Kernel-rtQL 3.8.13 -rt10 -rt14 for ROSA2012 2012.1 OM cooker
- rolf
- Utente
- Posts: 112
- Joined: 20 May 2009, 3:15
- ROSA: R3 2012.1 x86_64
- OpenMandriva: OMV 2014.0 x86_64
- Kernel: 3.13.11-nrjQL-realti
- Desktop: KDE 4.13.2
- country: USA
Re: Kernel rtQL 3.8.13 for ROSA2012 2012.1, MDV2010/11 cooke
Yes, maybe later...
Re: Kernel rtQL 3.8.13 for ROSA2012 2012.1, MDV2010/11 cooke
Kernel rtQL version 3.8.13 with -rt10 patch and the TOI full enabled
Already sent to ABF, in less than two hours the RPMS should be available:
Builds in progress >>> https://abf.rosalinux.ru/kernels_38x/Ke ... uild_lists
I recommend, especially to GvM and Mario Moles, to install it ASAP,
start their testing to send feedback about, now is important to know:
- from GvM > if vmware issue has been fixed, (works like rt8?),
you may test also the jack qjackd, pulseaudio, stressing the audio zone
- from Mario > the behaviour with jackd, qjackd, pulseaudio, ecc.
with all your used music applications
- in general > if the TOI add and enabling does not add any regression
test the toi suspend / hybernation functions with this kernel, please...
Having all these 3 versions, is usefull only because help us to check and verify better
all the progresses and eventual regressions, from the latest versions -rt8 to upto -rt10
i.e.lately has been reported by GvM that rt9 had a regression with a module of vmware
we hope that this newest -rt10 is working well for vmware vms and for everything else...
POST EDIT > UPDATE: all RPMS for 3.8.13 rt10.rtQL1 are available for download & install
bye, NicCo
Already sent to ABF, in less than two hours the RPMS should be available:
Builds in progress >>> https://abf.rosalinux.ru/kernels_38x/Ke ... uild_lists
I recommend, especially to GvM and Mario Moles, to install it ASAP,
start their testing to send feedback about, now is important to know:
- from GvM > if vmware issue has been fixed, (works like rt8?),
you may test also the jack qjackd, pulseaudio, stressing the audio zone
- from Mario > the behaviour with jackd, qjackd, pulseaudio, ecc.
with all your used music applications
- in general > if the TOI add and enabling does not add any regression
test the toi suspend / hybernation functions with this kernel, please...
Code: Select all
%changelog
* Sat Jun 01 2013 Nicolo' Costanza <abitrules@yahoo.it> 3.8.13-rt10.rtQL1
+ kernel 3.8.13 (EOL) - update to rt10 plus rtQL1
- enabled TOI / added the TOI (Tux on Linux) full set of config keys
- ---------------------------------------------------------------------
- Kernel 3.8 for mdv 2010.2, 2011.0, cooker, rosa.lts2012.0, rosa2012.1
- MIB (Mandriva International Backports) - http://mib.pianetalinux.org/
- This kernel contains also some other patches to improve the hw support
- ---------------------------------------------------------------------
Code: Select all
CONFIG_TOI_FILE=y
CONFIG_TOI_SWAP=y
CONFIG_TOI_CRYPTO=y
CONFIG_TOI_USERUI=y
CONFIG_TOI_USERUI_DEFAULT_PATH="/usr/local/sbin/tuxonice_fbsplash"
CONFIG_TOI_DEFAULT_IMAGE_SIZE_LIMIT=-2
# CONFIG_TOI_KEEP_IMAGE is not set
CONFIG_TOI_REPLACE_SWSUSP=y
# CONFIG_TOI_IGNORE_LATE_INITCALL is not set
CONFIG_TOI_DEFAULT_WAIT=25
CONFIG_TOI_DEFAULT_EXTRA_PAGES_ALLOWANCE=500
# CONFIG_TOI_CHECKSUM is not set
CONFIG_TOI=y
CONFIG_TOI_ZRAM_SUPPORT=y
all the progresses and eventual regressions, from the latest versions -rt8 to upto -rt10
i.e.lately has been reported by GvM that rt9 had a regression with a module of vmware
we hope that this newest -rt10 is working well for vmware vms and for everything else...
POST EDIT > UPDATE: all RPMS for 3.8.13 rt10.rtQL1 are available for download & install
Code: Select all
Packages: these are file list for ROSA Fresh 2012.1 - x86_64
Fullname Name Version Release
-----------------------------------------------------------------
kernel-rtQL-3.8.13-rt10.rtQL1.src.rpm
kernel-rtQL-3.8.13-rt10.rtQL1rosa-1-1-rosa2012.1.x86_64.rpm
kernel-rtQL-devel-3.8.13-rt10.rtQL1rosa-1-1-rosa2012.1.x86_64.rpm
kernel-rtQL-devel-latest-3.8.13-rt10.rtQL1-rosa2012.1.x86_64.rpm
kernel-rtQL-doc-3.8.13-rt10.rtQL1-rosa2012.1.noarch.rpm
kernel-rtQL-latest-3.8.13-rt10.rtQL1-rosa2012.1.x86_64.rpm
kernel-rtQL-source-3.8.13-rt10.rtQL1rosa-1-1-rosa2012.1.noarch.rpm
kernel-rtQL-source-latest-3.8.13-rt10.rtQL1-rosa2012.1.noarch.rpm
.
--- Professional experience ---
Kernel designer, engineer, maintainer and tester for ROSA Desktop and OpenMandriva Lx O.S.
--- currently I'm playing with ---
LTS Kernels > Linux 4.1.12-nrjQL <<< Linux 3.18.17-nrjQL <<< Linux 3.14.46-nrjQL
EOL Kernels > Linux 3.19.8-nrjQL <<< Linux 3.17.8-nrjQL <<< Linux 3.15.10-nrjQL
--- Professional experience ---
Kernel designer, engineer, maintainer and tester for ROSA Desktop and OpenMandriva Lx O.S.
