Kernel 3.12.11 for ROSA 2012 2012.1 OMV 2013 2014 cooker

[NicCo]

Kernel 3.12.11 for ROSA 2012lts, rosa2012.1 and omv2013.0, omv2014.0, and cooker (omv2014.0)


Kernel 3.12.11 - https://lwn.net/Articles/586146/


Since this version we use the new stable major version of BFQ v7r2

read more about BFQv7r2:
viewtopic.php?p=23575#p23575

Code: Select all

%changelog

* Fri Feb 14 2014 Nicolo' Costanza <abitrules@yahoo.it> 3.12.11-69
+ kernel 3.12.11 stable
- add: H930C-part1.patch, H930C-part2.patch, H930C-part3.patch
- add: kernel-3.11.8-i915-quirk-acer-aspire-v3-772g.patch
- drop: 2 drm patches, already in mainstream
- update: BFQ (disk I/O scheduler) from v7r1 to v7r2
- update: linux-saa716x_PCIe_interface_chipset.patch
- ---------------------------------------------------------------------
- Kernel 3.12 for mdv 2010.2, 2011.0, cooker, rosa.lts2012.0, rosa2012.1
- MIB (Mandriva International Backports) - http://mib.pianetalinux.org/
- The rel -1 (mainline serie), with official kernel sources and addons,
- instead (-69) will be used for development and experimental flavours,
- Yin & Yang (69) release - a very complete but experimental flavours...
- ---------------------------------------------------------------------

* Tue Feb 11 2014 Nicolo' Costanza <abitrules@yahoo.it> 3.12.10-69
+ kernel 3.12.10 stable
- update BFQ (disk I/O scheduler) to v7r1
- enable the key: CONFIG_DRM_RADEON_UMS=y
- drop 12 patches, already in mainstream
- ---------------------------------------------------------------------
- Kernel 3.12 for mdv 2010.2, 2011.0, cooker, rosa.lts2012.0, rosa2012.1
- MIB (Mandriva International Backports) - http://mib.pianetalinux.org/
- The rel -1 (mainline serie), with official kernel sources and addons,
- instead (-69) will be used for development and experimental flavours,
- Yin & Yang (69) release - a very complete but experimental flavours...
- ---------------------------------------------------------------------

* Tue Feb 04 2014 Nicolo' Costanza <abitrules@yahoo.it> 3.12.9-69v7
+ this is only a fix release replacement - not changed release nr.
- create_configs > enabled NAMESPACES & UIDGID_STRICT_TYPE_CHECKS
- this release has new BFQv7 enabled, prepared for testing purposes
- ---------------------------------------------------------------------
- Kernel 3.12 for mdv 2010.2, 2011.0, cooker, rosa.lts2012.0, rosa2012.1
- MIB (Mandriva International Backports) - http://mib.pianetalinux.org/
- The rel -1 (mainline serie), with official kernel sources and addons,
- instead (-69) will be used for development and experimental flavours,
- Yin & Yang (69) release - a very complete but experimental flavours...
- ---------------------------------------------------------------------

* Tue Feb 04 2014 Nicolo' Costanza <abitrules@yahoo.it> 3.12.9-69
+ this is only a fix release replacement - not changed release nr.
- create_configs > enabled NAMESPACES & UIDGID_STRICT_TYPE_CHECKS
- this release has BFQv6r2, not the newest BFQv7, better waiting...
- ---------------------------------------------------------------------
- Kernel 3.12 for mdv 2010.2, 2011.0, cooker, rosa.lts2012.0, rosa2012.1
- MIB (Mandriva International Backports) - http://mib.pianetalinux.org/
- The rel -1 (mainline serie), with official kernel sources and addons,
- instead (-69) will be used for development and experimental flavours,
- Yin & Yang (69) release - a very complete but experimental flavours...
- ---------------------------------------------------------------------

