ROSA 2012.1 private beta2 nrj & nrjQL ISOs for testing...
ROSA 2012.1 private beta2 nrj & nrjQL ISOs for testing...
These beta2 ISOs contain all rpms updated to yesterday!
This ISO with Kernel nrj QL is only 64bit
The ISOs with Kernel nrj are 32 & 64bit
This is equipped by kernel-nrjQL 3.6.6-69
with CK1, BFS, BFQ, TOI, UKSM, OverlayFS, ...
ISOs with kernel-nrj-desktop-3.6.6-2, here:
>>>>
bye, NicCo
This ISO with Kernel nrj QL is only 64bit
The ISOs with Kernel nrj are 32 & 64bit
This is equipped by kernel-nrjQL 3.6.6-69
with CK1, BFS, BFQ, TOI, UKSM, OverlayFS, ...
ISOs with kernel-nrj-desktop-3.6.6-2, here:
>>>>
bye, NicCo
.
--- Professional experience ---
Kernel designer, engineer, maintainer and tester for ROSA Desktop and OpenMandriva Lx O.S.
--- currently I'm playing with ---
LTS Kernels > Linux 4.1.12-nrjQL <<< Linux 3.18.17-nrjQL <<< Linux 3.14.46-nrjQL
EOL Kernels > Linux 3.19.8-nrjQL <<< Linux 3.17.8-nrjQL <<< Linux 3.15.10-nrjQL
--- Professional experience ---
Kernel designer, engineer, maintainer and tester for ROSA Desktop and OpenMandriva Lx O.S.
--- currently I'm playing with ---
LTS Kernels > Linux 4.1.12-nrjQL <<< Linux 3.18.17-nrjQL <<< Linux 3.14.46-nrjQL
EOL Kernels > Linux 3.19.8-nrjQL <<< Linux 3.17.8-nrjQL <<< Linux 3.15.10-nrjQL
- promeneur
- Utente senior
- Posts: 547
- Joined: 6 February 2009, 17:47
- ROSA: -
- OpenMandriva: 2010.3 i586
- Kernel: 3.5.7 nrj dsktp pae
- Desktop: MIB kde 4.8.4
- country: France
Re: ROSA 2012.1 private beta2 nrj & nrjQL ISOs for testing..
is it an hybrid iso ?
Asus M2N, AMD Athlon 64 X2 5000+, 8 GB, Asus Nvidia 210 silent, Linksys WMP600N, Plugable USB-BT4LE Bluetooth 4.0 Adapter, lecteur multicarte Addonics AEIDDSAU, HP LaserJet 1220
Re: ROSA 2012.1 private beta2 nrj & nrjQL ISOs for testing..
Yes, they are.promeneur wrote:is it an hybrid iso ?
Copying, right now, in my usb stick, below my own command string
Code: Select all
dd if=/media/2TB/ROSA/2012.1-Beta2/ROSA.2012.Desktop.Beta2.x86_64.iso of=/dev/sdd bs=8M ; sync
.
--- Professional experience ---
Kernel designer, engineer, maintainer and tester for ROSA Desktop and OpenMandriva Lx O.S.
--- currently I'm playing with ---
LTS Kernels > Linux 4.1.12-nrjQL <<< Linux 3.18.17-nrjQL <<< Linux 3.14.46-nrjQL
EOL Kernels > Linux 3.19.8-nrjQL <<< Linux 3.17.8-nrjQL <<< Linux 3.15.10-nrjQL
--- Professional experience ---
Kernel designer, engineer, maintainer and tester for ROSA Desktop and OpenMandriva Lx O.S.