--- currently I'm playing with ---
LTS Kernels > Linux 4.1.12-nrjQL <<< Linux 3.18.17-nrjQL <<< Linux 3.14.46-nrjQL
EOL Kernels > Linux 3.19.8-nrjQL <<< Linux 3.17.8-nrjQL <<< Linux 3.15.10-nrjQL
- GvMariani
- Collaboratore
- Posts: 610
- Joined: 27 July 2009, 11:31
- ROSA: 2016.1 Fresh R10
- OpenMandriva: -
- Kernel: 4.19.13-nrj-desktop
- Desktop: Plasma 5
- country: Italy
- Location: Cologno Monzese (MI) - Italia
Re: Kernel rtQL 3.8.13 for ROSA2012 2012.1, MDV2010/11 cooke
Sorry, still the same thing here: "failed to setup build environment" from vmware-modconfig and consequently no working vmware modules...NicCo wrote:Kernel rtQL version 3.8.13 with -rt10 patch and the TOI full enabled
I recommend, especially to GvM and Mario Moles, to install it ASAP,
start their testing to send feedback about, now is important to know:
- from GvM > if vmware issue has been fixed, (works like rt8?),
you may test also the jack qjackd, pulseaudio, stressing the audio zone
The last time we saw a such error was when version.h was displaced (in include/uapi/generated/linux, from include/linux) so I suspect something similar here, but cannot guess what is changed from -rt8 and -rt9/10...
GvM
Re: Kernel-rtQL 3.8.13-rt10 for ROSA2012 2012.1, mdv10/11 co
Can you try informing rt buzilla about the problem with vmware:GvMariani wrote: Sorry, still the same thing here: "failed to setup build environment" from vmware-modconfig and consequently no working vmware modules...
The last time we saw a such error was when version.h was displaced (in include/uapi/generated/linux, from include/linux) so I suspect something similar here, but cannot guess what is changed from -rt8 and -rt9/10...
even if they dont accept fix requests for proprietary software...
at least, they should know...
.
--- Professional experience ---
Kernel designer, engineer, maintainer and tester for ROSA Desktop and OpenMandriva Lx O.S.
--- currently I'm playing with ---
LTS Kernels > Linux 4.1.12-nrjQL <<< Linux 3.18.17-nrjQL <<< Linux 3.14.46-nrjQL
EOL Kernels > Linux 3.19.8-nrjQL <<< Linux 3.17.8-nrjQL <<< Linux 3.15.10-nrjQL
--- Professional experience ---
Kernel designer, engineer, maintainer and tester for ROSA Desktop and OpenMandriva Lx O.S.
--- currently I'm playing with ---
LTS Kernels > Linux 4.1.12-nrjQL <<< Linux 3.18.17-nrjQL <<< Linux 3.14.46-nrjQL
EOL Kernels > Linux 3.19.8-nrjQL <<< Linux 3.17.8-nrjQL <<< Linux 3.15.10-nrjQL
- oiram73
- Utente senior
- Posts: 405
- Joined: 5 January 2009, 13:33
- ROSA: -
- OpenMandriva: 2014
- Kernel: 3.19.8-nrjQL-realtim
- Desktop: KDE 4.14.3
- country: Italia
- Location: Perugia
- Contact:
Re: Kernel-rtQL 3.8.13-rt10 for ROSA2012 2012.1, mdv10/11 co
Code: Select all
[mario@localhost ~]$ uname -a
Linux localhost.localdomain 3.8.13-rt10.rtQL1rosa #1 SMP PREEMPT RT Sat Jun 1 13:47:30 MSK 2013 x86_64 x86_64 x86_64 GNU/Linux
[mario@localhost ~]$
I hope it's about Nicco!
Unfortunately pulseaudio still crashes after a few minutes!
0 xruns!
The temperrature remain low even at the same time using amarok, youtube with pulseaudio, rosegarden!
Even the use of the ram is good!
If it were not for the crashes pulseaudio this would be the best kernel ever!
OMA-2014
oiram/bin/selom
Da ognuno secondo le proprie capacità ad ognuno secondo i propri bisogni!
oiram/bin/selom
Da ognuno secondo le proprie capacità ad ognuno secondo i propri bisogni!
Re: Kernel-rtQL 3.8.13-rt10 for ROSA2012 2012.1, mdv10/11 co
I tried to install on a powerfull laptop of one friend of mine (below you can read all the data about):
after te first reboot I tried to launch the VMWare VMs and I found none issues, all worked very fine,
none problems building Nvidia current drivers, that worked atter the fisrt reboot without any issue,
and I seem having none problems with the pulseaudio stuff (I mean, with my usual PC activity...)
after te first reboot I tried to launch the VMWare VMs and I found none issues, all worked very fine,
none problems building Nvidia current drivers, that worked atter the fisrt reboot without any issue,
and I seem having none problems with the pulseaudio stuff (I mean, with my usual PC activity...)
Code: Select all
[utente@localhost ~]$ inxi -F
System: Host: localhost.localdomain Kernel: 3.8.13-rt10.rtQL1rosa x86_64 (64 bit)
Desktop KDE 4.10.3 Distro: RosaDesktop.Fresh 2012.1 belka
Machine: System: Dell product: Precision M6600 version: 01
Mobo: Dell model: 04YY4M version: A00 Bios: Dell version: A12 date: 08/09/2012
CPU: Quad core Intel Core i7-2820QM CPU (-HT-MCP-) cache: 8192 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx)
Clock Speeds: 1: 800.00 MHz 2: 800.00 MHz 3: 800.00 MHz 4: 800.00 MHz 5: 800.00 MHz 6: 800.00 MHz 7: 2301.00 MHz 8: 800.00 MHz
Graphics: Card: NVIDIA GF104 [Quadro 3000M] X.Org: 1.13.3 drivers: nvidia,v4l Resolution: 1920x1080@60.0hz
GLX Renderer: Quadro 3000M/PCIe/SSE2 GLX Version: 4.3.0 NVIDIA 319.17
Audio: Card-1: NVIDIA GF104 High Definition Audio Controller driver: snd_hda_intel
Card-2: Intel 6 Series/C200 Series Chipset Family High Definition Audio Controller driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture ver: k3.8.13-rt10.rtQL1rosa
Network: Card-1: Intel Centrino Ultimate-N 6300 driver: iwlwifi
IF: wlan0 state: down mac: 24:77:03:45:e5:90
Card-2: Intel 82579LM Gigabit Network Connection driver: e1000e
IF: eth0 state: up speed: 100 Mbps duplex: full mac: d0:67:e5:41:81:87
Drives: HDD Total Size: 750.2GB (36.0% used) 1: /dev/sda ST9750420AS 750.2GB
Partition: ID: / size: 40G used: 6.8G (19%) fs: rootfs ID: / size: 40G used: 6.8G (19%) fs: ext4
ID: /home size: 315G used: 106G (34%) fs: ext4 ID: swap-1 size: 21.48GB used: 0.00GB (0%) fs: swap
Sensors: System Temperatures: cpu: 25.0C mobo: N/A gpu: 57C
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 278 Uptime: 19 min Memory: 1717.0/16037.5MB Client: Shell inxi: 1.7.24
[utente@localhost ~]$
.