* Sun Feb 02 2014 Nicolo' Costanza <abitrules@yahoo.it> 3.12.9-69v7
+ kernel 3.12.9 stable
- this is the first testing version with new BFQv7 disk I/O scheduler
- ---------------------------------------------------------------------
- Kernel 3.10 for mdv 2010.2, 2011.0, cooker, rosa.lts2012.0, rosa2012.1
- MIB (Mandriva International Backports) - http://mib.pianetalinux.org/
- The rel -1 (mainline serie), with official kernel sources and addons,
- the rel -69  is used for development and the experimental flavours,
- the rel -70 is merge of mainline & experimental flavours in ONE srpm
- Yin & Yang (69) release - a very complete but experimental flavours...
- ---------------------------------------------------------------------

* Thu Jan 30 2014 Nicolo' Costanza <abitrules@yahoo.it> 3.12.9-69
+ update to 3.12.9 stable
- small fixes and cleanups:
- removed all the remaining warning msgs from create_configs:
- fixed .defconfigs (arm.config, i386.config, x86_64.config)
 - satisfied all build CHK (audit, numa and unwind):
- BuildRequires: audit-devel numa-devel unwind-devel
- sync & add new patches
- ---------------------------------------------------------------------
- Kernel 3.12 for mdv 2010.2, 2011.0, cooker, rosa.lts2012.0, rosa2012.1
- MIB (Mandriva International Backports) - http://mib.pianetalinux.org/
- The rel -1 (mainline serie), with official kernel sources and addons,
- instead (-69) will be used for development and experimental flavours,
- Yin & Yang (69) release - a very complete but experimental flavours...
- ---------------------------------------------------------------------

First ABF rebuilds are currently work in progress...

I've noticed that lately ABF build nodes are much slower than usual:
I enabled -desktop, -laptop, -realtime, -server and their related -pae

this time the rpms will be available for for rosa2012lts, rosa 2012.1, and omv2013, omv2014
for rosa 2012lts now there are some issues related with repositories stopping the x86_64 build...
for omv2014 now there are some issues related with repositories stopping the i586 build...



These below are the rebuilds in progress for 3.12.11

nrj >>> https://abf.rosalinux.ru/kernels_3_12x/ ... uild_lists
- kernel-nrj-desktop and kernel-nrj-desktop-pae
- kernel-nrj-laptop and kernel-nrj-laptop-pae
- kernel-nrj-realtime and kernel-nrj-realtime-pae
- kernel-nrj-server

nrjQL >>> https://abf.rosalinux.ru/kernels_3_12x/ ... uild_lists
- kernel-nrjQL-desktop and kernel-nrjQL-desktop-pae
- kernel-nrjQL-laptop and kernel-nrjQL-laptop-pae
- kernel-nrjQL-realtime and kernel-nrjQL-realtime-pae
- kernel-nrjQL-server



IMPORTANT:
I remind you the base repo address for kernels 3.12 link:
http://abf.rosalinux.ru/downloads/kerne ... epository/

We noticed that Kernel 3.12 did not work with Virtualization Apps,
we found a solution to be applied directly to the vmware sources

VMware and Kernel issues, how to fix with kernel >= 3.12
viewtopic.php?f=38&t=4339

Please, report your experience with this kernel and vmware 10.0.1 player 6.0.1

General Info about kernel 3.12
http://kernelnewbies.org/Linux_3.12

bye, NicCo

[NicCo]

My first install for Kernel 3.12.11 confirms that even on the old ROSA Marathon x86_64, it boots and runs very smooth
(the installed rpms come from my local rebuild task on the same PC that I use to develop and prepare all new kernels)

Code: Select all

$ uname -a
Linux localhost.localdomain 3.12.11-nrjQL-desktop-69rosa.lts #1 SMP PREEMPT Fri Feb 14 20:44:58 CET 2014 x86_64 x86_64 x86_64 GNU/Linux

$ cat /sys/block/sda/queue/scheduler
noop deadline cfq [bfq]