--- currently I'm playing with ---
LTS Kernels > Linux 4.1.12-nrjQL <<< Linux 3.18.17-nrjQL <<< Linux 3.14.46-nrjQL
EOL Kernels > Linux 3.19.8-nrjQL <<< Linux 3.17.8-nrjQL <<< Linux 3.15.10-nrjQL
- promeneur
- Utente senior
- Posts: 547
- Joined: 6 February 2009, 17:47
- ROSA: -
- OpenMandriva: 2010.3 i586
- Kernel: 3.5.7 nrj dsktp pae
- Desktop: MIB kde 4.8.4
- country: France
Re: ROSA 2012.1 private beta2 nrj & nrjQL ISOs for testing..
mandriva-seeds says "it is not an hybrid iso"
unetbootin does not see my usb card device or my usb key
then
i will try you command
unetbootin does not see my usb card device or my usb key
then
i will try you command
Asus M2N, AMD Athlon 64 X2 5000+, 8 GB, Asus Nvidia 210 silent, Linksys WMP600N, Plugable USB-BT4LE Bluetooth 4.0 Adapter, lecteur multicarte Addonics AEIDDSAU, HP LaserJet 1220
- promeneur
- Utente senior
- Posts: 547
- Joined: 6 February 2009, 17:47
- ROSA: -
- OpenMandriva: 2010.3 i586
- Kernel: 3.5.7 nrj dsktp pae
- Desktop: MIB kde 4.8.4
- country: France
Re: ROSA 2012.1 private beta2 nrj & nrjQL ISOs for testing..
during first steps of the installation at random time my pc freezes
or
stop progressing with a grey window with a message "preparation be patient"
i tried the option "install with basic graphical driver" : same freeze
or
stop progressing with a grey window with a message "preparation be patient"
i tried the option "install with basic graphical driver" : same freeze
Asus M2N, AMD Athlon 64 X2 5000+, 8 GB, Asus Nvidia 210 silent, Linksys WMP600N, Plugable USB-BT4LE Bluetooth 4.0 Adapter, lecteur multicarte Addonics AEIDDSAU, HP LaserJet 1220
Re: ROSA 2012.1 private beta2 nrj & nrjQL ISOs for testing..
Which ISO are you trying now?promeneur wrote:during first steps of the installation at random time my pc freezes
or
stop progressing with a grey window with a message "preparation be patient"
i tried the option "install with basic graphical driver" : same freeze
.
--- Professional experience ---
Kernel designer, engineer, maintainer and tester for ROSA Desktop and OpenMandriva Lx O.S.
--- currently I'm playing with ---
LTS Kernels > Linux 4.1.12-nrjQL <<< Linux 3.18.17-nrjQL <<< Linux 3.14.46-nrjQL
EOL Kernels > Linux 3.19.8-nrjQL <<< Linux 3.17.8-nrjQL <<< Linux 3.15.10-nrjQL
--- Professional experience ---
Kernel designer, engineer, maintainer and tester for ROSA Desktop and OpenMandriva Lx O.S.
--- currently I'm playing with ---
LTS Kernels > Linux 4.1.12-nrjQL <<< Linux 3.18.17-nrjQL <<< Linux 3.14.46-nrjQL
EOL Kernels > Linux 3.19.8-nrjQL <<< Linux 3.17.8-nrjQL <<< Linux 3.15.10-nrjQL
- promeneur
- Utente senior
- Posts: 547
- Joined: 6 February 2009, 17:47
- ROSA: -
- OpenMandriva: 2010.3 i586
- Kernel: 3.5.7 nrj dsktp pae
- Desktop: MIB kde 4.8.4
- country: France
Re: ROSA 2012.1 private beta2 nrj & nrjQL ISOs for testing..
the x86_64 one, kernel-nrj-desktop-3.6.6-2Which ISO are you trying now?
Asus M2N, AMD Athlon 64 X2 5000+, 8 GB, Asus Nvidia 210 silent, Linksys WMP600N, Plugable USB-BT4LE Bluetooth 4.0 Adapter, lecteur multicarte Addonics AEIDDSAU, HP LaserJet 1220
Re: ROSA 2012.1 private beta2 nrj & nrjQL ISOs for testing..
Try removing "quiet" option from syslinux:
press TAB at some option remove quiet and then boot
let me know
press TAB at some option remove quiet and then boot
let me know
.
--- Professional experience ---
Kernel designer, engineer, maintainer and tester for ROSA Desktop and OpenMandriva Lx O.S.
--- currently I'm playing with ---
LTS Kernels > Linux 4.1.12-nrjQL <<< Linux 3.18.17-nrjQL <<< Linux 3.14.46-nrjQL
EOL Kernels > Linux 3.19.8-nrjQL <<< Linux 3.17.8-nrjQL <<< Linux 3.15.10-nrjQL
--- Professional experience ---
Kernel designer, engineer, maintainer and tester for ROSA Desktop and OpenMandriva Lx O.S.