--- Professional experience ---
Kernel designer, engineer, maintainer and tester for ROSA Desktop and OpenMandriva Lx O.S.
--- currently I'm playing with ---
LTS Kernels > Linux 4.1.12-nrjQL <<< Linux 3.18.17-nrjQL <<< Linux 3.14.46-nrjQL
EOL Kernels > Linux 3.19.8-nrjQL <<< Linux 3.17.8-nrjQL <<< Linux 3.15.10-nrjQL
--- Professional experience ---
Kernel designer, engineer, maintainer and tester for ROSA Desktop and OpenMandriva Lx O.S.
--- currently I'm playing with ---
LTS Kernels > Linux 4.1.12-nrjQL <<< Linux 3.18.17-nrjQL <<< Linux 3.14.46-nrjQL
EOL Kernels > Linux 3.19.8-nrjQL <<< Linux 3.17.8-nrjQL <<< Linux 3.15.10-nrjQL
Re: Kernel-rtQL 3.8.13-rt10 for ROSA2012 2012.1, mdv10/11 co
UPDATE! > rt10-rtQL2
New release version for kernel 3.8.13, it's the 2th release and can be considered a fix version:
this contain some improvments, a few fixes, and some features requested by our Community
To check the build status from ABF (in realtime)
https://abf.rosalinux.ru/kernels_38x/Ke ... uild_lists
As usual, all packages can be find in the proper repo
http://abf-downloads.rosalinux.ru/kerne ... epository/
bye, NicCo
New release version for kernel 3.8.13, it's the 2th release and can be considered a fix version:
this contain some improvments, a few fixes, and some features requested by our Community
To check the build status from ABF (in realtime)
https://abf.rosalinux.ru/kernels_38x/Ke ... uild_lists
As usual, all packages can be find in the proper repo
http://abf-downloads.rosalinux.ru/kerne ... epository/
Alexander Burmashev wrote:I'm very interested to the new just added patch:
- scsi_storvsc_avoid-usage-of-WRITE_SAME.patch
That's particularly very important for me.
Actually, ROSA installation on Hyper-V machines may be blocked by a bug, and this patch should fix!
I guess it is not so critical for cooker, since it may be used 3.9 kernels ( where it is fixed upstream ).
Code: Select all
%changelog
* Fri Jun 14 2013 Nicolo' Costanza <abitrules@yahoo.it> 3.8.13-rt10.rtQL2
+ kernel 3.8.13 (EOL) - update to rt10 plus rtQL2
- add patch > rtQL_12-scsi_storvsc_avoid-usage-of-WRITE_SAME.patch:
* that fix the installation on Hyper-V machines
- We've received some good suggestions, and all have been accepted
- 1> suggestions and requests received by Per Øyvind Karlsen (POK)
* CONFIG_PM_AUTOSLEEP=y (feature to be tested if does not harm)
* CONFIG_SFI=y
* CONFIG_BLK_DEV_DRBD=m
* # CONFIG_DRBD_FAULT_INJECTION is not set
* CONFIG_HW_RANDOM_TIMERIOMEM=m
* CONFIG_DRM_VIA=m
* CONFIG_FB_ATY128_BACKLIGHT=y
* CONFIG_USB_RIO500=m
* CONFIG_DRM_VMWGFX_FBCON=y
* CONFIG_SND_PCSP=m
* CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0 (=10 will be tested in future)
* CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0 (=10 will be tested in future)
- 2> suggestions from an advanced user to A.Burmashev
* CONFIG_TCP_CONG_ADVANCED=y
* CONFIG_TCP_CONG_BIC=m
* CONFIG_TCP_CONG_CUBIC=y
* CONFIG_TCP_CONG_WESTWOOD=m
* CONFIG_TCP_CONG_HTCP=m
* CONFIG_TCP_CONG_HSTCP=m
* CONFIG_TCP_CONG_HYBLA=m
* CONFIG_TCP_CONG_VEGAS=m
* CONFIG_TCP_CONG_SCALABLE=m
* CONFIG_TCP_CONG_LP=m
* CONFIG_TCP_CONG_VENO=m
* CONFIG_TCP_CONG_YEAH=m
* CONFIG_TCP_CONG_ILLINOIS=m
* CONFIG_DEFAULT_CUBIC=y
* # CONFIG_DEFAULT_RENO is not set
- ---------------------------------------------------------------------
- Kernel 3.8 for mdv 2010.2, 2011.0, cooker, rosa.lts2012.0, rosa2012.1
- MIB (Mandriva International Backports) - http://mib.pianetalinux.org/
- This kernel contains also some other patches to improve the hw support
- ---------------------------------------------------------------------
.
--- Professional experience ---
Kernel designer, engineer, maintainer and tester for ROSA Desktop and OpenMandriva Lx O.S.
--- currently I'm playing with ---
LTS Kernels > Linux 4.1.12-nrjQL <<< Linux 3.18.17-nrjQL <<< Linux 3.14.46-nrjQL
EOL Kernels > Linux 3.19.8-nrjQL <<< Linux 3.17.8-nrjQL <<< Linux 3.15.10-nrjQL
--- Professional experience ---
Kernel designer, engineer, maintainer and tester for ROSA Desktop and OpenMandriva Lx O.S.
--- currently I'm playing with ---
LTS Kernels > Linux 4.1.12-nrjQL <<< Linux 3.18.17-nrjQL <<< Linux 3.14.46-nrjQL
EOL Kernels > Linux 3.19.8-nrjQL <<< Linux 3.17.8-nrjQL <<< Linux 3.15.10-nrjQL
Kernel-rtQL 3.8.13 -rt10 -rt11 for ROSA2012 2012.1 OM cooker
When an OS must go beyond the actual paradigms...
