyway, this bug is a nonsense, and net-applet not commin' installed by default with 2011, because it uses network-manager and plasma-networkmanager, and it appears as connected. Mandriva not have a good program with drakx-net, a lot of bugs.