--- currently I'm playing with ---
LTS Kernels > Linux 4.1.12-nrjQL <<< Linux 3.18.17-nrjQL <<< Linux 3.14.46-nrjQL
EOL Kernels > Linux 3.19.8-nrjQL <<< Linux 3.17.8-nrjQL <<< Linux 3.15.10-nrjQL
- promeneur
- Utente senior
- Posts: 547
- Joined: 6 February 2009, 17:47
- ROSA: -
- OpenMandriva: 2010.3 i586
- Kernel: 3.5.7 nrj dsktp pae
- Desktop: MIB kde 4.8.4
- country: France
Re: ROSA 2012.1 private beta2 nrj & nrjQL ISOs for testing..
i removed "quiet" option,
same result : freeze
when freeze happens then light of the disks stays "light on"
there is no error message
same result : freeze
when freeze happens then light of the disks stays "light on"
there is no error message
Asus M2N, AMD Athlon 64 X2 5000+, 8 GB, Asus Nvidia 210 silent, Linksys WMP600N, Plugable USB-BT4LE Bluetooth 4.0 Adapter, lecteur multicarte Addonics AEIDDSAU, HP LaserJet 1220
- Davide_01
- Utente junior
- Posts: 32
- Joined: 17 January 2008, 14:44
- ROSA: Desktop 2012
- OpenMandriva: Lx 2013.0
- Kernel: 3.11.6-nrjQL
- Desktop: KDE4
- country: ITALY
- Location: Genova
- Contact:
Re: ROSA 2012.1 private beta2 nrj & nrjQL ISOs for testing..
Hi,
I Have some problem to download ISO file nrjQL from the mirror 1 (I'm able to download 1G file not 1,4. I have tried twice)
I've just downloaded the file again from the mirror 2 it seams to have the right dimension, but I'm not able to check MD5 sum, now I try to instal that.
Please could you provide MD5 checksum also for nrjQL iso?
Thank you
Davide_01
http://www.linux-corner.it
I Have some problem to download ISO file nrjQL from the mirror 1 (I'm able to download 1G file not 1,4. I have tried twice)
I've just downloaded the file again from the mirror 2 it seams to have the right dimension, but I'm not able to check MD5 sum, now I try to instal that.
Please could you provide MD5 checksum also for nrjQL iso?
Thank you
Davide_01
http://www.linux-corner.it
Davide_01
http://www.linux-corner.it
http://www.linux-corner.it
- promeneur
- Utente senior
- Posts: 547
- Joined: 6 February 2009, 17:47
- ROSA: -
- OpenMandriva: 2010.3 i586
- Kernel: 3.5.7 nrj dsktp pae
- Desktop: MIB kde 4.8.4
- country: France
Re: ROSA 2012.1 private beta2 nrj & nrjQL ISOs for testing..
Hello
i installed 2012.1 finaly in virtualbox
i don't like rosa task
i can't find kickoff plasmoid or kde classic menu plasmoid.
where are they ?
i installed 2012.1 finaly in virtualbox
i don't like rosa task
i can't find kickoff plasmoid or kde classic menu plasmoid.
where are they ?
Asus M2N, AMD Athlon 64 X2 5000+, 8 GB, Asus Nvidia 210 silent, Linksys WMP600N, Plugable USB-BT4LE Bluetooth 4.0 Adapter, lecteur multicarte Addonics AEIDDSAU, HP LaserJet 1220
- Davide_01
- Utente junior
- Posts: 32
- Joined: 17 January 2008, 14:44
- ROSA: Desktop 2012
- OpenMandriva: Lx 2013.0
- Kernel: 3.11.6-nrjQL
- Desktop: KDE4
- country: ITALY
- Location: Genova
- Contact:
Re: ROSA 2012.1 private beta2 nrj & nrjQL ISOs for testing..
Hi, here it is a little report about the installation:
Start installation from DVD
Installed on external HD by E-sata connection
Installation OK (as usual)
Boot OK
Check on boot.log : I found few error, the only one relevant is the following
[FAILED] Failed to start Apply Kernel Variables.
look at dmesg I found some error about powernow support and microcode
[ 17.511525] powernow-k8: Core Performance Boosting: on.
