Good afternoom,
I tried to create a bootable USB with "dd if=ROSA.BETA.XXXX.iso of=/dev/sdc (bs=1M)" and it wasn't able to start at boot. With same method I (re)create bootable USB with alpha2 and it works.
With ROSA beta I burned the release DVD and K3B didn't close it. This happend me in later time with a RC release of Mandriva maybe the 2009, it was fixed by the stable release. Same issue?
Best regards.
Luca
USB unbootable with beta version[SOLVED]
- lucazio
- Nuovo utente
- Posts: 8
- Joined: 19 October 2010, 15:06
- ROSA: 2012.1
- OpenMandriva: 2011
- Kernel: 3.5.7
- Desktop: kde 4.9.2
- country: Rome ITALY
USB unbootable with beta version[SOLVED]
Last edited by lucazio on 27 October 2012, 16:53, edited 1 time in total.
- rugyada
- Amministratore
- Posts: 1562
- Joined: 14 July 2008, 22:58
- ROSA: ROSA.Fresh R8 64bit
- OpenMandriva: OMLx 4.2
- Kernel: kernel-release
- Desktop: KDE tutta la vita
- country: Italy
Re: USB unbootable with beta version
Hello Luca,
http://forum.rosalab.ru/en/viewtopic.php?f=13&t=1365
and
http://wiki.rosalab.ru/en/index.php/Err ... age_issues
take a look if this may help you:I tried to create a bootable USB with "dd if=ROSA.BETA.XXXX.iso of=/dev/sdc (bs=1M)" and it wasn't able to start at boot.
http://forum.rosalab.ru/en/viewtopic.php?f=13&t=1365
and
http://wiki.rosalab.ru/en/index.php/Err ... age_issues
ciauu ciauu, ruru
MIB... e le stelle stanno a guardare.
«E' bello avere delle certezze, tipo la terra gira, il sole è caldo, se ti prendi con quelli del MIB vieni fanculizzato. Cose semplici, in fondo» (M.C.)
- lucazio
- Nuovo utente
- Posts: 8
- Joined: 19 October 2010, 15:06
- ROSA: 2012.1
- OpenMandriva: 2011
- Kernel: 3.5.7
- Desktop: kde 4.9.2
- country: Rome ITALY
Re: USB unbootable with beta version
Good afternoon rugyada,
as far I can see, one more time I failed my resarch!
Now I understand why my problem was caused from.
1000 thanks.
Good bye, Luca.
as far I can see, one more time I failed my resarch!
Now I understand why my problem was caused from.
1000 thanks.
Good bye, Luca.
Re: USB unbootable with beta version[SOLVED]
Scusatemi, sono curioso
Ma quel'eras poi il problema e la relativa soluzione applicata?
Ciao, NicCo
Ma quel'eras poi il problema e la relativa soluzione applicata?
Ciao, NicCo
.
--- Professional experience ---
Kernel designer, engineer, maintainer and tester for ROSA Desktop and OpenMandriva Lx O.S.
--- currently I'm playing with ---
LTS Kernels > Linux 4.1.12-nrjQL <<< Linux 3.18.17-nrjQL <<< Linux 3.14.46-nrjQL
EOL Kernels > Linux 3.19.8-nrjQL <<< Linux 3.17.8-nrjQL <<< Linux 3.15.10-nrjQL
--- Professional experience ---
Kernel designer, engineer, maintainer and tester for ROSA Desktop and OpenMandriva Lx O.S.
--- currently I'm playing with ---
LTS Kernels > Linux 4.1.12-nrjQL <<< Linux 3.18.17-nrjQL <<< Linux 3.14.46-nrjQL
EOL Kernels > Linux 3.19.8-nrjQL <<< Linux 3.17.8-nrjQL <<< Linux 3.15.10-nrjQL
- lucazio
- Nuovo utente
- Posts: 8
- Joined: 19 October 2010, 15:06
- ROSA: 2012.1
- OpenMandriva: 2011
- Kernel: 3.5.7
- Desktop: kde 4.9.2
- country: Rome ITALY
Re: USB unbootable with beta version[SOLVED]
@nicco
Ciao,
la soluzione è quella di scaricare le iso che possono essere scritte su USB e fare il boot con quelle.
Infatti il link di rugyada fa riferimento alla iso i586, scrivibile su USB, che ha un peso di 1GB, mentre quella che io ho messo sulla pennetta era di 1.5GB; l'altro link spiegava che c'erano queste differenza delle versioni della ROSA beta.
Ho anche accennato a K3B e qui in effetti credo che sia un bug della ROSA beta che non è stabile, in anni passati mi successe anche con una RC Mandriva; non chiudeva la scrittura del DVD. Io per scrivere il supporto fisico ho usato Mandriva 2011, poi dal disco, con la iso da 1.5GB, ho installato la ROSA beta.
Non ho creato una USB bootable della beta ma se vuoi provo......se vuoi che provi a usare un'altra volta K3B ..... lo faccio solo per te.
Ciao, Luca.
Ciao,
la soluzione è quella di scaricare le iso che possono essere scritte su USB e fare il boot con quelle.
Infatti il link di rugyada fa riferimento alla iso i586, scrivibile su USB, che ha un peso di 1GB, mentre quella che io ho messo sulla pennetta era di 1.5GB; l'altro link spiegava che c'erano queste differenza delle versioni della ROSA beta.
Ho anche accennato a K3B e qui in effetti credo che sia un bug della ROSA beta che non è stabile, in anni passati mi successe anche con una RC Mandriva; non chiudeva la scrittura del DVD. Io per scrivere il supporto fisico ho usato Mandriva 2011, poi dal disco, con la iso da 1.5GB, ho installato la ROSA beta.
Non ho creato una USB bootable della beta ma se vuoi provo......se vuoi che provi a usare un'altra volta K3B ..... lo faccio solo per te.
Ciao, Luca.
Re: USB unbootable with beta version[SOLVED]
Dal momento che mi hai fatto venire il dubbio che K3B su ROSA 2012.1 possa funzionare male
ho provveduto a segnalarlo, così magari lo testano a fondo
viewtopic.php?f=55&t=3545
è sul punto 28, adesso in coda
Ciao, NicCo
ho provveduto a segnalarlo, così magari lo testano a fondo
viewtopic.php?f=55&t=3545
è sul punto 28, adesso in coda
Ciao, NicCo
.
--- Professional experience ---
Kernel designer, engineer, maintainer and tester for ROSA Desktop and OpenMandriva Lx O.S.
--- currently I'm playing with ---
LTS Kernels > Linux 4.1.12-nrjQL <<< Linux 3.18.17-nrjQL <<< Linux 3.14.46-nrjQL
EOL Kernels > Linux 3.19.8-nrjQL <<< Linux 3.17.8-nrjQL <<< Linux 3.15.10-nrjQL
--- Professional experience ---
Kernel designer, engineer, maintainer and tester for ROSA Desktop and OpenMandriva Lx O.S.
--- currently I'm playing with ---
LTS Kernels > Linux 4.1.12-nrjQL <<< Linux 3.18.17-nrjQL <<< Linux 3.14.46-nrjQL
EOL Kernels > Linux 3.19.8-nrjQL <<< Linux 3.17.8-nrjQL <<< Linux 3.15.10-nrjQL