Project name: kernel-vanilla-nrj?
Flavours nr.: there would be two > 'kernel-vanilla-nrj-desktop' and then also 'kernel-vanilla-nrj-laptop'
Devel Status: it's complete at about 100%
Availability: Complete! From ROSA Marathon to ROSA Fresh R1 and naturally also for OM cooker...
Expandibility:
we can prepare a lot of different kernels with the same engine, for example one dedicated to laptops
Goals: having the chance to try ASAP new kernels, also with full Preemption enabled "NRJ v4 mode",
in this way we can start trying the NRJ kernels much before, even up to two months earlier than usual,
we can also verify if some patch used in mainline featured kernel may cause regressions or unstability.
Kernel behaviour: like a vanilla plus a better multitasking and a better multimedia desktop experience!
ABF test: all the builds have been properly rebuilt
https://abf.rosalinux.ru/kernels_3_10x/ ... uild_lists
DOWNLOADS:
http://abf-downloads.rosalinux.ru/kerne ... _personal/
To install (add the repo for your distro / arch, then execute...)
# urpmi kernel-nrj-vanilla-devel-latest kernel-nrj-vanilla-latest
An example, to install 3.10 rc6 on a ROSA Fresh R1 i586
Code: Select all
urpmi.addmedia Kernels_3.10 http://abf-downloads.rosalinux.ru/kernels_3_10x_personal/repository/rosa2012.1/i586/main/release/
urpmi kernel-vanilla-nrj-desktop-devel-latest kernel-vanilla-nrj-desktop-latest
#
In my 32bit laptop, I'm trying
Code: Select all
[root@localhost ~]# urpmi kernel-vanilla-nrj-desktop-devel-latest kernel-vanilla-nrj-desktop-latest
I pacchetti make-3.82-5-rosa2012.1.i586, kernel-firmware-20130307-69.3-mib2012.1.noarch, sysfsutils-2.1.0-20-rosa2012.1.i586, glibc-devel-2.15-8-rosa2012.1.i586, bootloader-utils-1.15-9-rosa2012.1.noarch, perl-5.14.2-8-rosa2012.1.i586, libncurses-devel-5.9-6.20120811.1-rosa2012.1.i586, kmod-9-9-rosa2012.1.i586, gcc-4.7.3_2012.10-3.1-rosa2012.1.i586, dracut-027-4-rosa2012.1.i586 sono già installati
Per soddisfare le dipendenze, saranno installati i seguenti pacchetti:
Pacchetto Versione Release Dist DEpoch Arch.
(supporto "Kernels_3.10")
kernel-vanilla-nrj-desktop-3.> 1 1 rosa 2012.1 i586
kernel-vanilla-nrj-desktop-de> 1 1 rosa 2012.1 i586
kernel-vanilla-nrj-desktop-de> 3.10.0 0.rc6.nrj1de> rosa 2012.1 i586
kernel-vanilla-nrj-desktop-la> 3.10.0 0.rc6.nrj1de> rosa 2012.1 i586
Altri 68MB di spazio disco saranno utilizzati.
verranno scaricati 43MB di pacchetti.
Procedo con l'installazione di 4 pacchetti? (S/n) s
I have installed 3.10 rc6, it installed fine, the reboot went ok, now I'm using it,
and so I have already an early NRJ flavour for the next 3.10 kernel series...
Right now, while I'm writing, here my outputs...
Code: Select all
$ uname -a
Linux localhost.localdomain 3.10.0-0.rc6.nrj1desk1rosa #1 SMP PREEMPT Mon Jun 17 19:18:05 MSK 2013 i686 i686 i686 GNU/Linux
Code: Select all
$ inxi -F
System: Host: localhost.localdomain Kernel: 3.10.0-0.rc6.nrj1desk1rosa i686 (32 bit)
Desktop KDE 4.10.4 Distro: RosaDesktop.Fresh 2012.1 belka
Machine: System: Hewlett-Packard product: HP Compaq nx7300 (RU389ES#ABZ) version: F.08
Mobo: Hewlett-Packard model: 30A2 version: KBC Version 40.17
Bios: Hewlett-Packard version: 68YGU Ver. F.08 date: 10/23/2006
CPU: Single core Intel Celeron M CPU 430 (-UP-) cache: 1024 KB flags: (nx sse sse2 sse3) clocked at 1728.951 MHz
Graphics: Card: Intel Mobile 945GM/GMS 943/940GML Express Integrated Graphics Controller
X.Org: 1.14.1 drivers: intel (unloaded: fbdev,vesa) Resolution: 1280x800@59.9hz
GLX Renderer: Gallium 0.4 on i915 (chipset GLX Version: 2.1 Mesa 9.1.3
Audio: Card: Intel NM10/ICH7 Family High Definition Audio Controller driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture ver: k3.10.0-0.rc6.nrj1desk1rosa
Network: Card-1: Broadcom BCM4401-B0 100Base-TX driver: b44
IF: N/A state: N/A speed: N/A duplex: N/A mac: N/A
Card-2: Broadcom BCM4311 802.11b/g WLAN driver: b43-pci-bridge
IF: N/A state: N/A mac: N/A
Drives: HDD Total Size: 250.1GB (3.9% used) 1: /dev/sda TOSHIBA_MK2555GS 250.1GB
Partition: ID: / size: 20G used: 5.7G (31%) fs: rootfs ID: / size: 20G used: 5.7G (31%) fs: ext4
ID: /home size: 99G used: 3.4G (4%) fs: ext4 ID: swap-1 size: 2.15GB used: 0.00GB (0%) fs: swap
Sensors: System Temperatures: cpu: 61.0C mobo: 55.0C
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 160 Uptime: 3 min Memory: 504.5/1505.8MB Client: Shell inxi: 1.7.24