[ 17.511535] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[Firmware Bug]: powernow-k8: Try again with latest BIOS.
[ 17.531849] microcode: CPU0: patch_level=0x010000bf
[ 17.613828] microcode: CPU0: new patch_level=0x010000dc
[ 17.613837] microcode: CPU1: patch_level=0x010000bf
[ 17.614276] microcode: CPU1: new patch_level=0x010000dc
[ 17.614285] microcode: CPU2: patch_level=0x010000bf
[ 17.614626] microcode: CPU2: new patch_level=0x010000dc
[ 17.614634] microcode: CPU3: patch_level=0x010000bf
[ 17.615030] microcode: CPU3: new patch_level=0x010000dc
[ 17.615039] microcode: CPU4: patch_level=0x010000bf
[ 17.615343] microcode: CPU4: new patch_level=0x010000dc
[ 17.615351] microcode: CPU5: patch_level=0x010000bf
[ 17.616378] microcode: CPU5: new patch_level=0x010000dc
[ 17.616432] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
anyway :
System :OK
Boot : very fast
responce to use :fast
Add repository OK
Nvidia (304.64) driver installation
Building module:OK
Installing to /lib/modules/3.6.6-nrjQL-desktop-69rosa/dkms/drivers/video/ OK
FXdrake by konsole (It has produced a little system freeze to the first launch, and ask a wrong user password also after the change of mandriva tool autentification. Task-X11 package avoid to start FXdrake from MCC (to check)
Simplewelcome : It seams always better, I like horizontal scrolling but would be better to maintain a clear separation from different application group, I like to be able to merge many icons in the same place/folder.
Now I'm installing a lot of program Digicam devede yakuake kicad hplip-gui gimp etc
Thank you
few note about my hardware:
M5A97 PRO
AMD Phenom(tm) II X6 1055T Processor
RAM DDR3 8G
GT218 [GeForce 210]
Ciao
Start installation from DVD
Installed on external HD by E-sata connection
Installation OK (as usual)
Boot OK
Check on boot.log : I found few error, the only one relevant is the following
[FAILED] Failed to start Apply Kernel Variables.
look at dmesg I found some error about powernow support and microcode
[ 17.511525] powernow-k8: Core Performance Boosting: on.
[ 17.511535] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[Firmware Bug]: powernow-k8: Try again with latest BIOS.
[ 17.531849] microcode: CPU0: patch_level=0x010000bf
[ 17.613828] microcode: CPU0: new patch_level=0x010000dc
[ 17.613837] microcode: CPU1: patch_level=0x010000bf
[ 17.614276] microcode: CPU1: new patch_level=0x010000dc
[ 17.614285] microcode: CPU2: patch_level=0x010000bf
[ 17.614626] microcode: CPU2: new patch_level=0x010000dc
[ 17.614634] microcode: CPU3: patch_level=0x010000bf
[ 17.615030] microcode: CPU3: new patch_level=0x010000dc
[ 17.615039] microcode: CPU4: patch_level=0x010000bf
[ 17.615343] microcode: CPU4: new patch_level=0x010000dc
[ 17.615351] microcode: CPU5: patch_level=0x010000bf
[ 17.616378] microcode: CPU5: new patch_level=0x010000dc
[ 17.616432] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
anyway :
System :OK
Boot : very fast
responce to use :fast
Add repository OK
Nvidia (304.64) driver installation
Building module:OK
Installing to /lib/modules/3.6.6-nrjQL-desktop-69rosa/dkms/drivers/video/ OK
FXdrake by konsole (It has produced a little system freeze to the first launch, and ask a wrong user password also after the change of mandriva tool autentification. Task-X11 package avoid to start FXdrake from MCC (to check)
Simplewelcome : It seams always better, I like horizontal scrolling but would be better to maintain a clear separation from different application group, I like to be able to merge many icons in the same place/folder.
Now I'm installing a lot of program Digicam devede yakuake kicad hplip-gui gimp etc
Thank you
few note about my hardware:
M5A97 PRO
AMD Phenom(tm) II X6 1055T Processor
RAM DDR3 8G
GT218 [GeForce 210]
Ciao
Davide_01
http://www.linux-corner.it
http://www.linux-corner.it
Re: ROSA 2012.1 private beta2 nrj & nrjQL ISOs for testing..