Kernel rtQL (rt + nrjQL) description, targets and goals
Kernel rtQL (rt + nrjQL) description, targets and goals
UPDATE! > rt11-rtQL1
New version of kernel-rtQL3.8.13, this time with the latest -rt11 patch
for a " ROSA RTOS "... > http://en.wikipedia.org/wiki/Real-time_operating_system
Kernel-rtQL 3.8.13 with -rt11 and ROSA -rtQL patches for ROSA Marathon 2012.0, ROSA Fresh 2012.1 and OM cooker
DOWNLOAD:
Build status > https://abf.rosalinux.ru/kernels_38x/Ke ... uild_lists
As usual, all packages can be find in kernels 3.8 repo
http://abf-downloads.rosalinux.ru/kerne ... epository/
If you have enabled the kernel 3.8 repo, fro your Distro/Arch, you can install easily:
Code: Select all
urpmi kernel-rtQL-devel-latest kernel-rtQL-latest
Code: Select all
%changelog
* Sat Jun 15 2013 Nicolo' Costanza <abitrules@yahoo.it> 3.8.13-rt11.rtQL1
+ kernel 3.8.13 (EOL) - update to rt11 plus rtQL1
- update patch > rtQL_05-tuxonice-for-linux-3.8-13-2013-05-12.patch
- fix > TOI now should be properly conf/enabled > CONFIG_TOI_CORE=y
- ---------------------------------------------------------------------
- Kernel 3.8 for mdv 2010.2, 2011.0, cooker, rosa.lts2012.0, rosa2012.1
- MIB (Mandriva International Backports) - http://mib.pianetalinux.org/
- This kernel contains also some other patches to improve the hw support
- ---------------------------------------------------------------------
* Fri Jun 14 2013 Nicolo' Costanza <abitrules@yahoo.it> 3.8.13-rt10.rtQL2
+ kernel 3.8.13 (EOL) - update to rt10 plus rtQL2
- add patch > rtQL_12-scsi_storvsc_avoid-usage-of-WRITE_SAME.patch:
* that's a fix for the proper installation on Hyper-V machines
- We've received some good suggestions, and all have been accepted
- 1> suggestions and requests received by Per Øyvind Karlsen (POK)
* CONFIG_PM_AUTOSLEEP=y (feature to be tested if does not harm)
* CONFIG_SFI=y
* CONFIG_BLK_DEV_DRBD=m
* # CONFIG_DRBD_FAULT_INJECTION is not set
* CONFIG_HW_RANDOM_TIMERIOMEM=m
* CONFIG_DRM_VIA=m
* CONFIG_FB_ATY128_BACKLIGHT=y
* CONFIG_USB_RIO500=m
* CONFIG_DRM_VMWGFX_FBCON=y
* CONFIG_SND_PCSP=m
* CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0 (=10 will be tested in future)
* CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0 (=10 will be tested in future)
- 2> suggestions from an advanced user to A.Burmashev
* CONFIG_TCP_CONG_ADVANCED=y
* CONFIG_TCP_CONG_BIC=m
* CONFIG_TCP_CONG_CUBIC=y
* CONFIG_TCP_CONG_WESTWOOD=m
* CONFIG_TCP_CONG_HTCP=m
* CONFIG_TCP_CONG_HSTCP=m
* CONFIG_TCP_CONG_HYBLA=m
* CONFIG_TCP_CONG_VEGAS=m
* CONFIG_TCP_CONG_SCALABLE=m
* CONFIG_TCP_CONG_LP=m
* CONFIG_TCP_CONG_VENO=m
* CONFIG_TCP_CONG_YEAH=m
* CONFIG_TCP_CONG_ILLINOIS=m
* CONFIG_DEFAULT_CUBIC=y
* # CONFIG_DEFAULT_RENO is not set
- ---------------------------------------------------------------------
- Kernel 3.8 for mdv 2010.2, 2011.0, cooker, rosa.lts2012.0, rosa2012.1
- MIB (Mandriva International Backports) - http://mib.pianetalinux.org/
- This kernel contains also some other patches to improve the hw support
- ---------------------------------------------------------------------
* Sat Jun 01 2013 Nicolo' Costanza <abitrules@yahoo.it> 3.8.13-rt10.rtQL1
+ kernel 3.8.13 (EOL) - update to rt10 plus rtQL1
- enabled TOI / added the TOI (Tux on Linux) full set of config keys
- ---------------------------------------------------------------------
- Kernel 3.8 for mdv 2010.2, 2011.0, cooker, rosa.lts2012.0, rosa2012.1
- MIB (Mandriva International Backports) - http://mib.pianetalinux.org/
- This kernel contains also some other patches to improve the hw support
- ---------------------------------------------------------------------
* Sun May 26 2013 Nicolo' Costanza <abitrules@yahoo.it> 3.8.13-rt9.rtQL1
+ kernel 3.8.13 (EOL) - update to rt9 plus rtQL1
- replaced old -rt8 patch for 3.8.11 with newest -rt9 patch for 3.8.13
- ---------------------------------------------------------------------
- Kernel 3.8 for mdv 2010.2, 2011.0, cooker, rosa.lts2012.0, rosa2012.1
- MIB (Mandriva International Backports) - http://mib.pianetalinux.org/
- This kernel contains also some other patches to improve the hw support
- ---------------------------------------------------------------------
* Sat May 25 2013 Nicolo' Costanza <abitrules@yahoo.it> 3.8.13-rt8.rtQL1
+ kernel 3.8.13 (EOL) - rt8 plus rtQL1
- that's the first release with the kernel-rt 3.8.13 with rt8 & nrjQL:
- experimental new rtQL with CK1, BFQ, TOI, UKSM, AUFS3, for ROSA & OMA
- ---------------------------------------------------------------------
- Kernel 3.8 for mdv 2010.2, 2011.0, cooker, rosa.lts2012.0, rosa2012.1
- MIB (Mandriva International Backports) - http://mib.pianetalinux.org/
- This kernel contains also some other patches to improve the hw support
.
--- Professional experience ---
Kernel designer, engineer, maintainer and tester for ROSA Desktop and OpenMandriva Lx O.S.