$ inxi -F
System:    Host: localhost.localdomain Kernel: 3.12.11-nrjQL-desktop-69rosa.lts x86_64 (64 bit)
           Desktop: KDE 4.8.3 Distro: ROSALinux 2012.0 turtle
Machine:   Mobo: ASUSTek model: M2NPV-VM version: 1.xx Bios: Phoenix version: ASUS M2NPV-VM 1401 date: 08/07/2008
CPU:       Dual core AMD Athlon 64 X2 6400+ (-MCP-) cache: 2048 KB flags: (lm nx sse sse2 sse3 svm)
           Clock Speeds: 1: 3206.644 MHz 2: 3206.644 MHz
Graphics:  Card: nVidia C51PV [GeForce 6150] X.Org: 1.10.3 drivers: nv (unloaded: vesa,fbdev) Resolution: 1280x1024@60.0hz
           GLX Renderer: Gallium 0.4 on llvmpipe GLX Version: 2.1 Mesa 7.11.2
Audio:     Card: Creative Labs SB Audigy driver: snd_emu10k1 Sound: ALSA ver: k3.12.11-nrjQL-desktop-69rosa.lts
Network:   Card: nVidia MCP51 Ethernet Controller driver: forcedeth
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: 00:18:f3:e2:1d:f4
Drives:    HDD Total Size: 5001.0GB (17.4% used) 1: id: /dev/sda model: ST31000528AS size: 1000.2GB
           2: id: /dev/sdb model: WDC_WD20EARS size: 2000.4GB 3: id: /dev/sdc model: WDC_WD20EARS size: 2000.4GB
Partition: ID: / size: 50G used: 12G (24%) fs: ext4 ID: /home size: 366G used: 347G (95%) fs: ext4
           ID: swap-1 size: 10.74GB used: 0.00GB (0%) fs: swap ID: swap-2 size: 10.74GB used: 0.00GB (0%) fs: swap
RAID:      No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
Sensors:   System Temperatures: cpu: 31.0C mobo: 25.0C
           Fan Speeds (in rpm): cpu: 3358 sys-1: 0
Info:      Processes: 278 Uptime: 3 min Memory: 2043.7/3922.6MB Client: Shell (bash) inxi: 1.9.14

[NicCo]

My first install for Kernel 3.12.11 on the newest OpenMandriva LX 2013 x86_64, it boots and runs very smooth

Code: Select all

[nicco@localhost ~]$ uname -a
Linux localhost.localdomain 3.12.11-nrjQL-laptop-69omv #1 SMP PREEMPT Fri Feb 14 22:54:38 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux

[nicco@localhost ~]$ cat /sys/block/sda/queue/scheduler
noop deadline cfq [bfq]

[nicco@localhost ~]$ inxi -F
System:    Host: localhost.localdomain Kernel: 3.12.11-nrjQL-laptop-69omv x86_64 (64 bit)
           Desktop: KDE 4.11.2 Distro: OpenMandrivaLinux 2013.0 oxygen
Machine:   Mobo: Acer model: JE02_PT version: V3.13(DDR3) Bios: Acer version: V3.13(DDR3) date: 12/23/2010
CPU:       Single core Intel Atom CPU N455 (-HT-) cache: 512 KB flags: (lm nx sse sse2 sse3 ssse3)
           Clock Speeds: 1: 1000.00 MHz 2: 1666.00 MHz
Graphics:  Card: Intel Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller
           X.Org: 1.14.3 drivers: intel (unloaded: fbdev,vesa) Resolution: 1024x600@60.0hz
           GLX Renderer: Gallium 0.4 on i915 ( GLX Version: 2.1 Mesa 9.2.1
Audio:     Card: Intel NM10/ICH7 Family High Definition Audio Controller driver: snd_hda_intel
           Sound: Advanced Linux Sound Architecture ver: k3.12.11-nrjQL-laptop-69omv
Network:   Card-1: Broadcom BCM4313 802.11b/g/n Wireless LAN Controller driver: bcma-pci-bridge
           IF: wlan0 state: up mac: 88:9f:fa:3a:ed:5c
           Card-2: Qualcomm Atheros AR8152 v1.1 Fast Ethernet driver: atl1c
           IF: eth0 state: down mac: 1c:75:08:b9:08:51
Drives:    HDD Total Size: 250.1GB (17.8% used) 1: id: /dev/sda model: TOSHIBA_MK2565GS size: 250.1GB
Partition: ID: / size: 25G used: 8.9G (38%) fs: ext4 ID: /home size: 201G used: 33G (17%) fs: ext4
           ID: swap-1 size: 4.30GB used: 0.00GB (0%) fs: swap
RAID:      No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
Sensors:   System Temperatures: cpu: 39.0C mobo: N/A
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 149 Uptime: 52 min Memory: 894.0/1993.1MB Client: Shell (bash) inxi: 1.9.16