Some serious problems still found in Beta2, after yesterday installation
Nvidia or XFdrake?
Nvidia proprietary drivers 304.64,
download ok, install ok, reboot ok, then
[OK] Reaching target Graphical Interface...
it freeze there forever, in all PCs I have tried
Main cups files are present out of the box
so CUPS seems started and working...
but when you connect a printer
no printer is detected even if disconnect/connect
I've tried also TurboPrint (licensed), but nothing to do,
the printer is not detected at all (Epson Stylus D88)
The icon size and the spacing of the predefined programs is wrong,
I mean the icons right after the ROSA Start button,
there is also something wrong with the size or the height of the bar
Skype vs TeamViewer
libxfixes3 / lib64xfixes3 - seems like overlapping some files?
Problem in 64bit arch: programs 1>Skype 2> TeamViewer
If you need to install Teamviewer, you can download from site
and install, bypassing the wrong dependencies requests, I used
urpmi teamviewer_linux.rpm --allow-force
or
rpm -Uvh --nodeps teamviewer_linux.rpm
after TeamVIewer is installed, you need to install wine (wine32),
so you need to add the 32bit repositories, in compatibility mode
urpmi wine32
this step install some dozens dependencies from 32bit architecture
I have had never problems in more than 5 years with this solution...
after I install wine, if I start Teamviewer, it starts as expected
and is working very fine,
but If I try to start Skype, it does not start anymore
Skype error:
"/usr/share/skype/skype symbol lookup error:
/usr/lib/libXfises.so.3 undefined symbol: _XGetRequest"
the problem is with something added with the libxfixes.so.3
this was installed by wine32
I try to uninstall this lib, but it would have removed all wine32
so I tried to force its removing with rpm -e --nodeps
and I have the confirm that without libxfixes, Skype works again
but if I try starting TeamViewer I receive an error
Teamviewer error:
"TV could not load Gnu/Linux extension shared library tvwine.dll.so"
Alternatively removing the 32bit installing the 64bit, or removing the 64bit installing the 32bit
I used to force uninstall of 32bit, or 64bit, of this lib, to have working or skype or teamviewer
# rpm --nodeps -e libxfixes3-5.0-4-rosa2012.1.i586
# urpmi lib64xfixes3
Skype WORKS - TeamViewer NOT
# rpm -e --nodeps lib64xfixes3-5.0-4-rosa2012.1.x86_64
# urpmi libxfixes3
Skype does NOT work - TeamViewer WORKS
and so perhaps
there should be some error in this lib, some conflicting file
from the 32bit lib, overlapping with the 64bit lib contents...
Many people use TeamViewer and Skype concurrently
since MDV 2010 up to RM2012 they have worked without a problem
bye, NicCo
Nvidia or XFdrake?
Nvidia proprietary drivers 304.64,
download ok, install ok, reboot ok, then
[OK] Reaching target Graphical Interface...
it freeze there forever, in all PCs I have tried
Printer system KO?Alexander Kazancev answer > wrote:For Nvidia STRONGLY need using XFdrake. Without add nokmsboot in grub kernel line it's not working...
Also please check properly change alternatives:
After install drivers run (from root)
update-alternatives --config gl_conf
and set 2 (/etc/nvidia-current/ld.so.conf)
UPDATE: with Nvida I've found the error - update-alternatives not updates with select proprietary driver
Main cups files are present out of the box
so CUPS seems started and working...
but when you connect a printer
no printer is detected even if disconnect/connect
I've tried also TurboPrint (licensed), but nothing to do,
the printer is not detected at all (Epson Stylus D88)
Rocket barAlexander Kazancev answer > wrote:Printer autodetect disabled (such droped in upstream) and you need use system-config-printer to setup it.
Also you need run cups... (it will be done soon in system-config-printer).
The icon size and the spacing of the predefined programs is wrong,
I mean the icons right after the ROSA Start button,
there is also something wrong with the size or the height of the bar
Skype vs TeamViewer
libxfixes3 / lib64xfixes3 - seems like overlapping some files?