--- currently I'm playing with ---
LTS Kernels > Linux 4.1.12-nrjQL <<< Linux 3.18.17-nrjQL <<< Linux 3.14.46-nrjQL
EOL Kernels > Linux 3.19.8-nrjQL <<< Linux 3.17.8-nrjQL <<< Linux 3.15.10-nrjQL
--- Professional experience ---
Kernel designer, engineer, maintainer and tester for ROSA Desktop and OpenMandriva Lx O.S.
--- currently I'm playing with ---
LTS Kernels > Linux 4.1.12-nrjQL <<< Linux 3.18.17-nrjQL <<< Linux 3.14.46-nrjQL
EOL Kernels > Linux 3.19.8-nrjQL <<< Linux 3.17.8-nrjQL <<< Linux 3.15.10-nrjQL
Re: Kernel-rtQL 3.8.13 -rt10 -rt11 for ROSA2012 2012.1 OM co
My first installation of Kernel rtQL -rt11 rtQL1 : now I'm rebooting to verify is it's ok...
(I had just installed the previous rtQL, so the new rt11 is proposed as an update)
[/size]
After the first reboot, all went OK: below there are some data about my config and status.
My Pc is working very fine , so far so long, none issue to report with using this new kernel...
bye, NicCo
(I had just installed the previous rtQL, so the new rt11 is proposed as an update)
Code: Select all
[root@localhost ~]# urpmi --auto-update
il supporto "main (Desktop2012.1-1)" risulta già aggiornato
il supporto "main updates (Desktop2012.1-2)" risulta già aggiornato
il supporto "contrib (Desktop2012.1-3)" risulta già aggiornato
il supporto "contrib updates (Desktop2012.1-4)" risulta già aggiornato
il supporto "non-free (Desktop2012.1-5)" risulta già aggiornato
il supporto "non-free updates (Desktop2012.1-6)" risulta già aggiornato
il supporto "restricted (Desktop2012.1-7)" risulta già aggiornato
il supporto "restricted updates (Desktop2012.1-8)" risulta già aggiornato
il supporto "MIB-basic_32" risulta già aggiornato
il supporto "MIB-experts_32" risulta già aggiornato
il supporto "KDE_4.10_x32" risulta già aggiornato
http://abf.rosalinux.ru/downloads/kernels_38x_personal/repository/rosa2012.1/i586/main/release/media_info/synthesis.hdlist.cz
supporto "Kernel_38" aggiornato
il supporto "MIB-X14" risulta già aggiornato
I pacchetti make-3.82-5-rosa2012.1.i586, sysfsutils-2.1.0-20-rosa2012.1.i586, glibc-devel-2.15-8-rosa2012.1.i586, bootloader-utils-1.15-9-rosa2012.1.noarch, dracut-027-4-rosa2012.1.i586, perl-5.14.2-8-rosa2012.1.i586, libncurses-devel-5.9-6.20120811.1-rosa2012.1.i586, kmod-9-9-rosa2012.1.i586, kernel-firmware-20130307-69.3-mib2012.1.noarch, gcc-4.7.3_2012.10-3.1-rosa2012.1.i586 sono già installati
Per soddisfare le dipendenze, saranno installati i seguenti pacchetti:
Pacchetto Versione Release Dist DEpoch Arch.
(supporto "Kernel_38")
kernel-rtQL-3.8.13-rt11.rtQL1> 1 1 rosa 2012.1 i586
kernel-rtQL-devel-3.8.13-rt11> 1 1 rosa 2012.1 i586
kernel-rtQL-devel-latest 3.8.13 rt11.rtQL1 rosa 2012.1 i586
kernel-rtQL-latest 3.8.13 rt11.rtQL1 rosa 2012.1 i586
Altri 67MB di spazio disco saranno utilizzati.
verranno scaricati 43MB di pacchetti.
Procedo con l'installazione di 4 pacchetti? (S/n) s
http://abf.rosalinux.ru/downloads/kernels_38x_personal/repository/rosa2012.1/i586/main/release/kernel-rtQL-devel-latest-3.8.13-rt11.rtQL1-rosa2012.1.i586.rpm
http://abf.rosalinux.ru/downloads/kernels_38x_personal/repository/rosa2012.1/i586/main/release/kernel-rtQL-devel-3.8.13-rt11.rtQL1rosa-1-1-rosa2012.1.i586.rpm
http://abf.rosalinux.ru/downloads/kernels_38x_personal/repository/rosa2012.1/i586/main/release/kernel-rtQL-latest-3.8.13-rt11.rtQL1-rosa2012.1.i586.rpm
http://abf.rosalinux.ru/downloads/kernels_38x_personal/repository/rosa2012.1/i586/main/release/kernel-rtQL-3.8.13-rt11.rtQL1rosa-1-1-rosa2012.1.i586.rpm
installazione di kernel-rtQL-devel-3.8.13-rt11.rtQL1rosa-1-1-rosa2012.1.i586.rpm kernel-rtQL-3.8.13-rt11.rtQL1rosa-1-1-rosa2012.1.i586.rpm kernel-rtQL-devel-latest-3.8.13-rt11.rtQL1-rosa2012.1.i586.rpm kernel-rtQL-latest-3.8.13-rt11.rtQL1-rosa2012.1.i586.rpm da /var/cache/urpmi/rpms
In preparazione... #######################################################################
1/4: kernel-rtQL-latest ######################################################################
2/4: kernel-rtQL-devel-latest #################################################################
3/4: kernel-rtQL-devel-3.8.13-rt11.rtQL1rosa ####################################################
4/4: kernel-rtQL-3.8.13-rt11.rtQL1rpm ##########################################################
I: dracut module 'network' will not be installed, because it's in the list to be omitted!
I: dracut module 'aufs-mount' will not be installed, because it's in the list to be omitted!
I: dracut module 'network' will not be installed, because it's in the list to be omitted!
I: dracut module 'aufs-mount' will not be installed, because it's in the list to be omitted!