[jclvanier]

Hi,
it seems to work fine on OMLx 2013, but I have just a problem with network-monitor which doesn't display the wifi networks immediately (more than 1 min).

EDIT: btw, do you know why all the kernels packages have a bas signature in OMLx ?

[Alexander83]

Update kernel on my notebook & desktop with om 2013: works fine!

[NicCo]

On the PC of my friend 'Francesco' with ROSA Fresh 64bit, I'm posting his installation, then after the reboot, his the results just below...

Code: Select all

[root@localhost ~]# urpmi.addmedia Kernel_3.12 http://abf.rosalinux.ru/downloads/kernels_3_12x_personal/repository/rosa2012.1/x86_64/main/release

[root@localhost ~]# urpmi --auto-select                                                                       
I pacchetti bootloader-utils-1.15-9-rosa2012.1.noarch, lib64atk1.0_0-2.8.0-1-rosa2012.1.x86_64, lib64gobject2.0_0-2.36.3-4-rosa2012.1.x86_64, perl-base-5.14.2-8-rosa2012.1.x86_64, lib64dw1-0.153-1-rosa2012.1.x86_64, rpm-helper-0.24.1-3-rosa2012.1.noarch, lib64ncurses-devel-5.9-6.20120811.1-rosa2012.1.x86_64, lib64gdk_pixbuf2.0_0-2.28.2-1-rosa2012.1.x86_64, dracut-027-17-rosa2012.1.x86_64, glibc-2.15-8-rosa2012.1.x86_64, lib64fontconfig1-2.10.93-2plf-plf2012.1.x86_64, lib64gtk+2.0_0-2.24.22-2-rosa2012.1.x86_64, lib64freetype6-2.4.12-1plf-plf2012.1.x86_64, glibc-devel-2.15-8-rosa2012.1.x86_64, lib64python2.7-2.7.6-1-rosa2012.1.x86_64, lib64gio2.0_0-2.36.3-4-rosa2012.1.x86_64, lib64elf1-0.153-1-rosa2012.1.x86_64, lib64pci3-3.2.0-4-rosa2012.1.x86_64, perl-5.14.2-8-rosa2012.1.x86_64, linux-firmware-20131001-6.gitb8ac7c7e-rosa2012.1.noarch, lib64pangocairo1.0_0-1.34.1-1-rosa2012.1.x86_64, lib64pango1.0_0-1.34.1-1-rosa2012.1.x86_64, kmod-15-1-rosa2012.1.x86_64, lib64audit1-2.1.2-4-rosa2012.1.x86_64, lib64slang2-2.2.
4-8-rosa2012.1.x86_64, sysfsutils-2.1.0-20-rosa2012.1.x86_64, lib64glib2.0_0-2.36.3-4-rosa2012.1.x86_64, python3-3.3.3-1-rosa2012.1.x86_64, gcc-4.7.4_2014.01-1-rosa2012.1.x86_64, make-3.82-6-rosa2012.1.x86_64, lib64cairo2-1.12.16-1-rosa2012.1.x86_64, lib64pangoft2_1.0_0-1.34.1-1-rosa2012.1.x86_64 sono già installati                           
Per soddisfare le dipendenze, saranno installati i seguenti pacchetti:                                           
 Pacchetto                              Versione     Release       Dist  DEpoch Arch.                             
(supporto "Main_64_updates")                                                                                     
 lib64numa1                             2.0.9        1             rosa  2012.1 x86_64
(supporto "Kernel_3.12")
 cpupower                               3.12.11      69            rosa  2012.1 x86_64
 kernel-headers                         3.12.11      69            rosa  2012.1 x86_64
 kernel-nrj-desktop-3.12.11-1rosa       1            1             rosa  2012.1 x86_64
 kernel-nrj-desktop-devel-3.12.11-1rosa 1            1             rosa  2012.1 x86_64
 kernel-nrj-desktop-devel-latest        3.12.11      1             rosa  2012.1 x86_64
 kernel-nrj-desktop-latest              3.12.11      1             rosa  2012.1 x86_64
 kernel-nrjQL-desktop-3.12.11-69rosa    1            1             rosa  2012.1 x86_64
 kernel-nrjQL-desktop-latest            3.12.11      69            rosa  2012.1 x86_64
 perf                                   3.12.11      69            rosa  2012.1 x86_64
Altri 124MB di spazio disco saranno utilizzati.
verranno scaricati 93MB di pacchetti.
Procedo con l'installazione di 10 pacchetti? (S/n) s