Problem in 64bit arch: programs 1>Skype 2> TeamViewer
If you need to install Teamviewer, you can download from site
and install, bypassing the wrong dependencies requests, I used
urpmi teamviewer_linux.rpm --allow-force
or
rpm -Uvh --nodeps teamviewer_linux.rpm
after TeamVIewer is installed, you need to install wine (wine32),
so you need to add the 32bit repositories, in compatibility mode
urpmi wine32
this step install some dozens dependencies from 32bit architecture
I have had never problems in more than 5 years with this solution...
after I install wine, if I start Teamviewer, it starts as expected
and is working very fine,
but If I try to start Skype, it does not start anymore
Skype error:
"/usr/share/skype/skype symbol lookup error:
/usr/lib/libXfises.so.3 undefined symbol: _XGetRequest"
the problem is with something added with the libxfixes.so.3
this was installed by wine32
I try to uninstall this lib, but it would have removed all wine32
so I tried to force its removing with rpm -e --nodeps
and I have the confirm that without libxfixes, Skype works again
but if I try starting TeamViewer I receive an error
Teamviewer error:
"TV could not load Gnu/Linux extension shared library tvwine.dll.so"
Alternatively removing the 32bit installing the 64bit, or removing the 64bit installing the 32bit
I used to force uninstall of 32bit, or 64bit, of this lib, to have working or skype or teamviewer
# rpm --nodeps -e libxfixes3-5.0-4-rosa2012.1.i586
# urpmi lib64xfixes3
Skype WORKS - TeamViewer NOT
# rpm -e --nodeps lib64xfixes3-5.0-4-rosa2012.1.x86_64
# urpmi libxfixes3
Skype does NOT work - TeamViewer WORKS
and so perhaps
there should be some error in this lib, some conflicting file
from the 32bit lib, overlapping with the 64bit lib contents...
Many people use TeamViewer and Skype concurrently
since MDV 2010 up to RM2012 they have worked without a problem
bye, NicCo
.
--- Professional experience ---
Kernel designer, engineer, maintainer and tester for ROSA Desktop and OpenMandriva Lx O.S.
--- currently I'm playing with ---
LTS Kernels > Linux 4.1.12-nrjQL <<< Linux 3.18.17-nrjQL <<< Linux 3.14.46-nrjQL
EOL Kernels > Linux 3.19.8-nrjQL <<< Linux 3.17.8-nrjQL <<< Linux 3.15.10-nrjQL
--- Professional experience ---
Kernel designer, engineer, maintainer and tester for ROSA Desktop and OpenMandriva Lx O.S.
--- currently I'm playing with ---
LTS Kernels > Linux 4.1.12-nrjQL <<< Linux 3.18.17-nrjQL <<< Linux 3.14.46-nrjQL
EOL Kernels > Linux 3.19.8-nrjQL <<< Linux 3.17.8-nrjQL <<< Linux 3.15.10-nrjQL
- promeneur
- Utente senior
- Posts: 547
- Joined: 6 February 2009, 17:47
- ROSA: -
- OpenMandriva: 2010.3 i586
- Kernel: 3.5.7 nrj dsktp pae
- Desktop: MIB kde 4.8.4
- country: France
Re: ROSA 2012.1 private beta2 nrj & nrjQL ISOs for testing..
for skype
it's time to use 4 version
i installed it with my 2010.2 using getskype from rosa lts
it works well
i note this with mandriva 2010.3 i586 :
if i use kopete and skype then video in skype does not work
if i use only skype
- if skype is launched when kde opens a session then video does not work
- if i launch skype 2 mn after kde opens a session then video works !
it's time to use 4 version
i installed it with my 2010.2 using getskype from rosa lts
it works well
i note this with mandriva 2010.3 i586 :
if i use kopete and skype then video in skype does not work
if i use only skype
- if skype is launched when kde opens a session then video does not work
- if i launch skype 2 mn after kde opens a session then video works !
Asus M2N, AMD Athlon 64 X2 5000+, 8 GB, Asus Nvidia 210 silent, Linksys WMP600N, Plugable USB-BT4LE Bluetooth 4.0 Adapter, lecteur multicarte Addonics AEIDDSAU, HP LaserJet 1220