I: *** Including module: dash ***
I: *** Including module: i18n ***
I: *** Including module: drm ***
I: Omitting driver radeon
I: Omitting driver nouveau
I: *** Including module: plymouth ***
I: *** Including module: kernel-modules ***
I: *** Including module: resume ***
I: *** Including module: rootfs-block ***
I: *** Including module: terminfo ***
I: *** Including module: udev-rules ***
I: *** Including module: usrmount ***
I: *** Including module: base ***
I: *** Including module: fs-lib ***
I: *** Including module: shutdown ***
I: *** Including modules done ***
I: *** Installing kernel module dependencies and firmware ***
I: *** Installing kernel module dependencies and firmware done ***
I: *** Resolving executable dependencies ***
I: *** Resolving executable dependencies done***
I: *** Stripping files ***
I: *** Stripping files done ***
I: *** Creating image file ***
I: *** Creating image file done ***
I: Wrote /boot/initrd-3.8.13-rt11.rtQL1rosa.img:
I: -rw------- 1 root root 4283388 giu 15 14:10 /boot/initrd-3.8.13-rt11.rtQL1rosa.img
Creazione di grub.cfg...
Tema trovato: /boot/grub2/themes/rosa/theme.txt
Trovato sfondo: /boot/grub2/themes/rosa/terminal_background.png
Trovata immagine linux: /boot/vmlinuz-3.8.13-rt11.rtQL1rosa
Trovata immagine initrd: /boot/initrd-3.8.13-rt11.rtQL1rosa.img
Trovata immagine linux: /boot/vmlinuz-3.8.13-rt10.rtQL2rosa
Trovata immagine initrd: /boot/initrd-3.8.13-rt10.rtQL2rosa.img
Trovata immagine linux: /boot/vmlinuz-3.8.13-rt10.rtQL1rosa
Trovata immagine initrd: /boot/initrd-3.8.13-rt10.rtQL1rosa.img
Trovata immagine linux: /boot/vmlinuz-3.8.1-nrj-desktop-1rosa
Trovata immagine initrd: /boot/initrd-3.8.1-nrj-desktop-1rosa.img
Trovata immagine linux: /boot/vmlinuz-3.6.10-nrj-desktop-1rosa
Trovata immagine initrd: /boot/initrd-3.6.10-nrj-desktop-1rosa.img
No volume groups found
Trovato Windows 8 (loader) su /dev/sda1
fatto
Dovresti riavviare il computer per kernel-rtQL-3.8.13-rt11.rtQL1rosa
[root@localhost ~]#
After the first reboot, all went OK: below there are some data about my config and status.
Code: Select all
[utente@localhost ~]$ uname -a
Linux localhost.localdomain 3.8.13-rt11.rtQL1rosa #1 SMP PREEMPT RT Sat Jun 15 15:59:07 MSK 2013 i686 i686 i686 GNU/Linux
[utente@localhost ~]$ inxi -F
System: Host: localhost.localdomain Kernel: 3.8.13-rt11.rtQL1rosa i686 (32 bit)
Desktop KDE 4.10.4 Distro: RosaDesktop.Fresh 2012.1 belka
Machine: System: Hewlett-Packard product: HP Compaq nx7300 (RU389ES#ABZ) version: F.08
Mobo: Hewlett-Packard model: 30A2 version: KBC Version 40.17
Bios: Hewlett-Packard version: 68YGU Ver. F.08 date: 10/23/2006
CPU: Single core Intel Celeron M CPU 430 (-UP-) cache: 1024 KB flags: (nx sse sse2 sse3) clocked at 1729.005 MHz
Graphics: Card: Intel Mobile 945GM/GMS 943/940GML Express Integrated Graphics Controller
X.Org: 1.14.1 drivers: intel (unloaded: fbdev,vesa) Resolution: 1280x800@59.9hz
GLX Renderer: Gallium 0.4 on i915 (chipset GLX Version: 2.1 Mesa 9.1.3
Audio: Card: Intel NM10/ICH7 Family High Definition Audio Controller driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture ver: k3.8.13-rt11.rtQL1rosa
Network: Card-1: Broadcom BCM4401-B0 100Base-TX driver: b44
IF: N/A state: N/A speed: N/A duplex: N/A mac: N/A
Card-2: Broadcom BCM4311 802.11b/g WLAN driver: b43-pci-bridge
IF: N/A state: N/A mac: N/A
Drives: HDD Total Size: 250.1GB (3.7% used) 1: /dev/sda TOSHIBA_MK2555GS 250.1GB
Partition: ID: / size: 20G used: 5.3G (29%) fs: rootfs ID: / size: 20G used: 5.3G (29%) fs: ext4
ID: /home size: 99G used: 3.5G (4%) fs: ext4 ID: swap-1 size: 2.15GB used: 0.00GB (0%) fs: swap
Sensors: System Temperatures: cpu: 60.0C mobo: 52.0C
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 167 Uptime: 2 min Memory: 355.2/1505.8MB Client: Shell inxi: 1.7.24
[utente@localhost ~]$
My Pc is working very fine , so far so long, none issue to report with using this new kernel...
bye, NicCo
.
--- Professional experience ---
Kernel designer, engineer, maintainer and tester for ROSA Desktop and OpenMandriva Lx O.S.
--- currently I'm playing with ---
LTS Kernels > Linux 4.1.12-nrjQL <<< Linux 3.18.17-nrjQL <<< Linux 3.14.46-nrjQL
EOL Kernels > Linux 3.19.8-nrjQL <<< Linux 3.17.8-nrjQL <<< Linux 3.15.10-nrjQL
--- Professional experience ---
Kernel designer, engineer, maintainer and tester for ROSA Desktop and OpenMandriva Lx O.S.
--- currently I'm playing with ---
LTS Kernels > Linux 4.1.12-nrjQL <<< Linux 3.18.17-nrjQL <<< Linux 3.14.46-nrjQL
EOL Kernels > Linux 3.19.8-nrjQL <<< Linux 3.17.8-nrjQL <<< Linux 3.15.10-nrjQL
- rolf
- Utente
- Posts: 112
- Joined: 20 May 2009, 3:15
- ROSA: R3 2012.1 x86_64
- OpenMandriva: OMV 2014.0 x86_64
- Kernel: 3.13.11-nrjQL-realti
- Desktop: KDE 4.13.2
- country: USA
Re: Kernel-rtQL 3.8.13 -rt10 -rt11 for ROSA2012 2012.1 OM co
Hi
Is this a distributed iso or the custom configuration only on your machine(s)? Thanks.RosaDesktop.Fresh 2012.1 belka
Re: Kernel-rtQL 3.8.13 -rt10 -rt11 for ROSA2012 2012.1 OM co
Mine? It's the same as yours!rolf wrote:HiIs this a distributed iso or the custom configuration only on your machine(s)? Thanks.RosaDesktop.Fresh 2012.1 belka
try to install this,
Code: Select all
# urpmi inxi
Code: Select all
# inxi -F
.