Everything was fine in the logs during the first reboot, all went smooth, KDE is working very great and is incredible fast and responsive!

Code: Select all

[francesco@localhost ~]$ uname -a
Linux localhost.localdomain 3.12.11-nrj-desktop-1rosa #1 SMP PREEMPT Fri Feb 14 22:45:48 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux

[francesco@localhost ~]$ cat /sys/block/sda/queue/scheduler
noop deadline cfq [bfq]

[francesco@localhost ~]$ inxi -F
System:    Host: localhost.localdomain Kernel: 3.12.11-nrj-desktop-1rosa x86_64 (64 bit)
           Desktop: KDE 4.11.4 Distro: RosaDesktop.Fresh 2012.1 belka
Machine:   System: ASUS product: All Series
           Mobo: ASUSTeK model: H81M-A version: Rev X.0x Bios: American Megatrends version: 0604 date: 08/27/2013
CPU:       Dual core Intel Core i3-4130 CPU (-HT-MCP-) cache: 3072 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx)
           Clock Speeds: 1: 3400.00 MHz 2: 800.00 MHz 3: 800.00 MHz 4: 800.00 MHz
Graphics:  Card: Intel Device 041e X.Org: 1.14.5 drivers: intel (unloaded: fbdev,vesa) Resolution: 1280x1024@60.0hz
           GLX Renderer: Mesa DRI Intel Haswell GLX Version: 3.0 Mesa 9.2.4
Audio:     Card-1: Intel 8 Series/C220 Series High Definition Audio Controller driver: snd_hda_intel
           Card-2: Intel Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller driver: snd_hda_intel
           Sound: Advanced Linux Sound Architecture ver: k3.12.11-nrj-desktop-1rosa
Network:   Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: ac:22:0b:4d:57:49
Drives:    HDD Total Size: 2000.4GB (42.3% used) 1: id: /dev/sda model: ST1000DM003 size: 1000.2GB
           2: id: /dev/sdb model: ST1000DM003 size: 1000.2GB
Partition: ID: / size: 50G used: 9.9G (22%) fs: ext4 ID: /home size: 843G used: 290G (35%) fs: ext4
           ID: swap-1 size: 26.85GB used: 0.00GB (0%) fs: swap ID: swap-2 size: 26.85GB used: 0.00GB (0%) fs: swap
RAID:      No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
Sensors:   System Temperatures: cpu: 29.8C mobo: 27.8C
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 207 Uptime: 1 min Memory: 884.4/7671.7MB Client: Shell (bash) inxi: 1.9.14