--- Professional experience ---
Kernel designer, engineer, maintainer and tester for ROSA Desktop and OpenMandriva Lx O.S.
--- currently I'm playing with ---
LTS Kernels > Linux 4.1.12-nrjQL <<< Linux 3.18.17-nrjQL <<< Linux 3.14.46-nrjQL
EOL Kernels > Linux 3.19.8-nrjQL <<< Linux 3.17.8-nrjQL <<< Linux 3.15.10-nrjQL
--- Professional experience ---
Kernel designer, engineer, maintainer and tester for ROSA Desktop and OpenMandriva Lx O.S.
--- currently I'm playing with ---
LTS Kernels > Linux 4.1.12-nrjQL <<< Linux 3.18.17-nrjQL <<< Linux 3.14.46-nrjQL
EOL Kernels > Linux 3.19.8-nrjQL <<< Linux 3.17.8-nrjQL <<< Linux 3.15.10-nrjQL
- rolf
- Utente
- Posts: 112
- Joined: 20 May 2009, 3:15
- ROSA: R3 2012.1 x86_64
- OpenMandriva: OMV 2014.0 x86_64
- Kernel: 3.13.11-nrjQL-realti
- Desktop: KDE 4.13.2
- country: USA
Re: Kernel-rtQL 3.8.13 -rt10 -rt11 for ROSA2012 2012.1 OM co
Code: Select all
System: Host: localhost.localdomain Kernel: 3.6.10-nrj-desktop-1rosa x86_64 (64 bit)
Desktop: KDE 4.10.4 Distro: ROSA Desktop Fresh Free 2012.1 Desktop
Re: Kernel-rtQL 3.8.13 -rt10 -rt11 for ROSA2012 2012.1 OM co
I notice a sure difference, mine is a 32bit installation, yours is 64bit, perhaps is there the reason...rolf wrote:In yours, I see 'belka' and I was wondering about that.Code: Select all
System: Host: localhost.localdomain Kernel: 3.6.10-nrj-desktop-1rosa x86_64 (64 bit) Desktop: KDE 4.10.4 Distro: ROSA Desktop Fresh Free 2012.1 Desktop
perhaps "belka" is a codename used only in 32bit arch, we should verify into another 32bit install
.
--- Professional experience ---
Kernel designer, engineer, maintainer and tester for ROSA Desktop and OpenMandriva Lx O.S.
--- currently I'm playing with ---
LTS Kernels > Linux 4.1.12-nrjQL <<< Linux 3.18.17-nrjQL <<< Linux 3.14.46-nrjQL
EOL Kernels > Linux 3.19.8-nrjQL <<< Linux 3.17.8-nrjQL <<< Linux 3.15.10-nrjQL
--- Professional experience ---
Kernel designer, engineer, maintainer and tester for ROSA Desktop and OpenMandriva Lx O.S.
--- currently I'm playing with ---
LTS Kernels > Linux 4.1.12-nrjQL <<< Linux 3.18.17-nrjQL <<< Linux 3.14.46-nrjQL
EOL Kernels > Linux 3.19.8-nrjQL <<< Linux 3.17.8-nrjQL <<< Linux 3.15.10-nrjQL
- oiram73
- Utente senior
- Posts: 405
- Joined: 5 January 2009, 13:33
- ROSA: -
- OpenMandriva: 2014
- Kernel: 3.19.8-nrjQL-realtim
- Desktop: KDE 4.14.3
- country: Italia
- Location: Perugia
- Contact:
Re: Kernel-rtQL 3.8.13 -rt10 -rt11 for ROSA2012 2012.1 OM co
The situation has remained the same last rt tried both simple -rt and rtQL:
- the old fglrx compile and works well
- jackd holds up very well and does not report xruns
- pulseaudio keeps crashing!
OMA-2014
oiram/bin/selom
Da ognuno secondo le proprie capacità ad ognuno secondo i propri bisogni!
oiram/bin/selom
Da ognuno secondo le proprie capacità ad ognuno secondo i propri bisogni!
Re: Kernel-rtQL 3.8.13 -rt10 -rt11 for ROSA2012 2012.1 OM co
When an OS must go beyond the actual paradigms...
Kernel rtQL (rt + nrjQL) description, targets and goals
Kernel rtQL (rt + nrjQL) description, targets and goals
UPDATE! > rt11-rtQL2
New version of kernel-rtQL3.8.13, this time with the latest -rt11 patch and BFQ v6r2
for a " ROSA RTOS "... > http://en.wikipedia.org/wiki/Real-time_operating_system
Kernel-rtQL 3.8.13 with -rt11 and ROSA -rtQL patches for ROSA Marathon 2012.0, ROSA Fresh 2012.1 and OM cooker
DOWNLOAD:
Build status > https://abf.rosalinux.ru/kernels_38x/Ke ... uild_lists
As usual, all packages can be find in kernels 3.8 repo
http://abf-downloads.rosalinux.ru/kerne ... epository/
If you have enabled the kernel 3.8 repo, fro your Distro/Arch, you can install easily:
Code: Select all
urpmi kernel-rtQL-devel-latest kernel-rtQL-latest
Code: Select all
%changelog
* Wed Jun 19 2013 Nicolo' Costanza <abitrules@yahoo.it> 3.8.13-rt11.rtQL2
+ kernel 3.8.13 (EOL) - update to rt11 plus rtQL2
- Patch 401, 402, 403 replaced > now BFQ is the version updated to v6r2
* rtQL_01-0001-block-cgroups-kconfig-build-bits-for-BFQ-v6r2-3.8.patch
* rtQL_02-0002-block-introduce-the-BFQ-v6r2-I-O-sched-for-3.8.patch
* rtQL_03-0003-block-bfq-add-Early-Queue-Merge-EQM-to-BFQ-v6r2-for-3.8.0.patch
- ---------------------------------------------------------------------
- Kernel 3.8 for mdv 2010.2, 2011.0, cooker, rosa.lts2012.0, rosa2012.1
- MIB (Mandriva International Backports) - http://mib.pianetalinux.org/
- This kernel contains also some other patches to improve the hw support
- ---------------------------------------------------------------------
* Sat Jun 15 2013 Nicolo' Costanza <abitrules@yahoo.it> 3.8.13-rt11.rtQL1
+ kernel 3.8.13 (EOL) - update to rt11 plus rtQL1
- update patch > rtQL_05-tuxonice-for-linux-3.8-13-2013-05-12.patch
- fix > TOI now should be properly conf/enabled > CONFIG_TOI_CORE=y
- ---------------------------------------------------------------------
- Kernel 3.8 for mdv 2010.2, 2011.0, cooker, rosa.lts2012.0, rosa2012.1
- MIB (Mandriva International Backports) - http://mib.pianetalinux.org/
- This kernel contains also some other patches to improve the hw support
- ---------------------------------------------------------------------
* Fri Jun 14 2013 Nicolo' Costanza <abitrules@yahoo.it> 3.8.13-rt10.rtQL2
+ kernel 3.8.13 (EOL) - update to rt10 plus rtQL2
- add patch > rtQL_12-scsi_storvsc_avoid-usage-of-WRITE_SAME.patch:
* that's a fix for the proper installation on Hyper-V machines
- We've received some good suggestions, and all have been accepted
- 1> suggestions and requests received by Per Øyvind Karlsen (POK)
* CONFIG_PM_AUTOSLEEP=y (feature to be tested if does not harm)
* CONFIG_SFI=y
* CONFIG_BLK_DEV_DRBD=m
* # CONFIG_DRBD_FAULT_INJECTION is not set
* CONFIG_HW_RANDOM_TIMERIOMEM=m
* CONFIG_DRM_VIA=m
* CONFIG_FB_ATY128_BACKLIGHT=y
* CONFIG_USB_RIO500=m
* CONFIG_DRM_VMWGFX_FBCON=y
* CONFIG_SND_PCSP=m
* CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0 (=10 will be tested in future)
* CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0 (=10 will be tested in future)
- 2> suggestions from an advanced user to A.Burmashev
* CONFIG_TCP_CONG_ADVANCED=y
* CONFIG_TCP_CONG_BIC=m
* CONFIG_TCP_CONG_CUBIC=y
* CONFIG_TCP_CONG_WESTWOOD=m
* CONFIG_TCP_CONG_HTCP=m
* CONFIG_TCP_CONG_HSTCP=m
* CONFIG_TCP_CONG_HYBLA=m
* CONFIG_TCP_CONG_VEGAS=m
* CONFIG_TCP_CONG_SCALABLE=m
* CONFIG_TCP_CONG_LP=m
* CONFIG_TCP_CONG_VENO=m
* CONFIG_TCP_CONG_YEAH=m
* CONFIG_TCP_CONG_ILLINOIS=m
* CONFIG_DEFAULT_CUBIC=y
* # CONFIG_DEFAULT_RENO is not set
- ---------------------------------------------------------------------
- Kernel 3.8 for mdv 2010.2, 2011.0, cooker, rosa.lts2012.0, rosa2012.1
- MIB (Mandriva International Backports) - http://mib.pianetalinux.org/
- This kernel contains also some other patches to improve the hw support
- ---------------------------------------------------------------------
* Sat Jun 01 2013 Nicolo' Costanza <abitrules@yahoo.it> 3.8.13-rt10.rtQL1
+ kernel 3.8.13 (EOL) - update to rt10 plus rtQL1
- enabled TOI / added the TOI (Tux on Linux) full set of config keys
- ---------------------------------------------------------------------
- Kernel 3.8 for mdv 2010.2, 2011.0, cooker, rosa.lts2012.0, rosa2012.1
- MIB (Mandriva International Backports) - http://mib.pianetalinux.org/
- This kernel contains also some other patches to improve the hw support
- ---------------------------------------------------------------------
* Sun May 26 2013 Nicolo' Costanza <abitrules@yahoo.it> 3.8.13-rt9.rtQL1
+ kernel 3.8.13 (EOL) - update to rt9 plus rtQL1
- replaced old -rt8 patch for 3.8.11 with newest -rt9 patch for 3.8.13
- ---------------------------------------------------------------------
- Kernel 3.8 for mdv 2010.2, 2011.0, cooker, rosa.lts2012.0, rosa2012.1
- MIB (Mandriva International Backports) - http://mib.pianetalinux.org/
- This kernel contains also some other patches to improve the hw support
- ---------------------------------------------------------------------
* Sat May 25 2013 Nicolo' Costanza <abitrules@yahoo.it> 3.8.13-rt8.rtQL1
+ kernel 3.8.13 (EOL) - rt8 plus rtQL1
- that's the first release with the kernel-rt 3.8.13 with rt8 & nrjQL:
- experimental new rtQL with CK1, BFQ, TOI, UKSM, AUFS3, for ROSA & OMA
- ---------------------------------------------------------------------
- Kernel 3.8 for mdv 2010.2, 2011.0, cooker, rosa.lts2012.0, rosa2012.1
- MIB (Mandriva International Backports) - http://mib.pianetalinux.org/
- This kernel contains also some other patches to improve the hw support
.
--- Professional experience ---
Kernel designer, engineer, maintainer and tester for ROSA Desktop and OpenMandriva Lx O.S.
--- currently I'm playing with ---
LTS Kernels > Linux 4.1.12-nrjQL <<< Linux 3.18.17-nrjQL <<< Linux 3.14.46-nrjQL
EOL Kernels > Linux 3.19.8-nrjQL <<< Linux 3.17.8-nrjQL <<< Linux 3.15.10-nrjQL
--- Professional experience ---
Kernel designer, engineer, maintainer and tester for ROSA Desktop and OpenMandriva Lx O.S.
--- currently I'm playing with ---
LTS Kernels > Linux 4.1.12-nrjQL <<< Linux 3.18.17-nrjQL <<< Linux 3.14.46-nrjQL
EOL Kernels > Linux 3.19.8-nrjQL <<< Linux 3.17.8-nrjQL <<< Linux 3.15.10-nrjQL